README.md
The file

perl-5.8.0@18380-os400.tgz

is a GNU zipped tar file of Perl 5.8.0 plus a few hundred maintenance
patches (the patchlevel "@18380" reflects that, the 5.8.0 was
"@17637"). The original Perl 5.8.0 (July 2002) was not available for
OS/400, but shortly thereafter the necessary changes were made to be
able to build Perl in AIX and to use that binary in the OS/400 PASE.

The .tgz file will unpack into a QOpenSys/perl directory, and you
should do the unpacking in the root directory of the PASE environment,
so that the Perl binary ends up in /QOpenSys/perl/bin/perl. See the
end of this file for more information about using Perl in PASE
(the file comes from the post-5.8.0 sources, so they describe how to
do the build from the sources, too), for example how to transfer the
file to PASE. If you don't have gunzip in PASE (to do the .tgz->.tar
conversion), you'll have to do the gunzipping somewhere else first.

The older port of Perl to AS/400 is in the old/ directory. It is an
older version of Perl, version 5.00502 (August 1998), and it is for
the ILE, not for the PASE.

--- README.os400 ---
=head1 NAME

README.os400 - Perl version 5 on OS/400

=head1 DESCRIPTION

This document describes various features of IBM's OS/400 operating
system that will affect how Perl version 5 (hereafter just Perl) is
compiled and/or runs.

By far the easiest way to build Perl for OS/400 is to use the PASE
(Portable Application Solutions Environment), for more information see
http://www.iseries.ibm.com/developer/factory/pase/index.html
This environment allows one to use AIX APIs while programming, and it
provides a runtime that allows AIX binaries to execute directly on the
PowerPC iSeries.

=head2 Compiling Perl for OS/400 PASE

The recommended way to build Perl for the OS/400 PASE is to build the
Perl 5 source code (release 5.8.1 or later) under AIX.

The trick is to give a special parameter to the Configure shell script
when running it on AIX:

sh Configure -DPASE ...

The default installation directory of Perl under PASE is /QOpenSys/perl.
This can be modified if needed with Configure parameter -Dprefix=/some/dir.

Starting from OS/400 V5R2 the IBM Visual Age compiler is supported
on OS/400 PASE, so it is possible to build Perl natively on OS/400.
The easier way, however, is to compile in AIX, as just described.

If you don't want to install the compiled Perl in AIX into /QOpenSys
(for packaging it before copying it to PASE), you can use a Configure
parameter: -Dinstallprefix=/tmp/QOpenSys/perl. This will cause the
"make install" to install everything into that directory, while the
installed files still think they are (will be) in /QOpenSys/perl.

If building natively on PASE, please do the build under the /QOpenSys
directory, since Perl is happier when built on a case sensitive filesystem.

=head2 Installing Perl in OS/400 PASE

If you are compiling on AIX, simply do a "make install" on the AIX box.
Once the install finishes, tar up the /QOpenSys/perl directory. Transfer
the tarball to the OS/400 using FTP with the following commands:

> binary
> site namefmt 1
> put perl.tar /QOpenSys

Once you have it on, simply bring up a PASE shell and extract the tarball.

If you are compiling in PASE, then "make install" is the only thing you
will need to do.

The default path for perl binary is /QOpenSys/perl/bin/perl. You'll
want to symlink /QOpenSys/usr/bin/perl to this file so you don't have
to modify your path.

=head2 Using Perl in OS/400 PASE

Perl in PASE may be used in the same manner as you would use Perl on AIX.

Scripts starting with #!/usr/bin/perl should work if you have
/QOpenSys/usr/bin/perl symlinked to your perl binary. This will not
work if you've done a setuid/setgid or have environment variable
PASE_EXEC_QOPENSYS="N". If you have V5R1, you'll need to get the
latest PTFs to have this feature. Scripts starting with
#!/QOpenSys/perl/bin/perl should always work.

=head2 Known Problems

When compiling in PASE, there is no "oslevel" command. Therefore,
you may want to create a script called "oslevel" that echoes the
level of AIX that your version of PASE runtime supports. If you're
unsure, consult your documentation or use "4.3.3.0".

If you have test cases that fail, check for the existence of spool files.
The test case may be trying to use a syscall that is not implemented
in PASE. To avoid the SIGILL, try setting the PASE_SYSCALL_NOSIGILL
environment variable or have a handler for the SIGILL. If you can
compile programs for PASE, run the config script and edit config.sh
when it gives you the option. If you want to remove fchdir(), which
isn't implement in V5R1, simply change the line that says:

d_fchdir='define'

to

d_fchdir='undef'

and then compile Perl. The places where fchdir() is used have
alternatives for systems that do not have fchdir() available.

=head2 Perl on ILE

There exists a port of Perl to the ILE environment. This port, however,
is based quite an old release of Perl, Perl 5.00502 (August 1998).
(As of July 2002 the latest release of Perl is 5.8.0, and even 5.6.1
has been out since April 2001.) If you need to run Perl on ILE, though,
you may need this older port: http://www.cpan.org/ports/#os400
Note that any Perl release later than 5.00502 has not been ported to ILE.

If you need to use Perl in the ILE environment, you may want to consider
using Qp2RunPase() to call the PASE version of Perl.

=head1 AUTHORS

Jarkko Hietaniemi <jhi@iki.fi>
Bryan Logan <bryanlog@us.ibm.com>
David Larson <larson1@us.ibm.com>

=cut