# packages

pkgId: fee0f9823a9f41777394186a219f32fdcce6bf0744f143517e4b9551899e8ae9
name: python3.9
arch: src
version: 3.9.15
epoch: 0
release: 2.fc37
summary: Version 3.9 of the Python interpreter
url: https://www.python.org/
rpm_license: Python
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/python3.9-3.9.15-2.fc37.src.rpm
checksum_type: sha256
description:
  Python 3.9 package for developers.

  This package exists to allow developers to test their code against an older
  version of Python. This is not a full Python stack and if you wish to run
  your applications with Python 3.9, see other distributions
  that support it, such as CentOS or RHEL or older Fedora releases.


pkgId: 5e63c1d2b81ebc0c7f3edca3f7c3f3e0befb218981ac17cbc5f93e41ee838fc9
name: pytz
arch: src
version: 2022.6
epoch: 0
release: 1.fc37
summary: World Timezone Definitions for Python
url: http://pytz.sourceforge.net/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-26.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/pytz-2022.6-1.fc37.src.rpm
checksum_type: sha256
description:
  pytz brings the Olson tz database into Python. This library allows accurate
  and cross platform timezone calculations using Python 2.3 or higher. It
  also solves the issue of ambiguous times at the end of daylight savings,
  which you can read more about in the Python Library Reference
  (datetime.tzinfo).

  Almost all (over 540) of the Olson timezones are supported.


pkgId: b34584fa1fac9764ea4aef5510020750a5813ea31ffcbfa28aeac4119a2a8677
name: pyzor
arch: src
version: 1.0.0
epoch: 0
release: 32.20200530gitf46159b.fc37
summary: Collaborative spam filtering system
url: https://github.com/SpamExperts/pyzor
rpm_license: GPL-2.0-only
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-22.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/pyzor-1.0.0-32.20200530gitf46159b.fc37.src.rpm
checksum_type: sha256
description:
  Pyzor is a collaborative, networked system to detect
  and block spam using identifying digests of messages.
  Pyzor is similar to Vipul's Razor except implemented
  in python, and using fully open source servers.

  Pyzor can be used either standalone, or to augment the
  spam filtering ability of spamassassin.  spamassassin
  is highly recommended.


pkgId: e700388495a3cbdbe033838e0b678fe05a6b26b97cb62ac9108a855790c3d6d3
name: qalculate-gtk
arch: src
version: 4.4.0
epoch: 0
release: 1.fc37
summary: A multi-purpose desktop calculator for GNU/Linux
url: https://qalculate.github.io/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qalculate-gtk-4.4.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Qalculate! is a multi-purpose desktop calculator for GNU/Linux. It is
  small and simple to use but with much power and versatility underneath.
  Features include customizable functions, units, arbitrary precision, plotting.
  This package provides a (GTK+) graphical interface for Qalculate!


pkgId: 5a67cc869241ffc29cd4d6008cc29466833516db91fbbbbd4d2e720c39a4351d
name: qalculate-qt
arch: src
version: 4.4.0
epoch: 0
release: 1.fc37
summary: A multi-purpose desktop calculator for GNU/Linux
url: https://qalculate.github.io/
rpm_license: GPL-2.0-or-later AND CC0-1.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qalculate-qt-4.4.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Qalculate! is a multi-purpose cross-platform desktop calculator. It is simple
  to use but provides power and versatility normally reserved for complicated
  math packages, as well as useful tools for everyday needs (such as currency
  conversion and percent calculation). Features include a large library of
  customizable functions, unit calculations and conversion, symbolic calculations
  (including integrals and equations), arbitrary precision, uncertainty
  propagation, interval arithmetic, plotting, and a user-friendly interface.

  This package provides a Qt graphical interface for Qalculate!


pkgId: 2785c276ad39779fd8d2823627342dbb32a205d6848ae5faa88861798122a17d
name: qatengine
arch: src
version: 0.6.16
epoch: 0
release: 1.fc37
summary: Intel QuickAssist Technology (QAT) OpenSSL Engine
url: https://github.com/intel/QAT_Engine
rpm_license: BSD and OpenSSL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qatengine-0.6.16-1.fc37.src.rpm
checksum_type: sha256
description:
  This package provides the Intel QuickAssist Technology OpenSSL Engine
  (an OpenSSL Plug-In Engine) which provides cryptographic acceleration
  for both hardware and optimized software using Intel QuickAssist Technology
  enabled Intel platforms.


pkgId: ab215024ffe5f78fc915a2d090af820f2e66e42e08a64600a73914fb4f5fe87e
name: qbittorrent
arch: src
version: 4.4.5
epoch: 1
release: 1.fc37
summary: A Bittorrent Client
url: https://www.qbittorrent.org
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qbittorrent-4.4.5-1.fc37.src.rpm
checksum_type: sha256
description:
  A Bittorrent client using rb_libtorrent and a Qt4 Graphical User Interface.
  It aims to be as fast as possible and to provide multi-OS, unicode support.


pkgId: 7aac0385f0d7b53c94cf38cb155868d66a6f830e5c29995ab2706187bd108d23
name: qbs
arch: src
version: 1.23.2
epoch: 1
release: 1.fc37
summary: Cross platform build tool
url: https://wiki.qt.io/qbs
rpm_license: LGPLv2 with exceptions and LGPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qbs-1.23.2-1.fc37.src.rpm
checksum_type: sha256
description:
  Qbs is a tool that helps simplify the build process for developing projects
  across multiple platforms. Qbs can be used for any software project, regardless
  of programming language, toolkit, or libraries used.

  Qbs is an all-in-one tool that generates a build graph from a high-level
  project description (like qmake or CMake) and additionally undertakes the task
  of executing the commands in the low-level build graph (like make).


pkgId: 2bab5e1fcfd4d5802004467316d8d6a13254aa87bd7ab4fc51adc69fb5e70735
name: qcad
arch: src
version: 3.27.8.0
epoch: 0
release: 1.fc37
summary: Powerful 2D CAD system
url: https://www.qcad.org/
rpm_license: GPLv3 and GPLv2+ and MIT and BSD and Public Domain and CC-BY and Hershey
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qcad-3.27.8.0-1.fc37.src.rpm
checksum_type: sha256
description:
  QCAD is an application for computer aided drafting (CAD) in two dimensions (2D).
  With QCAD you can create technical drawings such as plans for buildings,
  interiors, mechanical parts or schematics and diagrams.
  QCAD was designed with modularity, extensibility and portability in mind.
  But what people notice most often about QCAD is its intuitive
  user interface.
  QCAD is an easy to use but powerful 2D CAD system for everyone.
  You dont need any CAD experience to get started with QCAD immediately.


pkgId: ee277c930a1bca6c40621ec7688cce332fee24735b93c79ca7a3336ff13a7216
name: qdigidoc
arch: src
version: 4.2.12
epoch: 0
release: 2.fc37
summary: Estonian digital signature and encryption application
url: https://github.com/open-eid/DigiDoc4-Client
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qdigidoc-4.2.12-2.fc37.src.rpm
checksum_type: sha256
description:
  DigiDoc4 Client is an application for digitally signing and encrypting
  documents; the software includes functionality to manage Estonian ID-card -
  change pin codes, update certificates etc.


pkgId: f12469e51ce0e38a76557beee2fe6bb2ee8af4b8a9768d3c7cf663e70652a92a
name: qemu
arch: src
version: 7.0.0
epoch: 2
release: 11.fc37
summary: QEMU is a FAST! processor emulator
url: http://www.qemu.org/
rpm_license: GPLv2 and BSD and MIT and CC-BY
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qemu-7.0.0-11.fc37.src.rpm
checksum_type: sha256
description:
  qemu is an open source virtualizer that provides hardware
  emulation for the KVM hypervisor. qemu acts as a virtual
  machine monitor together with the KVM kernel modules, and emulates the
  hardware for a full system such as a PC and its associated peripherals.


pkgId: c3aad6c7817370adbd0d913d0fec349d332608a2965a8cfc312e5a6d0733c99e
name: qflipper
arch: src
version: 1.2.1
epoch: 0
release: 2.fc37
summary: Desktop application for updating Flipper Zero firmware via PC
url: https://update.flipperzero.one
rpm_license: GPLv3 and zlib
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qflipper-1.2.1-2.fc37.src.rpm
checksum_type: sha256
description:
  Graphical desktop application for updating Flipper Zero firmware via PC.

  Features:
  * Update Flipper's firmware and supplemental data with a press of one button
  * Repair a broken fimware installation
  * Stream Flipper's display and control it remotely
  * Install firmware from a .dfu file
  * Backup and restore settings, progress and pairing data
  * Automatic self-update feature
  * Command line interface


pkgId: 2331c0d74f465012eee453502b53c141bc5e2f1f140b310205397a2d995ddb86
name: qgnomeplatform
arch: src
version: 0.9.0
epoch: 0
release: 4.fc37
summary: Qt Platform Theme aimed to accommodate Gnome settings
url: https://github.com/FedoraQt/QGnomePlatform
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qgnomeplatform-0.9.0-4.fc37.src.rpm
checksum_type: sha256
description:
  QGnomePlatform is a Qt Platform Theme aimed to accommodate as much of
  GNOME settings as possibleand utilize them in Qt applications without
  modifying them - making them fit into the environment as well as possible.


pkgId: 97535123ea54b3094772ce1c93f6c0096bbd93eac491038e65e947e8feeb60a3
name: qjackctl
arch: src
version: 0.9.8
epoch: 0
release: 1.fc37
summary: Qt based JACK control application
url: http://qjackctl.sourceforge.net
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qjackctl-0.9.8-1.fc37.src.rpm
checksum_type: sha256
description:
  Qjackctl is a simple application to control the JACK sound server daemon,
  specific for the Linux Audio Desktop infrastructure. It provides a simple GUI
  dialog for setting several JACK daemon parameters, which are properly saved
  between sessions, and a way to control the status of the audio server daemon.
  With time, this primordial interface has become richer by including a enhanced
  patch bay and connection control features.


pkgId: ed7328b30a2d1b91472864d961b4ed33a3aa57410a01ebbac0c54bffea883392
name: qle
arch: src
version: 0.0.18
epoch: 0
release: 31.fc37
summary: A QSO Logger and log Editor
url: http://home.kpn.nl/w.knol18/qle/qle.html
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qle-0.0.18-31.fc37.src.rpm
checksum_type: sha256
description:
  The qle-package is a graphic QSO log viewer, log editor and QSO logger
  for amateur radio operators.

  'qle' stands  for QSO Logger and  Editor. It is a  Perl/Tk script that
  logs (or modifies)  QSOs directly  in a  fast and  light-weight SQLite
  database.

  The term QSO comes from Q code used in commercial and amateur radio
  communication and in refers to a radio contact.

  Intended use: casual logging of  rag-chew and contest QSOs. The logger
  caters for CW operators.

  Table  headings, fonts,  colours and  other  attributes are  set in  a
  user-editable configuration  file. The SQLite log  schema supplied may
  be  altered to  suit your  taste, provided  the configuration  file is
  updated accordingly.


pkgId: df7436f9c9c6c165d04d717eca040e9cef3cc69994371ba0934596954cdd883b
name: qownnotes
arch: src
version: 22.11.5
epoch: 0
release: 1.fc37
summary: Plain-text file markdown note taking with Nextcloud integration
url: https://www.qownnotes.org
rpm_license: MIT and BSD and GPLv2 and GPLv3+ and LGPLv2+ and ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qownnotes-22.11.5-1.fc37.src.rpm
checksum_type: sha256
description:
  QOwnNotes is the open source notepad with markdown support and todo list manager
  for GNU/Linux, Mac OS X and Windows, that works together with the default notes
  application of ownCloud and Nextcloud.

  You are able to write down your thoughts with QOwnNotes and edit or search for
  them later from your mobile device, like with CloudNotes or the
  ownCloud/Nextcloud web-service.

  The notes are stored as plain text files and are synced with
  ownCloud's/Nextcloud's file sync functionality. Of course other software, like
  Syncthing or Dropbox can be used too.

  I like the concept of having notes accessible in plain text files, like it is
  done in the ownCloud/Nextcloud notes apps, to gain a maximum of freedom, but I
  was not able to find a decent desktop note taking tool or a text editor, that
  handles them well. Out of this need QOwnNotes was born.


pkgId: 81ff864078342db6eab2c489fd5854aa5850bc9577bfee85ec35075ec13d1a89
name: qpdfview
arch: src
version: 0.5.0
epoch: 0
release: 0.1.beta1.fc37
summary: Tabbed PDF Viewer
url: https://launchpad.net/qpdfview
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qpdfview-0.5.0-0.1.beta1.fc37.src.rpm
checksum_type: sha256
description:
  qpdfview is a tabbed PDF viewer.
  It uses the Poppler library for rendering and CUPS for printing.
  It provides a clear and simple graphical user interface using the Qt framework.


pkgId: 3a3426415e1c01edad2e8cbfeb7779f312553baa9e775bc900d7b11efd8764db
name: qpwgraph
arch: src
version: 0.3.7
epoch: 0
release: 1.fc37
summary: PipeWire Graph Qt GUI Interface
url: https://gitlab.freedesktop.org/rncbc/qpwgraph
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qpwgraph-0.3.7-1.fc37.src.rpm
checksum_type: sha256
description:
  qpwgraph is a graph manager dedicated to PipeWire, using the Qt C++ framework,
  based and pretty much like the same of QjackCtl.


pkgId: b840e766a2026a1ca3e100cd85da2ee88c7fcb18db59013e32bfb0a05cb07cb1
name: qqc2-desktop-style
arch: src
version: 5.100.0
epoch: 0
release: 1.fc37
summary: QtQuickControls2 style for consistency between QWidget and QML apps
url: https://invent.kde.org/frameworks/qqc2-desktop-style
rpm_license: (LGPLv3 or GPLv3) and LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qqc2-desktop-style-5.100.0-1.fc37.src.rpm
checksum_type: sha256
description:
  This is a style for QtQuickControls 2 that uses QWidget's QStyle for
  painting, making possible to achieve an higher degree of consistency
  between QWidget-based and QML-based apps.


pkgId: 0482db6763bb45be17124a786014a184391a97886ac4b2466af38434228fda9b
name: qsstv
arch: src
version: 9.5.8
epoch: 0
release: 10.fc37
summary: Qt-based slow-scan TV and fax
url: http://users.telenet.be/on4qz/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qsstv-9.5.8-10.fc37.src.rpm
checksum_type: sha256
description:
  Qsstv is a program for receiving slow-scan television and fax. These are
  modes used by hamradio operators. Qsstv uses a soundcard to send and
  receive images.


pkgId: fb295d98c26573fc437c14da109abb2c4a753a7355a306225cf05994361acebf
name: qsynth
arch: src
version: 0.9.8
epoch: 0
release: 1.fc37
summary: Qt based Fluidsynth GUI front end
url: http://qsynth.sourceforge.net
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qsynth-0.9.8-1.fc37.src.rpm
checksum_type: sha256
description:
  QSynth is a fluidsynth GUI front-end application written in C++ around the Qt4
  toolkit using Qt Designer. Eventually it may evolve into a softsynth management
  application allowing the user to control and manage a variety of command line
  softsynth but for the moment it wraps the excellent FluidSynth. FluidSynth is a
  command line software synthesizer based on the Soundfont specification.


pkgId: 0c9061ad655979c18d16b2e78f2f0e18caff13479d4321cd10524cb04a51e48e
name: qt-creator
arch: src
version: 8.0.1
epoch: 0
release: 4.fc37
summary: Cross-platform IDE for Qt
url: https://www.qt.io/ide/
rpm_license: GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt-creator-8.0.1-4.fc37.src.rpm
checksum_type: sha256
description:
  Qt Creator is a cross-platform IDE (integrated development environment)
  tailored to the needs of Qt developers.


pkgId: 1f95ce1cd2cc16be7550018bf4d73397d70aaf103abbd9cbce5fb95bbc3efd05
name: qt5-qt3d
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - Qt3D QML bindings and C++ APIs
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qt3d-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Qt 3D provides functionality for near-realtime simulation systems with
  support for 2D and 3D rendering in both Qt C++ and Qt Quick applications).


pkgId: 5dfd55ba00c6967083e1dbfac0758bcec0938b78964ab39d9f28c92a5f9eb003
name: qt5-qtbase
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - QtBase components
url: http://qt-project.org/
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-32.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtbase-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Qt is a software toolkit for developing applications.

  This package contains base tools, like string, xml, and network
  handling.


pkgId: 1ea60228f3b8a0442c0728090a9d019ee1813bbe7a8814b8418208dc33989aeb
name: qt5-qtcharts
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - Charts component
url: http://www.qt.io
rpm_license: GPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtcharts-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Qt Charts module provides a set of easy to use chart components. It uses the Qt Graphics View Framework, therefore charts can be easily
  integrated to modern user interfaces. Qt Charts can be used as QWidgets, QGraphicsWidget, or QML types.
  Users can easily create impressive graphs by selecting one of the charts themes.


pkgId: 3fe57d1b91df55cde24f225e54a8ff619b03d2fa4719269802c149b6bdc0aaf7
name: qt5-qtdatavis3d
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - Qt Data Visualization component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtdatavis3d-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Qt Data Visualization module provides multiple graph types to visualize data in
  3D space both with C++ and Qt Quick 2.


pkgId: 53c49322c42006a10b992c4a67c88586caa7c3ef589312b0f0abbdb76252831f
name: qt5-qtdoc
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Main Qt5 Reference Documentation
url: http://www.qt.io
rpm_license: GFDL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-29.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtdoc-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  QtDoc contains the main Qt Reference Documentation, which includes
  overviews, Qt topics, and examples not specific to any Qt module.


pkgId: a99a02079c9f9faa178cce126694dff0ded827c0180eb850d44e237b7498a09a
name: qt5-qtgamepad
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - Gamepad component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtgamepad-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Qt Gamepad provides a way to display web content in a QML application without necessarily
  including a full web browser stack by using native APIs where it makes sense.


pkgId: 5b9bc8bc2d7e111cac20003cd432c377022ecdb9bb81658cbc38bbe737cffa0e
name: qt5-qtgraphicaleffects
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - QtGraphicalEffects component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtgraphicaleffects-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The Qt Graphical Effects module provides a set of QML types for adding
  visually impressive and configurable effects to user interfaces. Effects
  are visual items that can be added to Qt Quick user interface as UI
  components.


pkgId: 9efe3e514c85471ccb3497e9e424efccd4ac8c6fdb1608eaf24a2aefc1e0c31a
name: qt5-qtimageformats
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - QtImageFormats component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtimageformats-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The core Qt Gui library by default supports reading and writing image
  files of the most common file formats: PNG, JPEG, BMP, GIF and a few more,
  ref. Reading and Writing Image Files. The Qt Image Formats add-on module
  provides optional support for other image file formats, including:
  MNG, TGA, TIFF, WBMP.


pkgId: 5e8386cc81a1886b58169176b2210f86156bfbb29e2dea6206e049c64b5a852d
name: qt5-qtlocation
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - Location component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtlocation-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The Qt Location and Qt Positioning APIs gives developers the ability to
  determine a position by using a variety of possible sources, including
  satellite, or wifi, or text file, and so on.


pkgId: 495c50eb170905859d969f4a9a007cd0cb1a9b5d89df69f2ad7e88baca3544a8
name: qt5-qtmultimedia
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - Multimedia support
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtmultimedia-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The Qt Multimedia module provides a rich feature set that enables you to
  easily take advantage of a platforms multimedia capabilites and hardware.
  This ranges from the playback and recording of audio and video content to
  the use of available devices like cameras and radios.


pkgId: 5d8c5fe293f8ebe9c1209b1469273554a3f73c134fdfbbc15ea1c2869b15f522
name: qt5-qtquickcontrols
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - module with set of QtQuick controls
url: http://www.qt.io
rpm_license: LGPLv2 or LGPLv3 and GFDL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtquickcontrols-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The Qt Quick Controls module provides a set of controls that can be used to
  build complete interfaces in Qt Quick.


pkgId: 6a7c281a42a91919e055a4f4d67f2c2e6d59e195a752dce626d23548351e0529
name: qt5-qtquickcontrols2
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - module with set of QtQuick controls for embedded
url: http://www.qt.io
rpm_license: GPLv2+ or LGPLv3 and GFDL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtquickcontrols2-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The Qt Labs Controls module provides a set of controls that can be used to
  build complete interfaces in Qt Quick.

  Unlike Qt Quick Controls, these controls are optimized for embedded systems
  and so are preferred for hardware with limited resources.


pkgId: 0c314af13dae75b071edd954f8a0b99a759c2fe29a7045ca3ba0f51950579210
name: qt5-qtscxml
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - ScXml component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtscxml-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The Qt SCXML module provides functionality to create state machines from SCXML files.
  This includes both dynamically creating state machines loading the SCXML file and instantiating states and transitions)
  and generating a C++ file that has a class implementing the state machine.
  It also contains functionality to support data models and executable content.


pkgId: 9a48fb2421ce1c2f121e7f0259e7432e2125c7cbbe04fe92ead0553724805306
name: qt5-qtsensors
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - Sensors component
url: http://www.qt.io/
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtsensors-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The Qt Sensors API provides access to sensor hardware via QML and C++
  interfaces.  The Qt Sensors API also provides a motion gesture recognition
  API for devices.


pkgId: ea8ef85ba74eb1ef7d074e6294014cd8bbbf9f02ad4b9f4e08bb59d5f86ce643
name: qt5-qtserialbus
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - SerialBus component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtserialbus-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Qt Serial Bus (API) provides classes and functions to access the various
  industrial serial buses and protocols, such as CAN, ModBus, and others.


pkgId: 7634fc20be311c38b87b8233fb2e349dba8838f22320fb2af9f697d84c0c711a
name: qt5-qtserialport
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - SerialPort component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtserialport-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Qt Serial Port provides the basic functionality, which includes configuring,
  I/O operations, getting and setting the control signals of the RS-232 pinouts.


pkgId: c8bd789678baaff99ccf25efa8283963c173d449e25becd96525f113bcdd4899
name: qt5-qtspeech
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - Speech component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtspeech-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The module enables a Qt application to support accessibility features such as text-to-speech, which is useful for end-users who are
  visually challenged or cannot access the application for whatever reason. The most common use case where text-to-speech comes in handy
  is when the end-user is driving and cannot attend the incoming messages on the phone. In such a scenario, the messaging application
  can read out the incoming message. Qt Serial Port provides the basic functionality, which includes configuring, I/O operations,
  getting and setting the control signals of the RS-232 pinouts.


pkgId: 7bec1f74c3c135b7c8b10c6f59ff880a559d81d056d7983fe276be419aff7bb9
name: qt5-qtsvg
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - Support for rendering and displaying SVG
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtsvg-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Scalable Vector Graphics (SVG) is an XML-based language for describing
  two-dimensional vector graphics. Qt provides classes for rendering and
  displaying SVG drawings in widgets and on other paint devices.


pkgId: 5cce3d08681438eaf2cf15aa7dbd8df8672a6508842459a89970b8adb575b114
name: qt5-qtvirtualkeyboard
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - VirtualKeyboard component
url: http://qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtvirtualkeyboard-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The Qt Virtual Keyboard project provides an input framework and reference keyboard frontend
  for Qt 5.  Key features include:
  * Customizable keyboard layouts and styles with dynamic switching.
  * Predictive text input with word selection.
  * Character preview and alternative character view.
  * Automatic capitalization and space insertion.
  * Scalability to different resolutions.
  * Support for different character sets (Latin, Simplified/Traditional Chinese, Hindi, Japanese, Arabic, Korean, and others).
  * Support for most common input languages, with possibility to easily extend the language support.
  * Left-to-right and right-to-left input.
  * Hardware key support for 2-way and 5-way navigation.
  * Handwriting support, with gestures for fullscreen input.
  * Audio feedback.


pkgId: 31463f3662f04fe8699c995045d3584b0a7e16b9cb69e07fd98d4fceb74e6318
name: qt5-qtwebchannel
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - WebChannel component
url: http://qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtwebchannel-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The Qt WebChannel module provides a library for seamless integration of C++
  and QML applications with HTML/JavaScript clients. Any QObject can be
  published to remote clients, where its public API becomes available.


pkgId: 70a6be93cfef5c87c8cb8ccbdf36c61479410d8c5cec32d57b469d6fd9c30ca3
name: qt5-qtwebengine
arch: src
version: 5.15.10
epoch: 0
release: 4.fc37
summary: Qt5 - QtWebEngine components
description: Qt5 - QtWebEngine components.
url: http://www.qt.io
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtwebengine-5.15.10-4.fc37.src.rpm
checksum_type: sha256
rpm_license:
  (LGPLv2 with exceptions or GPLv3 with exceptions) and BSD and LGPLv2+ and ASL 2.0 and IJG and MIT and GPLv2+ and ISC and OpenSSL and (MPLv1.1 or GPLv2 or LGPLv2)


pkgId: 85eabcadc5fa867e69933fa09d3e646760b466b9a2d84d0c52ef94c7fe456d1f
name: qt5-qtwebsockets
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - WebSockets component
url: http://qt-project.org/
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtwebsockets-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The QtWebSockets module implements the WebSocket protocol as specified in RFC
  6455. It solely depends on Qt (no external dependencies).


pkgId: 2f14c759a5b0930b621816be8c48bbaee90fe5edbb11363d0dd645ce8d1ad65c
name: qt5-qtwebview
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - WebView component
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtwebview-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Qt WebView provides a way to display web content in a QML application without necessarily
  including a full web browser stack by using native APIs where it makes sense.


pkgId: 37e04da7da55fb3732841fce9ae66ee8df71e8983d5be339113d8b7901d79292
name: qt5-qtx11extras
arch: src
version: 5.15.7
epoch: 0
release: 1.fc37
summary: Qt5 - X11 support library
url: http://www.qt.io
rpm_license: LGPLv2 with exceptions or GPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-03.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5-qtx11extras-5.15.7-1.fc37.src.rpm
checksum_type: sha256
description:
  The X11 Extras module provides features specific to platforms using X11, e.g.
  Linux and UNIX-like systems including embedded Linux systems that use the X
  Window System.


pkgId: 83c3474611c2fb46c7db2fc7064875aea207aba15d1acdf927ccf82cf01916f3
name: qt5ct
arch: src
version: 1.1
epoch: 0
release: 13.fc37
summary: Qt5 Configuration Tool
url: https://sourceforge.net/projects/qt5ct/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt5ct-1.1-13.fc37.src.rpm
checksum_type: sha256
description:
  qt5ct allows users to configure Qt5 settings (theme, font, icons, etc.) under
  DE/WM without Qt integration.


pkgId: de50e1a156d1e768133e3282ac53d2db2df8f6fad50e0bfd0396296670113e3e
name: qt6ct
arch: src
version: 0.7
epoch: 0
release: 0.1.git4e881ab.fc37
summary: Qt6 - Configuration Tool
url: https://github.com/trialuser02/qt6ct
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qt6ct-0.7-0.1.git4e881ab.fc37.src.rpm
checksum_type: sha256
description:
  This program allows users to configure Qt6 settings (theme, font, icons, etc.)
  under DE/WM without Qt integration.


pkgId: 8113900ebbaccd61a52d015a940aa6f26b9448e6ffb6e82f7db7586f83e4fa2a
name: qucs-s
arch: src
version: 1.0.0
epoch: 0
release: 1.fc37
summary: Qucs circuit simulator which works with SPICE
url: https://ra3xdh.github.io/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/qucs-s-1.0.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Qucs-S is a spin-off of the Qucs cross-platform circuit simulator. "S" letter
  indicates SPICE. The purpose of the Qucs-S subproject is to use free SPICE
  circuit simulation kernels with the Qucs GUI. It merges the power of SPICE
  and the simplicity of the Qucs GUI.


pkgId: c98b001d40456de90e242b1737a8e76a062278c848e7e1f7932efd41cc5276ef
name: quisk
arch: src
version: 4.2.11
epoch: 0
release: 1.fc37
summary: Software Defined Radio (SDR) software
url: http://james.ahlstrom.name/quisk/
rpm_license: GPLv2 and BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/q/quisk-4.2.11-1.fc37.src.rpm
checksum_type: sha256
description:
  QUISK is a Software Defined Radio (SDR) which can control various
  radio hardware. QUISK supports CW, SSB, and AM.


pkgId: 5de3f5615f290e9eb6e8184dbc454f96a37eb6de5c9edac7a14f7eb89d0d62bf
name: rEFInd
arch: src
version: 0.13.3.1
epoch: 0
release: 4.fc37
summary: User friendly EFI boot manager
url: http://www.rodsbooks.com/refind/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rEFInd-0.13.3.1-4.fc37.src.rpm
checksum_type: sha256
description:
  A graphical boot manager for EFI- and UEFI-based computers, such as all
  Intel-based Macs and recent (most 2011 and later) PCs. rEFInd presents a
  boot menu showing all the EFI boot loaders on the EFI-accessible
  partitions, and optionally BIOS-bootable partitions on Macs and BIOS boot
  entries on UEFI PCs with CSMs. EFI-compatible OSes, including Linux,
  provide boot loaders that rEFInd can detect and launch. rEFInd can launch
  Linux EFI boot loaders such as ELILO, GRUB Legacy, GRUB 2, and 3.3.0 and
  later kernels with EFI stub support. EFI file system drivers for ext2/3/4fs,
  ReiserFS, Btrfs, NTFS, HFS+, and ISO-9660 enable rEFInd to read boot
  loaders from these file systems, too. rEFInd's ability to detect boot
  loaders at run time makes it very easy to use, particularly when paired with
  Linux kernels that provide EFI stub support.


pkgId: fb6a4425ed504844cbdb49e5687040aaa94daab8f648a1b160b1ab6e10c03577
name: rabbitmq-server
arch: src
version: 3.10.8
epoch: 0
release: 1.fc37
summary: The RabbitMQ server
url: https://www.rabbitmq.com/
rpm_license: MPLv1.1
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rabbitmq-server-3.10.8-1.fc37.src.rpm
checksum_type: sha256
description:
  RabbitMQ is an implementation of AMQP, the emerging standard for high
  performance enterprise messaging. The RabbitMQ server is a robust and
  scalable implementation of an AMQP broker.


pkgId: 6e81fd8fba6798beac369f8301cd6b8821d14cd11d6490503361c749a1f540a5
name: radare2
arch: src
version: 5.7.8
epoch: 0
release: 1.fc37
summary: The reverse engineering framework
url: https://radare.org/
rpm_license: LGPLv3+ and GPLv2+ and BSD and MIT and ASL 2.0 and MPLv2.0 and zlib
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/radare2-5.7.8-1.fc37.src.rpm
checksum_type: sha256
description:
  The radare2 is a reverse-engineering framework that is multi-architecture,
  multi-platform, and highly scriptable.  Radare2 provides a hexadecimal
  editor, wrapped I/O, file system support, debugger support, diffing
  between two functions or binaries, and code analysis at opcode,
  basic block, and function levels.


pkgId: 45f8a85ccd4ce3b2d176e10d1803dd32334ffdbf420e38ff5d1a72e3c6126044
name: raft
arch: src
version: 0.15.0
epoch: 0
release: 1.fc37
summary: C implementation of the Raft consensus protocol
url: https://github.com/canonical/raft
rpm_license: LGPLv3 with exceptions
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/raft-0.15.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Fully asynchronous C implementation of the Raft consensus protocol. It consists
  of a core part that implements the core Raft algorithm logic and a pluggable
  interface defining the I/O implementation for networking and disk persistence.


pkgId: c9753837bfc4ca85bbb5854f9f74038d9f4d3a79b8912a99f1e58adb06eed4fc
name: ravada
arch: src
version: 1.7.7
epoch: 0
release: 1.fc37
summary: Remote Virtual Desktops Manager
url: https://ravada.upc.edu/
rpm_license: AGPL-3.0-only AND Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/ravada-1.7.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Ravada is a software that allows the user to connect to a remote virtual
  desktop.

  In the current release we use the KVM Hypervisors: KVM as the backend for the
  Virtual Machines. LXC support is currently in development.


pkgId: 71c5b39f3ca343422d91c1700ec36319f1b6aee13149877fe36fe4d2bde7d1b8
name: rawtherapee
arch: src
version: 5.9~20221002git4059ae5
epoch: 0
release: 1.fc37
summary: Raw image processing software
url: http://www.rawtherapee.com/
rpm_license: GPLv3 and MIT and IJG
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rawtherapee-5.9~20221002git4059ae5-1.fc37.src.rpm
checksum_type: sha256
description:
  Rawtherapee is a RAW image processing software. It gives full control over
  many parameters to enhance the raw picture before finally exporting it
  to some common image format.


pkgId: 362f4de93d794a3962653db7c4088f5c2c4c8d437371d329319163b8beb2b69d
name: rb_libtorrent
arch: src
version: 2.0.8
epoch: 0
release: 1.fc37
summary: A C++ BitTorrent library aiming to be the best alternative
url: https://www.libtorrent.org
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rb_libtorrent-2.0.8-1.fc37.src.rpm
checksum_type: sha256
description:
  rb_libtorrent is a C++ library that aims to be a good alternative to all
  the other BitTorrent implementations around. It is a library and not a full
  featured client, although it comes with a few working example clients.

  Its main goals are to be very efficient (in terms of CPU and memory usage) as
  well as being very easy to use both as a user and developer.


pkgId: fa7808d717c15e6fcb449463eee5cdd3cb42b9dd1c308d26091f9b81ee05702d
name: rbanffy-3270-fonts
arch: src
version: 3.0.1
epoch: 0
release: 1.fc37
summary: Monospaced font based on IBM 3270 terminals
url: https://github.com/rbanffy/3270font
rpm_license: BSD and OFL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-30.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rbanffy-3270-fonts-3.0.1-1.fc37.src.rpm
checksum_type: sha256
description:
  This font is derived from the x3270 font, which, in turn, was translated from
  the one in Georgia Tech's 3270tool, which was itself hand-copied from a 3270
  terminal.


pkgId: aa86de05d4abdf3ff42b7f7aa8926338c0abae048226581597e953d42d47499f
name: rbenv
arch: src
version: 1.2.0
epoch: 0
release: 1.fc37
summary: Manage your app's Ruby environment
url: https://github.com/rbenv/rbenv
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rbenv-1.2.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Use rbenv to pick a Ruby version for your application and guarantee that your
  development environment matches production. Put rbenv to work with Bundler for
  painless Ruby upgrades and bulletproof deployments.


pkgId: d99e48a22eb743b740fe8dab297b187fa94a205593e63d77e4ac527931281ff2
name: rcs
arch: src
version: 5.10.1
epoch: 0
release: 3.fc37
summary: Revision Control System (RCS) file version management tools
url: http://www.gnu.org/software/rcs/
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rcs-5.10.1-3.fc37.src.rpm
checksum_type: sha256
description:
  The Revision Control System (RCS) is a system for managing multiple
  versions of files.  RCS automates the storage, retrieval, logging,
  identification and merging of file revisions.  RCS is useful for text
  files that are revised frequently (for example, programs,
  documentation, graphics, papers and form letters).

  The rcs package should be installed if you need a system for managing
  different versions of files.


pkgId: d2a1525192db91bdc1872e78d01941c4415621964f590a8c3212e63fb1b13e82
name: rdopkg
arch: src
version: 1.5.1
epoch: 0
release: 1.fc37
summary: RPM packaging automation tool CLI
url: https://github.com/softwarefactory-project/rdopkg
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rdopkg-1.5.1-1.fc37.src.rpm
checksum_type: sha256
description:
  rdopkg is a tool for automating RPM packaging tasks such as managing patches,
  updating to a new version and much more.

  Although it contains several RDO-specific actions, most of rdopkg
  functionality can be used for any RPM package following conventions
  described in the rdopkg manual.

  This package contains rdopkg executable, man pages and docs.


pkgId: dd28c7063e6be3fbf9149e27657f6399b9b1bb892d30a84ddbcf4d4debf8e844
name: readline
arch: src
version: 8.2
epoch: 0
release: 2.fc37
summary: A library for editing typed command lines
url: https://tiswww.case.edu/php/chet/readline/rltop.html
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/readline-8.2-2.fc37.src.rpm
checksum_type: sha256
description:
  The Readline library provides a set of functions that allow users to
  edit command lines. Both Emacs and vi editing modes are available. The
  Readline library includes additional functions for maintaining a list
  of previously-entered command lines for recalling or editing those
  lines, and for performing csh-like history expansion on previous
  commands.


pkgId: 06ec11d10e36c695e185e8d309b5a9f774ae34cd896a88bbe620f6a2ac0948f0
name: recoll
arch: src
version: 1.33.2
epoch: 0
release: 1.fc37
summary: Desktop full text search tool with Qt GUI
url: https://www.lesbonscomptes.com/recoll/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/recoll-1.33.2-1.fc37.src.rpm
checksum_type: sha256
description:
  Recoll is a personal full text search package for Linux, FreeBSD and
  other Unix systems. It is based on a very strong back end (Xapian), for
  which it provides an easy to use, feature-rich, easy administration
  interface.


pkgId: 2400ae36577d1829ad325d3a351cb43764493615cd5cba0598504a6676a56aae
name: rednotebook
arch: src
version: 2.26
epoch: 0
release: 1.fc37
summary: Daily journal with calendar, templates and keyword searching
url: http://rednotebook.sourceforge.net
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rednotebook-2.26-1.fc37.src.rpm
checksum_type: sha256
description:
  RedNotebook is a modern desktop journal. It lets you format, tag and
  search your entries. You can also add pictures, links and customizable
  templates, spell check your notes, and export to plain text, HTML,
  Latex or PDF.


pkgId: 86433569117640e8c07bc2355dd355eadf532679257fc3b055ff4a75da88c3b2
name: regina-rexx
arch: src
version: 3.9.5
epoch: 0
release: 1.fc37
summary: Regina Rexx Interpreter
url: https://regina-rexx.sourceforge.io
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/regina-rexx-3.9.5-1.fc37.src.rpm
checksum_type: sha256
description:
  Regina is a Rexx interpreter that has been ported to most Unix platforms and
  operating systems. Rexx is a programming language that was designed to be easy
  to use for inexperienced programmers yet powerful enough for experienced users.
  It is also a language ideally suited as a macro language for other applications.

rpm_license:
  LGPL-2.0-only and LGPL-2.0-or-later and LGPL-2.1-or-later and MPL-1.0 and GPL-2.0-or-later and BSD-4-Clause and Unlicense


pkgId: 55ea75fa9240c84139bc055abdc6f6c5582c31363292e3c010d814556df85ee1
name: remmina
arch: src
version: 1.4.27
epoch: 0
release: 6.fc37
summary: Remote Desktop Client
url: https://remmina.org
rpm_license: GPLv2+ and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/remmina-1.4.27-6.fc37.src.rpm
checksum_type: sha256
description:
  Remmina is a remote desktop client written in GTK+, aiming to be useful for
  system administrators and travelers, who need to work with lots of remote
  computers in front of either large monitors or tiny net-books.

  Remmina supports multiple network protocols in an integrated and consistent
  user interface. Currently RDP, VNC and SSH are supported.

  Please don't forget to install the plugins for the protocols you want to use.


pkgId: 3579857de0f0450bc3e0685eb45b9f80c989100f1b098c37237884886f4ac908
name: reprotest
arch: src
version: 0.7.22
epoch: 0
release: 1.fc37
summary: Build packages and check them for reproducibility
url: https://salsa.debian.org/reproducible-builds/reprotest
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/reprotest-0.7.22-1.fc37.src.rpm
checksum_type: sha256
description:
  reprotest builds the same source code twice in different environments, and
  then checks the binaries produced by each build for differences. If any are
  found, then diffoscope (or if unavailable then diff) is used to display them
  in detail for later analysis.

  It supports different types of environment such as a "null" environment (i.e.
  doing the builds directly in /tmp) or various other virtual servers, for
  example schroot, ssh, qemu, and several others.

  reprotest is developed as part of the "reproducible builds" Debian project.


pkgId: fd750601f669ff879f29774fde538dc35d751341a6332b2923e6da45683db997
name: resalloc
arch: src
version: 4.8
epoch: 0
release: 1.fc37
summary: Resource allocator for expensive resources - client tooling
url: https://github.com/praiskup/resalloc
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-28.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/resalloc-4.8-1.fc37.src.rpm
checksum_type: sha256
description:
  The resalloc project aims to help with taking care of dynamically
  allocated resources, for example ephemeral virtual machines used for
  the purposes of CI/CD tasks.

  The resalloc package provides the client-side tooling.


pkgId: a19fd4777361667cea2acea82385f8e56681dbb6bdf9a66ca427f47e38ac12d6
name: restic
arch: src
version: 0.14.0
epoch: 0
release: 1.fc37
summary: Fast, secure, efficient backup program
url: https://github.com/restic/restic
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/restic-0.14.0-1.fc37.src.rpm
checksum_type: sha256
description:
  A backup program that is easy, fast, verifiable, secure, efficient and free.

  Backup destinations can be:
  *Local
  *SFTP
  *REST Server
  *Amazon S3
  *Minio Server
  *OpenStack Swift
  *Backblaze B2
  *Microsoft Azure Blob Storage
  *Google Cloud Storage
  *Other Services via rclone


pkgId: ab74e89d488122e4ffe96df997374219f41243a2ffd248f6e10de97dc7cd7a47
name: retrace-server
arch: src
version: 1.24.2
epoch: 0
release: 1.fc37
summary: Application for remote coredump analysis
url: https://github.com/abrt/retrace-server
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/retrace-server-1.24.2-1.fc37.src.rpm
checksum_type: sha256
description:
  The retrace server provides a coredump analysis and backtrace
  generation service over a network using HTTP protocol.


pkgId: 0c3a37be98aab1a7b1d1c78bf48b49931eb0238f278010f2cb6b85854ae68911
name: retroarch
arch: src
version: 1.12.0
epoch: 0
release: 3.fc37
summary: Cross-platform, sophisticated frontend for the libretro API.
url: https://www.libretro.com/
rpm_license: GPLv3+ and GPLv2 and CC-BY and CC0 and BSD and ASL 2.0 and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/retroarch-1.12.0-3.fc37.src.rpm
checksum_type: sha256
description:
  libretro is an API that exposes generic audio/video/input callbacks. A frontend
  for libretro (such as RetroArch) handles video output, audio output, input and
  application lifecycle. A libretro core written in portable C or C++ can run
  seamlessly on many platforms with very little to no porting effort.

  While RetroArch is the reference frontend for libretro, several other projects
  have used the libretro interface to include support for emulators and/or game
  engines. libretro is completely open and free for anyone to use.

  To download and install more libretro cores please read included README.Fedora
  file:

    $ xdg-open /usr/share/doc/retroarch/README.fedora.md


pkgId: f33840038bfae8a168de49617bc7694791691c68f4faf3379a8f424584968349
name: retsnoop
arch: src
version: 0.9.3
epoch: 0
release: 2.fc37
summary: A tool for investigating kernel error call stacks
url: https://github.com/anakryiko/retsnoop
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/retsnoop-0.9.3-2.fc37.src.rpm
checksum_type: sha256
description:
  retsnoop is BPF-based tool that is meant to help debugging kernel issues. It
  allows to capture call stacks of kernel functions that return errors (NULL or
  -Exxx) and emits every such detected call stack, along with the captured
  results.

rpm_license:
  BSD-2-Clause AND (LGPL-2.1-only OR BSD-2-Clause) AND (Apache-2.0 OR MIT) AND MIT AND (0BSD OR Apache-2.0 OR MIT) AND (MIT OR Unlicense) AND (Apache-2.0 OR MIT OR Zlib) AND (MIT OR Apache-2.0) AND Unicode-DFS-2016


pkgId: c0db424e3ab2b4a02b815d0516a9f05027d465e74eb80fb5beb96bb63ee70584
name: rgbds
arch: src
version: 0.6.0
epoch: 0
release: 2.fc37
summary: A development package for the Game Boy, including an assembler
url: https://github.com/gbdev/rgbds
rpm_license: DWPL and ISC and MIT and BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rgbds-0.6.0-2.fc37.src.rpm
checksum_type: sha256
description:
  RGBDS (Rednex Game Boy Development System) is a free assembler/linker package
  for the Game Boy and Game Boy Color.

  It consists of:

  * rgbasm (assembler)
  * rgblink (linker)
  * rgbfix (checksum/header fixer)
  * rgbgfx (PNG‐to‐2bpp graphics converter)


pkgId: 49c1327ee6b28723d750b459accd18bbaf1148eaad7b2bc1f2d41bd0b97604c2
name: river
arch: src
version: 0.1.3
epoch: 0
release: 1.fc37
summary: Dynamic tiling Wayland compositor
url: https://github.com/riverwm/river
rpm_license: GPL-3.0-only and HPND-sell-variant and ISC and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/river-0.1.3-1.fc37.src.rpm
checksum_type: sha256
description:
  river is a dynamic tiling wayland compositor that takes inspiration
  from dwm and bspwm.

  Design goals:
   * Simplicity and minimalism, river should not overstep the bounds
     of a window manager.
   * Window management based on a stack of views and tags.
   * Dynamic layouts generated by external, user-written executables.
     (A default rivertile layout generator is provided.)
   * Scriptable configuration and control through a custom wayland
     protocol and separate riverctl binary implementing it.


pkgId: 4fc1f4c3cacfe034e8402c6b49e4f1bd95b8593bf26cc9e4b2055de9b6038eb8
name: rlwrap
arch: src
version: 0.45.2
epoch: 0
release: 3.fc37
summary: Wrapper for GNU readline
url: https://github.com/hanslub42/rlwrap
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rlwrap-0.45.2-3.fc37.src.rpm
checksum_type: sha256
description:
  rlwrap is a 'readline wrapper' that uses the GNU readline library to
  allow the editing of keyboard input for any other command. Input
  history is remembered across invocations, separately for each command;
  history completion and search work as in bash and completion word
  lists can be specified on the command line.


pkgId: 8e509966d7d270c0a8cb14dc804e70d3314f792fbd87605a2c04ec57ee55ab19
name: rocm-device-libs
arch: src
version: 5.3.0
epoch: 0
release: 1.fc37
summary: AMD ROCm LLVM bit code libraries
url: https://github.com/RadeonOpenCompute/ROCm-Device-Libs
rpm_license: NCSA
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rocm-device-libs-5.3.0-1.fc37.src.rpm
checksum_type: sha256
description:
  This package contains a set of AMD specific device-side language runtime
  libraries in the form of bit code. Specifically:
   - Open Compute library controls
   - Open Compute Math library
   - Open Compute Kernel library
   - OpenCL built-in library
   - HIP built-in library
   - Heterogeneous Compute built-in library


pkgId: 96f3291b561013d058cc353ee35209f8e4daa2139ed3f54c96d748c782908dbd
name: rocm-runtime
arch: src
version: 5.3.0
epoch: 0
release: 2.fc37
summary: ROCm Runtime Library
url: https://github.com/RadeonOpenCompute/ROCR-Runtime
rpm_license: NCSA
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rocm-runtime-5.3.0-2.fc37.src.rpm
checksum_type: sha256
description:
  The ROCm Runtime Library is a thin, user-mode API that exposes the necessary
  interfaces to access and interact with graphics hardware driven by the AMDGPU
  driver set and the AMDKFD kernel driver. Together they enable programmers to
  directly harness the power of AMD discrete graphics devices by allowing host
  applications to launch compute kernels directly to the graphics hardware.


pkgId: a1e3d32e7c6e6bc8ff0bc77393a94a5c295662753b559a6eeec8d6c422b6e451
name: root
arch: src
version: 6.26.08
epoch: 0
release: 2.fc37
summary: Numerical data analysis framework
url: https://root.cern/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/root-6.26.08-2.fc37.src.rpm
checksum_type: sha256
description:
  The ROOT system provides a set of object oriented frameworks with all
  the functionality needed to handle and analyze large amounts of data
  in a very efficient way. Having the data defined as a set of objects,
  specialized storage methods are used to get direct access to the
  separate attributes of the selected objects, without having to touch
  the bulk of the data. Included are histogramming methods in an
  arbitrary number of dimensions, curve fitting, function evaluation,
  minimization, graphics and visualization classes to allow the easy
  setup of an analysis system that can query and process the data
  interactively or in batch mode, as well as a general parallel
  processing framework, PROOF, that can considerably speed up an
  analysis.

  Thanks to the built-in C++ interpreter cling, the command, the
  scripting and the programming language are all C++. The interpreter
  allows for fast prototyping of the macros since it removes the, time
  consuming, compile/link cycle. It also provides a good environment to
  learn C++. If more performance is needed the interactively developed
  macros can be compiled using a C++ compiler via a machine independent
  transparent compiler interface called ACliC.

  The system has been designed in such a way that it can query its
  databases in parallel on clusters of workstations or many-core
  machines. ROOT is an open system that can be dynamically extended by
  linking external libraries. This makes ROOT a premier platform on
  which to build data acquisition, simulation and data analysis systems.


pkgId: 2edc9ed3d573ac668ee73a04a52d8399bbb6adab3263d4a5a44e93f3c8500a0f
name: rpm-ostree
arch: src
version: 2022.15
epoch: 0
release: 3.fc37
summary: Hybrid image/package system
url: https://github.com/coreos/rpm-ostree
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rpm-ostree-2022.15-3.fc37.src.rpm
checksum_type: sha256
description:
  rpm-ostree is a hybrid image/package system.  It supports
  "composing" packages on a build server into an OSTree repository,
  which can then be replicated by client systems with atomic upgrades.
  Additionally, unlike many "pure" image systems, with rpm-ostree
  each client system can layer on additional packages, providing
  a "best of both worlds" approach.


pkgId: fa779ac6d4c6dc16398bdacf96a4ace12f3482acbaf10b77cd9685ea1eee10c5
name: rpmbuild-order
arch: src
version: 0.4.10
epoch: 0
release: 1.fc37
summary: Sort RPM packages in dependency order
url: https://hackage.haskell.org/package/rpmbuild-order
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rpmbuild-order-0.4.10-1.fc37.src.rpm
checksum_type: sha256
description:
  The rpmbuild-order tool sorts source RPM packages by build dependencies, so
  that they can be built in a correct order. It does this by reading RPM package
  spec files and then topologically sorts them according to their build
  dependencies. The code evolved from cabal-sort by Henning Thielemann.
  It can also order the dependencies or reverse depends of one or more packages
  among the packages checked out in neighboring directories (which can be useful
  to see what packages are affected when a low-level package changes).
  It also has support for setting RPM options for bcond etc, which can affect
  dependencies. It can also output dependency graphs. Since version 0.4, a
  library API is also provided.


pkgId: 2256c6ef1c57e5ec3e5c3c75f5d3c8bf13ec771ea0cabebc173faf803d2b70d8
name: rpmconf
arch: src
version: 1.1.7
epoch: 0
release: 1.fc37.1
summary: Tool to handle rpmnew and rpmsave files
url: https://github.com/xsuchy/rpmconf
rpm_license: GPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rpmconf-1.1.7-1.fc37.1.src.rpm
checksum_type: sha256
description:
  This tool search for .rpmnew, .rpmsave and .rpmorig files and ask you what to do
  with them:
  Keep current version, place back old version, watch the diff or merge.


pkgId: 647d0b48cf9f483f25a199d79ee785905f601bad00c1e0c644dad0026b8559ff
name: rpmdistro-repoquery
arch: src
version: 0^20220419git2aff449
epoch: 0
release: 1.fc37
summary: Tool to easily do repository queries for different distributions using DNF
url: https://pagure.io/rpmdistro-repoquery
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-28.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rpmdistro-repoquery-0^20220419git2aff449-1.fc37.src.rpm
checksum_type: sha256
description:
  This tool utilizes DNF to let you query across several RPM-based Linux
  distributions.

  Currently, the tool supports the following distributions:

  * Fedora
  * Mageia
  * openSUSE Leap
  * openSUSE Tumbleweed
  * CentOS (with EPEL)
  * CentOS Stream (with EPEL)
  * Red Hat Enterprise Linux Universal Base Image (RHEL UBI)
  * SUSE Linux Enterprise Base Container Image (SLE BCI)


pkgId: b20450eed082ec69d8890e913aa9878a03ae64454cbf51b7ff4590796af1c51c
name: rpy
arch: src
version: 3.5.3
epoch: 0
release: 2.fc37
summary: Python interface to the R language
url: https://pypi.python.org/pypi/rpy2
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-32.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rpy-3.5.3-2.fc37.src.rpm
checksum_type: sha256
description:
  RPy provides a robust Python interface to the R
  programming language.  It can manage all kinds of R objects and can
  execute arbitrary R functions. All the errors from the R language are
  converted to Python exceptions.


pkgId: b2c6c8d4c11a51049172e1b520779b0488e00c5d2619b9b122df7a60e1907025
name: rsms-inter-fonts
arch: src
version: 3.19
epoch: 0
release: 5.fc37
summary: The Inter font family
url: https://rsms.me/inter/
rpm_license: OFL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rsms-inter-fonts-3.19-5.fc37.src.rpm
checksum_type: sha256
description:
  Inter is a typeface specially designed for user interfaces with focus on high
  legibility of small-to-medium sized text on computer screens.

  The family features a tall x-height to aid in readability of mixed-case and
  lower-case text. Several OpenType features are provided as well, like contextual
  alternates that adjusts punctuation depending on the shape of surrounding
  glyphs, slashed zero for when you need to disambiguate "0" from "o", tabular
  numbers, etc.


pkgId: fb535789d2c12b00fc876e2e9de1d67d6c89e06acb0f4abd763abf49a3751fa3
name: rsnapshot
arch: src
version: 1.4.4
epoch: 0
release: 1.fc37
summary: Local and remote filesystem snapshot utility
url: https://rsnapshot.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rsnapshot-1.4.4-1.fc37.src.rpm
checksum_type: sha256
description:
  This is a remote backup program that uses rsync to take backup snapshots of
  filesystems.  It uses hard links to save space on disk.


pkgId: eb7e4ad8573fb7163265dc69e230292f5edd9e4b62f2b187e5ee48a80fc6ec55
name: rssguard
arch: src
version: 4.2.5
epoch: 0
release: 1.fc37
summary: Simple yet powerful feed reader
url: https://github.com/martinrotter/rssguard
rpm_license: GPL-3.0-or-later AND BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rssguard-4.2.5-1.fc37.src.rpm
checksum_type: sha256
description:
  RSS Guard is simple, light and easy-to-use RSS/ATOM feed aggregator developed
  using Qt framework which supports online feed synchronization.


pkgId: aae0f2f805412fe6af95d2be4ed2d54f4a26c198021fd41620346c394b4b703e
name: rsync
arch: src
version: 3.2.7
epoch: 0
release: 1.fc37
summary: A program for synchronizing files over a network
url: https://rsync.samba.org/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rsync-3.2.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Rsync uses a reliable algorithm to bring remote and host files into
  sync very quickly. Rsync is fast because it just sends the differences
  in the files over the network instead of sending the complete
  files. Rsync is often used as a very powerful mirroring process or
  just as a more capable replacement for the rcp command. A technical
  report which describes the rsync algorithm is included in this
  package.


pkgId: 438401efa61a6090d81dbb56da0411b51aea26f587ac5ab013e3c93251dcab72
name: rtaudio
arch: src
version: 5.2.0
epoch: 0
release: 1.fc37
summary: Real-time Audio I/O Library
url: http://www.music.mcgill.ca/~gary/rtaudio/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rtaudio-5.2.0-1.fc37.src.rpm
checksum_type: sha256
description:
  RtAudio is a set of C++ classes that provide a common API for realtime audio
  input/output across different operating systems. RtAudio significantly
  simplifies the process of interacting with computer audio hardware. It was
  designed with the following objectives:

    * object-oriented C++ design
    * simple, common API across all supported platforms
    * allow simultaneous multi-api support
    * support dynamic connection of devices
    * provide extensive audio device parameter control
    * allow audio device capability probing
    * automatic internal conversion for data format, channel number compensation,
      (de)interleaving, and byte-swapping


pkgId: fd4e008389849df67e982639a0b9252865a29af13ae438fb8b1b3f10e5b047df
name: rubberband
arch: src
version: 3.1.0
epoch: 0
release: 2.fc37
summary: Audio time-stretching and pitch-shifting library
url: http://www.breakfastquay.com/rubberband/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubberband-3.1.0-2.fc37.src.rpm
checksum_type: sha256
description:
  Rubber Band is a library and utility program that permits you to change the
  tempo and pitch of an audio recording independently of one another.


pkgId: 0ea1c75cbeb8351f8010b7ad23ebd2e19758407db4df5b1842dcea8a0a7c3858
name: ruby-build
arch: src
version: 20221004
epoch: 0
release: 1.fc37
summary: Compile and install Ruby
url: https://github.com/rbenv/ruby-build
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/ruby-build-20221004-1.fc37.src.rpm
checksum_type: sha256
description:
  ruby-build is a command-line utility that makes it easy to install virtually
  any version of Ruby, from source.


pkgId: c93f563ba2361b443a2a93b2c79f0ead6c8198be0b6f0e6da05b92f21fcb2a85
name: rubygem-hoe
arch: src
version: 3.26.0
epoch: 0
release: 1.fc37
summary: Hoe is a simple rake/rubygems helper for project Rakefiles
url: http://rubyforge.org/projects/seattlerb/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-hoe-3.26.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Hoe is a rake/rubygems helper for project Rakefiles. It helps generate
  rubygems and includes a dynamic plug-in system allowing for easy
  extensibility. Hoe ships with plug-ins for all your usual project
  tasks including rdoc generation, testing, packaging, and deployment.
  Plug-ins Provided:
  * Hoe::Clean
  * Hoe::Debug
  * Hoe::Deps
  * Hoe::Flay
  * Hoe::Flog
  * Hoe::Inline
  * Hoe::Package
  * Hoe::Publish
  * Hoe::RCov
  * Hoe::Signing
  * Hoe::Test
  See class rdoc for help. Hint: ri Hoe


pkgId: e1c7122fbaf6b01e644b64e7a0ef345118f3f06f62dade546921d06e6ae4c26a
name: rubygem-image_size
arch: src
version: 3.2.0
epoch: 0
release: 1.fc37
summary: Measure image size using pure Ruby
url: https://github.com/toy/image_size
rpm_license: Ruby or GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-36.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-image_size-3.2.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Measure following file dimensions: apng, bmp, cur, emf, gif, ico, j2c, jp2,
  jpeg, jpx, mng, pam, pbm, pcx, pgm, png, ppm, psd, svg, swf, tiff, webp, xbm,
  xpm.


pkgId: 5768d3568f384c39135cc33cf98f1a4e321fd7ea87ba857d6068ed46d4967226
name: rubygem-jekyll
arch: src
version: 4.3.1
epoch: 0
release: 1.fc37
summary: Simple, blog aware, static site generator
url: https://github.com/jekyll/jekyll
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-jekyll-4.3.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Jekyll is a simple, blog-aware, static site generator.

  You create your content as text files (Markdown), and organize them into
  folders. Then, you build the shell of your site using Liquid-enhanced
  HTML templates. Jekyll automatically stitches the content and templates
  together, generating a website made entirely of static assets, suitable
  for uploading to any server.


pkgId: 079425867fb94553a915c16eef9f8293333e78c94052c7653d5cd5248d50daf4
name: rubygem-nokogiri
arch: src
version: 1.13.9
epoch: 0
release: 1.fc37
summary: An HTML, XML, SAX, and Reader parser
url: https://nokogiri.org
rpm_license: MIT and ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-nokogiri-1.13.9-1.fc37.src.rpm
checksum_type: sha256
description:
  Nokogiri parses and searches XML/HTML very quickly, and also has
  correctly implemented CSS3 selector support as well as XPath support.

  Nokogiri also features an Hpricot compatibility layer to help ease the change
  to using correct CSS and XPath.


pkgId: e17448992c87c77f39aeb63846353f99316f8912e1198b25e525b3b6788165ff
name: rubygem-pdfkit
arch: src
version: 0.8.7.2
epoch: 0
release: 1.fc37
summary: HTML+CSS to PDF using wkhtmltopdf
url: https://github.com/pdfkit/pdfkit
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-pdfkit-0.8.7.2-1.fc37.src.rpm
checksum_type: sha256
description:
  Create PDFs using plain old HTML+CSS. Uses wkhtmltopdf
  on the back-end which renders HTML using Webkit.


pkgId: d3387f3d34b73bfdd68aefb517a6ed08fa00ddaeba25f980cd1fc816b2600d1b
name: rubygem-power_assert
arch: src
version: 2.0.2
epoch: 0
release: 200.fc37
summary: Power Assert for Ruby
url: https://github.com/ruby/power_assert
rpm_license: Ruby or BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-30.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-power_assert-2.0.2-200.fc37.src.rpm
checksum_type: sha256
description:
  Power Assert for Ruby. Power Assert shows each value of variables and method
  calls in the expression. It is useful for testing, providing which value
  wasn't correct when the condition is not satisfied.


pkgId: f87dcca2c61e450fb030d98dae42b9d08db202296d0dbfb0b1982550131d4e61
name: rubygem-red-colors
arch: src
version: 0.3.0
epoch: 0
release: 6.fc37
summary: Red Colors provides a wide array of features for dealing with colors
url: https://github.com/red-data-tools/red-colors
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-23.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-red-colors-0.3.0-6.fc37.src.rpm
checksum_type: sha256
description:
  Red Colors provides a wide array of features for dealing with colors. This
  includes conversion between colorspaces, desaturation, and parsing colors.


pkgId: bcca7fd39226d84c0fbc13877b2f1f4790483d334964ec61e1889ffc5ef57104
name: rubygem-rspec-expectations
arch: src
version: 3.12.0
epoch: 0
release: 1.fc37
summary: RSpec expectations (should and matchers)
url: http://github.com/rspec/rspec-expectations
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-27.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-rspec-expectations-3.12.0-1.fc37.src.rpm
checksum_type: sha256
description:
  rspec-expectations adds `should` and `should_not` to every object and includes
  RSpec::Matchers, a library of standard matchers.


pkgId: 8e9f290b23a4ae749a8138792b5cbdbf7711e9304e5649c804c39dbd9953c8e2
name: rubygem-rspec-mocks
arch: src
version: 3.12.0
epoch: 0
release: 2.fc37
summary: RSpec's 'test double' framework (mocks and stubs)
url: http://github.com/rspec/rspec-mocks
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-rspec-mocks-3.12.0-2.fc37.src.rpm
checksum_type: sha256
description:
  rspec-mocks provides a test-double framework for rspec including support
  for method stubs, fakes, and message expectations.


pkgId: 39676c30e8246e516076edaff805f21009d7dabf455f6d8fe04e15377c5bbc9f
name: rubygem-rspec-support
arch: src
version: 3.12.0
epoch: 0
release: 1.fc37
summary: Common functionality to Rspec series
url: https://github.com/rspec/rspec-support
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-29.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-rspec-support-3.12.0-1.fc37.src.rpm
checksum_type: sha256
description:
  `RSpec::Support` provides common functionality to `RSpec::Core`,
  `RSpec::Expectations` and `RSpec::Mocks`. It is considered
  suitable for internal use only at this time.


pkgId: e0465ec24abb4aec91e12c4c51a264c3a91fe8a0122da5a81ba33f6855ee135e
name: rubygem-sugarjar
arch: src
version: 0.0.11
epoch: 0
release: 1.fc37
summary: A git/github helper utility
url: http://www.github.com/jaymzh/sugarjar
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-sugarjar-0.0.11-1.fc37.src.rpm
checksum_type: sha256
description:
  Sugarjar is a utility to help making working with git
  and GitHub easier. In particular it has a lot of features
  to make rebase-based and squash-based workflows simpler.


pkgId: 90d9ccb1ce8dff20ffeed6afcffad9169d9bfa96774864f9648ea5b952451da4
name: rubygem-test-unit
arch: src
version: 3.5.5
epoch: 0
release: 200.fc37
summary: Improved version of Test::Unit bundled in Ruby 1.8.x
url: http://test-unit.github.io/
rpm_license: (BSD or Ruby or Python) and (BSD or Ruby)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-37.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rubygem-test-unit-3.5.5-200.fc37.src.rpm
checksum_type: sha256
description:
  Test::Unit 2.x - Improved version of Test::Unit bundled in
  Ruby 1.8.x.
  Ruby 1.9.x bundles minitest not Test::Unit. Test::Unit
  bundled in Ruby 1.8.x had not been improved but unbundled
  Test::Unit (Test::Unit 2.x) will be improved actively.


pkgId: 77b0d1e5eb701c0f3056c9c93cb02407f5798cfd5e371bff13ddca8466e469b0
name: runc
arch: src
version: 1.1.4
epoch: 2
release: 1.fc37
summary: CLI for running Open Containers
url: https://github.com/opencontainers/runc
rpm_license: ASL 2.0 and BSD and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/runc-1.1.4-1.fc37.src.rpm
checksum_type: sha256
description:
  The runc command can be used to start containers which are packaged
  in accordance with the Open Container Initiative's specifications,
  and to manage containers running under runc.


pkgId: a5c78c79cbb807491da8af7f87e8a22fad42a2718ac90623806e03da86cb134e
name: rust
arch: src
version: 1.65.0
epoch: 0
release: 1.fc37
summary: The Rust Programming Language
url: https://www.rust-lang.org
rpm_license: (ASL 2.0 or MIT) and (BSD and MIT)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-1.65.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Rust is a systems programming language that runs blazingly fast, prevents
  segfaults, and guarantees thread safety.

  This package includes the Rust compiler and documentation generator.


pkgId: 61cf30105498ff2da274b272ba373bd6df4a3f952680c4ab557354ccd5e4c472
name: rust-cc
arch: src
version: 1.0.76
epoch: 0
release: 1.fc37
summary: Build-time dependency for Cargo build scripts to invoke the native C compiler
url: https://crates.io/crates/cc
rpm_license: MIT OR Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-cc-1.0.76-1.fc37.src.rpm
checksum_type: sha256
description:
  Build-time dependency for Cargo build scripts to assist in invoking the native
  C compiler to compile native C code into a static archive to be linked into
  Rust code.


pkgId: d7d09c12e07c46a995af1e633a1c4d34357c9e5142a927d13085495ede777ed0
name: rust-const-oid
arch: src
version: 0.9.0
epoch: 0
release: 1.fc37
summary: Const-friendly implementation of the ISO/IEC Object Identifier (OID) standard
url: https://crates.io/crates/const-oid
rpm_license: Apache-2.0 OR MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-const-oid-0.9.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Const-friendly implementation of the ISO/IEC Object Identifier (OID) standard
  as defined in ITU X.660, with support for BER/DER encoding/decoding as well as
  heapless no_std (i.e. embedded) support.


pkgId: 726f4f20d83290f0060e35d328ea9777a70cb36dbce85c1cbe52e13aa67639f9
name: rust-coreos-installer
arch: src
version: 0.16.1
epoch: 0
release: 2.fc37
summary: Installer for Fedora CoreOS and RHEL CoreOS
url: https://crates.io/crates/coreos-installer
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-coreos-installer-0.16.1-2.fc37.src.rpm
checksum_type: sha256
description:
  coreos-installer installs Fedora CoreOS or RHEL CoreOS to bare-metal
  machines (or, occasionally, to virtual machines).


pkgId: d6c2484fb5987f63c99d78f7aeccdd284ef00d7088aa24580dbac64310574e38
name: rust-image
arch: src
version: 0.24.4
epoch: 0
release: 1.fc37
summary: Imaging library written in Rust
url: https://crates.io/crates/image
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-image-0.24.4-1.fc37.src.rpm
checksum_type: sha256
description:
  Imaging library written in Rust. Provides basic filters and decoders for the
  most common image formats.


pkgId: a73deac74df90131d28a65e3a9f6ce47e4036ef8c7656dad1d80de8707e29099
name: rust-ipnet
arch: src
version: 2.5.1
epoch: 0
release: 1.fc37
summary: Provides types and useful methods for working with IP prefixes
url: https://crates.io/crates/ipnet
rpm_license: MIT OR Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-ipnet-2.5.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Provides types and useful methods for working with IPv4 and IPv6 network
  addresses, commonly called IP prefixes. The new `IpNet`, `Ipv4Net`, and
  `Ipv6Net` types build on the existing `IpAddr`, `Ipv4Addr`, and `Ipv6Addr`
  types already provided in Rust's standard library and align to their design to
  stay consistent. The module also provides useful traits that extend `Ipv4Addr`
  and `Ipv6Addr` with methods for `Add`, `Sub`, `BitAnd`, and `BitOr` operations.
  The module only uses stable feature so it is guaranteed to compile using the
  stable toolchain.


pkgId: 1cb6a1f1ada01880705967829206112a2e5bf8ae1264b65531c59bec4d6b0eaa
name: rust-libloading
arch: src
version: 0.7.4
epoch: 0
release: 1.fc37
summary: Bindings for native dynamic library loading primitives
url: https://crates.io/crates/libloading
rpm_license: ISC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-libloading-0.7.4-1.fc37.src.rpm
checksum_type: sha256
description:
  Bindings around the platform's dynamic library loading primitives with greatly
  improved memory safety.


pkgId: f47d9822d54ab8ce2730a80568b8b20ace9be1309962d0e9b454d0f9e7c69f73
name: rust-packaging
arch: src
version: 23
epoch: 0
release: 1.fc37
summary: RPM macros for building Rust packages
url: https://pagure.io/fedora-rust/rust2rpm
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-32.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-packaging-23-1.fc37.src.rpm
checksum_type: sha256
description:
  The package provides RPM macros for building Rust projects.

  Note that rust-srpm-macros is a seperate arch-independent package that
  is also required to build Rust packages.


pkgId: c2ee6349504fa50a3ec4914e4cfc1bdc563ea9f47c683c8f27818213fb270f2f
name: rust-proc-macro2
arch: src
version: 1.0.46
epoch: 0
release: 1.fc37
summary: Substitute implementation of the Rust compiler's proc_macro API
url: https://crates.io/crates/proc-macro2
rpm_license: MIT OR Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-01.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-proc-macro2-1.0.46-1.fc37.src.rpm
checksum_type: sha256
description:
  Substitute implementation of the compiler's `proc_macro` API to decouple token-
  based libraries from the procedural macro use case.


pkgId: db91cf42e985f4376a78005ac261ff922271c136852b7617aab4527c054b8ae9
name: rust-rgb
arch: src
version: 0.8.34
epoch: 0
release: 1.fc37
summary: Struct RGB/RGBA/etc. for sharing pixels between crates
url: https://crates.io/crates/rgb
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-rgb-0.8.34-1.fc37.src.rpm
checksum_type: sha256
description:
  `struct RGB/RGBA/etc.` for sharing pixels between crates + convenience methods
  for color manipulation. Allows no-copy high-level interoperability. Also adds
  common convenience methods and implements standard Rust traits to make
  `RGB`/`RGBA` pixels and slices first-class Rust objects.


pkgId: 94a87bc494b8d2eb7f3b4279ee95e213b34937888245ec0461b8aeb7c30b7356
name: rust-scoped-tls
arch: src
version: 1.0.1
epoch: 0
release: 1.fc37
summary: Provide scoped access to thread local storage (TLS)
url: https://crates.io/crates/scoped-tls
rpm_license: MIT OR Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-01.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-scoped-tls-1.0.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Library implementation of the standard library's old `scoped_thread_local!`
  macro for providing scoped access to thread local storage (TLS) so any type can
  be stored into TLS.


pkgId: fdba4ccc10ad3920747beb9df0cc2003d8573ce588bc5cf9e9e0c9c04ce4d2b9
name: rust-sha2
arch: src
version: 0.10.6
epoch: 0
release: 1.fc37
summary: Pure Rust implementation of the SHA-2 hash function family
url: https://crates.io/crates/sha2
rpm_license: MIT OR Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-sha2-0.10.6-1.fc37.src.rpm
checksum_type: sha256
description:
  Pure Rust implementation of the SHA-2 hash function family including SHA-224,
  SHA-256, SHA-384, and SHA-512.


pkgId: 66c2627e6653887eadbac5708542d796e60672617dd4f5f8c0f019888716ba38
name: rust-time
arch: src
version: 0.3.15
epoch: 0
release: 1.fc37
summary: Date and time library
url: https://crates.io/crates/time
rpm_license: MIT OR Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-time-0.3.15-1.fc37.src.rpm
checksum_type: sha256
description:
  Date and time library. Fully interoperable with the standard library. Mostly
  compatible with #![no_std].


pkgId: b816fa67adf56e2db972cfb32e3bf2722336d53bc57b33c4431889f6de7ec54a
name: rust-unicode-ident
arch: src
version: 1.0.4
epoch: 0
release: 1.fc37
summary: Determine whether characters have the XID_Start or XID_Continue properties
url: https://crates.io/crates/unicode-ident
rpm_license: (MIT OR Apache-2.0) AND Unicode-DFS-2016
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-unicode-ident-1.0.4-1.fc37.src.rpm
checksum_type: sha256
description:
  Determine whether characters have the XID_Start or XID_Continue properties
  according to Unicode Standard Annex #31.


pkgId: 9ebbde530cbe1b9ccf81dcbbd7acc18cf29b45b462a8edb6d80153cd563ea0fd
name: rust-unicode-normalization
arch: src
version: 0.1.22
epoch: 0
release: 1.fc37
summary: Functions for normalization of Unicode strings
url: https://crates.io/crates/unicode-normalization
rpm_license: MIT OR Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-unicode-normalization-0.1.22-1.fc37.src.rpm
checksum_type: sha256
description:
  Functions for normalization of Unicode strings, including Canonical and
  Compatible Decomposition and Recomposition, as described in Unicode Standard
  Annex #15.


pkgId: 5d4b124009b517acd888de86d2fb17fa583d0a1371ee1637a1bce387bcfbe2a3
name: rust-version-compare
arch: src
version: 0.1.1
epoch: 0
release: 1.fc37
summary: Rust library to easily compare version numbers
url: https://crates.io/crates/version-compare
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/r/rust-version-compare-0.1.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Rust library to easily compare version numbers with no specific format, and
  test against various comparison operators.


pkgId: 5b45b7df5d494ff08a40f32e408e989b213a6e4c638bc636f24d1794ac6d0f1e
name: s3cmd
arch: src
version: 2.3.0
epoch: 0
release: 1.fc37
summary: Tool for accessing Amazon Simple Storage Service
url: https://s3tools.org/s3cmd
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/s3cmd-2.3.0-1.fc37.src.rpm
checksum_type: sha256
description:
  S3cmd lets you copy files from/to Amazon S3
  (Simple Storage Service) using a simple to use
  command line client.


pkgId: 880c9724a660adcf46eb7897331578fb68c396c905e81e48fee63a5b38b5e0fb
name: sakura
arch: src
version: 3.8.6
epoch: 0
release: 1.fc37
summary: Terminal emulator based on GTK and VTE
url: https://launchpad.net/sakura
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sakura-3.8.6-1.fc37.src.rpm
checksum_type: sha256
description:
  Sakura is a terminal emulator based on GTK and VTE. It's a terminal emulator
  with few dependencies, so you don't need a full GNOME desktop installed to
  have a decent terminal emulator.


pkgId: f06a887c553fc97cb3ff1f4bb7fb8b8f3cd152dd9fa604090433704200480d00
name: salt
arch: src
version: 3005.1
epoch: 0
release: 1.fc37
summary: A parallel remote execution system
url: https://saltproject.io/
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: buildvm-ppc64le-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/salt-3005.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Salt is a distributed remote execution system used to execute commands and
  query data. It was developed in order to bring the best solutions found in
  the world of remote execution together and make them better, faster and more
  malleable. Salt accomplishes this via its ability to handle larger loads of
  information, and not just dozens, but hundreds or even thousands of individual
  servers, handle them quickly and through a simple and manageable interface.


pkgId: e02a8960562a979d10502d590fd928a091b42791a4ffbbdaf728044aa8938a5c
name: sane-backends
arch: src
version: 1.1.1
epoch: 0
release: 8.fc37
summary: Scanner access software
url: http://www.sane-project.org
rpm_license: GPLv2+ and GPLv2+ with exceptions and Public Domain and IJG and LGPLv2+ and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sane-backends-1.1.1-8.fc37.src.rpm
checksum_type: sha256
description:
  Scanner Access Now Easy (SANE) is a universal scanner interface.  The
  SANE application programming interface (API) provides standardized
  access to any raster image scanner hardware (flatbed scanner,
  hand-held scanner, video and still cameras, frame-grabbers, etc.).


pkgId: 8355e20e6e277446671798fe003ff38c2a83f3d4f3789b4acdf8f2d3ffd8e62d
name: sasutils
arch: src
version: 0.3.13
epoch: 0
release: 1.fc37
summary: Serial Attached SCSI (SAS) utilities
url: https://github.com/stanford-rc/sasutils
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-25.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sasutils-0.3.13-1.fc37.src.rpm
checksum_type: sha256
description:
  sasutils is a set of command-line tools and a Python library to ease the
  administration of Serial Attached SCSI (SAS) fabrics.


pkgId: 460613e1b69813c3b77d0ae46a1bd14efdb0823d64bdcb6caf2c672b304ff4b2
name: satyr
arch: src
version: 0.40
epoch: 0
release: 1.fc37
summary: Tools to create anonymous, machine-friendly problem reports
url: https://github.com/abrt/satyr
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/satyr-0.40-1.fc37.src.rpm
checksum_type: sha256
description:
  Satyr is a library that can be used to create and process microreports.
  Microreports consist of structured data suitable to be analyzed in a fully
  automated manner, though they do not necessarily contain sufficient information
  to fix the underlying problem. The reports are designed not to contain any
  potentially sensitive data to eliminate the need for review before submission.
  Included is a tool that can create microreports and perform some basic
  operations on them.


pkgId: d84600f535b10601d567f01cf741cf995868c497f47dcc18bc2aae1d82a864cd
name: scala
arch: src
version: 2.13.10
epoch: 0
release: 1.fc37
summary: Hybrid functional/object-oriented language for the JVM
url: https://www.scala-lang.org/
rpm_license: Apache-2.0 and BSD-3-Clause and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/scala-2.13.10-1.fc37.src.rpm
checksum_type: sha256
description:
  Scala is a general purpose programming language designed to express
  common programming patterns in a concise, elegant, and type-safe way.
  It smoothly integrates features of object-oriented and functional
  languages.  It is also fully interoperable with Java.

  This package contains the Scala compiler and bytecode parser.


pkgId: 6780ae14e0273d25d1f97002b8af68798016bbcd4c22679af69adad19fb3f8cc
name: scap-security-guide
arch: src
version: 0.1.64
epoch: 0
release: 1.fc37
summary: Security guidance and baselines in SCAP formats
url: https://github.com/ComplianceAsCode/content/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-29.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/scap-security-guide-0.1.64-1.fc37.src.rpm
checksum_type: sha256
description:
  The scap-security-guide project provides a guide for configuration of the
  system from the final system's security point of view. The guidance is specified
  in the Security Content Automation Protocol (SCAP) format and constitutes
  a catalog of practical hardening advice, linked to government requirements
  where applicable. The project bridges the gap between generalized policy
  requirements and specific implementation guidelines. The system
  administrator can use the oscap CLI tool from openscap-scanner package, or the
  scap-workbench GUI tool from scap-workbench package to verify that the system
  conforms to provided guideline. Refer to scap-security-guide(8) manual page for
  further information.


pkgId: 1bad68f8365d902ac4664eab7ce5f9e8c7c8317d14476e6741d8dcc9400dc236
name: schismtracker
arch: src
version: 20221020
epoch: 0
release: 1.fc37
summary: Sound module composer/player
url: http://schismtracker.org/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/schismtracker-20221020-1.fc37.src.rpm
checksum_type: sha256
description:
  Schismtracker is a module tracker for the X Window System similar to
  the DOS program `Impulse Tracker'. Schismtracker can play/modify various
  sound formats such as MOD, S3M, XM, IT, 669 and others.  The user interface
  is mostly text-based using SDL for graphical output.


pkgId: 6d9dbc5e2bc4da0fba4fc34e61a629824633d499b2dbfcd6d9620879444c65b4
name: sdl12-compat
arch: src
version: 1.2.60
epoch: 0
release: 1.fc37
summary: SDL 1.2 runtime compatibility library using SDL 2.0
url: https://github.com/libsdl-org/sdl12-compat
rpm_license: zlib and (Public Domain or MIT-0) and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sdl12-compat-1.2.60-1.fc37.src.rpm
checksum_type: sha256
description:
  Simple DirectMedia Layer (SDL) is a cross-platform multimedia library
  designed to provide fast access to the graphics frame buffer and audio device.

  This code is a compatibility layer; it provides a binary-compatible API for
  programs written against SDL 1.2, but it uses SDL 2.0 behind the scenes.

  If you are writing new code, please target SDL 2.0 directly and do not use
  this layer.


pkgId: 3be2573ee54d2f1fcb0ed9a88debf01029ef6068de9a68305dab1e371fec455b
name: sdrangel
arch: src
version: 7.8.2
epoch: 0
release: 1.fc37
summary: Software defined radio (SDR) and signal analyzer frontend to various hardware
url: https://github.com/f4exb/sdrangel
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sdrangel-7.8.2-1.fc37.src.rpm
checksum_type: sha256
description:
  SDRangel uses sample source plugins to collect I/Q samples from a hardware
  device. Then in the passband returned possibly decimated one or more channel
  Rx plugins can be used to demodulate, decode or analyze some part of this
  spectrum.

  Conversely SDRangel uses sample sink plugins to send I/Q samples to a
  hardware device. One or more channel Tx plugins can be used to produce
  modulated samples that are mixed into a transmission passband with possible
  subsequent interpolation before being sent to the device or written to file.

  More information is available on the project Wiki:
  https://github.com/f4exb/sdrangel/wiki/Quick-start


pkgId: 483b2f8c1e746fb9d5236eb9f4e0f7cfb43f116094d2359ed16585f875aed8b9
name: seamonkey
arch: src
version: 2.53.14
epoch: 0
release: 3.fc37
summary: Web browser, e-mail, news, IRC client, HTML editor
url: http://www.seamonkey-project.org
rpm_license: MPLv2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/seamonkey-2.53.14-3.fc37.src.rpm
checksum_type: sha256
description:
  SeaMonkey is an all-in-one Internet application suite (previously made
  popular by Netscape and Mozilla). It includes an Internet browser,
  advanced e-mail, newsgroup and feed client, a calendar, IRC client,
  HTML editor and a tool to inspect the DOM for web pages. It is derived
  from the application formerly known as Mozilla Application Suite.


pkgId: 6f8283eb423a4aeba6148a0d19590e3ab2e8713542d898b95315542739a308db
name: secrets
arch: src
version: 7.0
epoch: 0
release: 1.fc37
summary: Manage your passwords
url: https://gitlab.gnome.org/World/secrets
rpm_license: GPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/secrets-7.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Secrets is a password manager which integrates perfectly with the GNOME
  desktop and provides an easy and uncluttered interface for the management of
  password databases.

  Features:
    * Create or import KeePass safes
    * Assign a color and additional attributes to entries
    * Add attachments to your encrypted database
    * Generate cryptographically strong passwords
    * Change the password or keyfile of your database
    * Quickly search your favorite entries
    * Automatic database lock during inactivity
    * Adaptive interface
    * Support for two-factor authentication


pkgId: 569cb83a7e7ade440a6b80f39e5641983837638d0dc201c666c2fa69f21ef7b4
name: selinux-policy
arch: src
version: 37.14
epoch: 0
release: 1.fc37
summary: SELinux policy configuration
url: https://github.com/fedora-selinux/selinux-policy
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-23.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/selinux-policy-37.14-1.fc37.src.rpm
checksum_type: sha256
description:
  SELinux core policy package.
  Originally based off of reference policy,
  the policy has been adjusted to provide support for Fedora.


pkgId: bb0dcf751e2eaf0f893c93501f0c6e3b0a773121e9d9cc729781a01bc8742c33
name: sendmail
arch: src
version: 8.17.1
epoch: 0
release: 7.fc37
summary: A widely used Mail Transport Agent (MTA)
url: http://www.sendmail.org/
rpm_license: Sendmail
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sendmail-8.17.1-7.fc37.src.rpm
checksum_type: sha256
description:
  The Sendmail program is a very widely used Mail Transport Agent (MTA).
  MTAs send mail from one machine to another. Sendmail is not a client
  program, which you use to read your email. Sendmail is a
  behind-the-scenes program which actually moves your email over
  networks or the Internet to where you want it to go.

  If you ever need to reconfigure Sendmail, you will also need to have
  the sendmail-cf package installed. If you need documentation on
  Sendmail, you can install the sendmail-doc package.


pkgId: 05cdfc4e8bc9b5eaf366a54c8813a0eda12f09ba565672be0152a3f7619cedf5
name: sfnt2woff-zopfli
arch: src
version: 1.3.1
epoch: 0
release: 2.fc37
summary: Create WOFF files with Zopfli compression
url: https://github.com/bramstein/sfnt2woff-zopfli
rpm_license: MPL-1.0 OR GPL-2.0-or-later OR LGPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sfnt2woff-zopfli-1.3.1-2.fc37.src.rpm
checksum_type: sha256
description:
  This is a modified version of the sfnt2woff utility that uses Zopfli as a
  compression algorithm instead of zlib. This results in compression gains of —
  on average — 5-8% compared to regular WOFF files. Zopfli generates compressed
  output that is compatible with regular zlib compression so the resulting WOFF
  files can be used everywhere.

  A corresponding version of the woff2sfnt utility is also provided.


pkgId: 9a6094da7374078ed12c55b945877042b51b758ca857dd597974496b15fff071
name: shaderc
arch: src
version: 2022.2
epoch: 0
release: 3.fc37
summary: A collection of tools, libraries, and tests for Vulkan shader compilation
url: https://github.com/google/shaderc
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/shaderc-2022.2-3.fc37.src.rpm
checksum_type: sha256
description:
  A collection of tools, libraries and tests for shader compilation.

  Shaderc aims to to provide:
   - a command line compiler with GCC- and Clang-like usage, for better
     integration with build systems
   - an API where functionality can be added without breaking existing clients
   - an API supporting standard concurrency patterns across multiple
     operating systems
   - increased functionality such as file #include support


pkgId: a3ea424192f13c7c13cd803a2771cb3d9479b76cfc4e67c146a5eae136732992
name: shadow-utils
arch: src
version: 4.12.3
epoch: 2
release: 3.fc37
summary: Utilities for managing accounts and shadow password files
url: https://github.com/shadow-maint/shadow
rpm_license: BSD and GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/shadow-utils-4.12.3-3.fc37.src.rpm
checksum_type: sha256
description:
  The shadow-utils package includes the necessary programs for
  converting UNIX password files to the shadow password format, plus
  programs for managing user and group accounts. The pwconv command
  converts passwords to the shadow password format. The pwunconv command
  unconverts shadow passwords and generates a passwd file (a standard
  UNIX password file). The pwck command checks the integrity of password
  and shadow files. The lastlog command prints out the last login times
  for all users. The useradd, userdel, and usermod commands are used for
  managing user accounts. The groupadd, groupdel, and groupmod commands
  are used for managing group accounts.


pkgId: d371a3f250db604d0ef9f83105ef6fc49f88c4ba4fc55cde5ccefdf0ce33b256
name: shairplay
arch: src
version: 0.9.0
epoch: 0
release: 21.20180824git096b61a.fc37
summary: Apple AirPlay and RAOP protocol server
url: https://github.com/juhovh/shairplay/
rpm_license: MIT and BSD and LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/shairplay-0.9.0-21.20180824git096b61a.fc37.src.rpm
checksum_type: sha256
description:
  Free portable AirPlay server implementation similar to ShairPort. Currently only
  AirPort Express emulation is supported.


pkgId: b6a8105c1061cea2848359ea8ee010ec7f225381466da9bda618af7ba89902c4
name: siril
arch: src
version: 1.0.6
epoch: 0
release: 1.fc37
summary: Astronomical image processing software
url: https://siril.org
rpm_license: GPLv3+ and Boost
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/siril-1.0.6-1.fc37.src.rpm
checksum_type: sha256
description:
  Siril is an image processing tool specially tailored for noise reduction and
  improving the signal/noise ratio of an image from multiple captures, as
  required in astronomy. Siril can align automatically or manually, stack and
  enhance pictures from various file formats, even images sequences (movies and
  SER files)


pkgId: d258a4a5b99c20edc8a2f7d5b41db84b9a7b884de843869eb8b42096dc57ab72
name: skopeo
arch: src
version: 1.10.0
epoch: 1
release: 3.fc37
summary: Inspect container images and repositories on registries
url: https://github.com/containers/skopeo
rpm_license: ASL 2.0 and BSD and ISC and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/skopeo-1.10.0-3.fc37.src.rpm
checksum_type: sha256
description:
  Command line utility to inspect images and repositories directly on Docker
  registries without the need to pull them


pkgId: 23acc115f360a52e12ffa46f2be10ab24deb90d87e3161e6b8da111104471f76
name: skrooge
arch: src
version: 2.28.0
epoch: 0
release: 1.fc37
summary: Personal finances manager
url: http://skrooge.org
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/skrooge-2.28.0-1.fc37.src.rpm
checksum_type: sha256
description:
  skrooge is a personal finances manager,
  aiming at being simple and intuitive.
  It allows you to keep track of your expenses and incomes,
  categorize them, and build reports of them.


pkgId: d87f30b2fd8029957c3a4fb9447cb738c5c15fff8205cec65b719d4a005ea9d4
name: snakemake
arch: src
version: 7.18.0
epoch: 0
release: 1.fc37
summary: Workflow management system to create reproducible and scalable data analyses
url: https://snakemake.readthedocs.io/en/stable/index.html
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/snakemake-7.18.0-1.fc37.src.rpm
checksum_type: sha256
description:
  The Snakemake workflow management system is a tool to create reproducible and
  scalable data analyses. Workflows are described via a human readable, Python
  based language. They can be seamlessly scaled to server, cluster, grid and
  cloud environments, without the need to modify the workflow definition.
  Finally, Snakemake workflows can entail a description of required software,
  which will be automatically deployed to any execution environment.


pkgId: 80e6c4f7c388128d4aadf91b75d853eb53f756da1181e3f536415abe57f6f4dd
name: solaar
arch: src
version: 1.1.7
epoch: 0
release: 2.fc37
summary: Device manager for a wide range of Logitech devices
url: https://github.com/pwr/Solaar
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/solaar-1.1.7-2.fc37.src.rpm
checksum_type: sha256
description:
  Solaar is a device manager for Logitech's Unifying Receiver peripherals. It is
  able to pair/unpair devices to the receiver and, for most devices, read battery
  status.

  gtk3 is recommended.  Without it, you can run solaar commands to view the
  configuration of the devices and pair/unpair peripherals but you cannot use the
  graphical interface.


pkgId: e623f79bf03b7307e77b14d5acb5c5a0f8014366aa1135792e43259c211a9f20
name: soundkonverter
arch: src
version: 3.0.1
epoch: 0
release: 14.fc37
summary: Audio file converter, CD ripper and Replay Gain tool
url: http://kde-apps.org/content/show.php?content=29024
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/soundkonverter-3.0.1-14.fc37.src.rpm
checksum_type: sha256
description:
  SoundKonverter is a front-end to various audio converters.

  The key features are:
    * Audio conversion
    * Replay Gain calculation
    * CD ripping


pkgId: 0c1f480837c024dbcda172ba221937cb38bd18c18afe6c42e43b6294764a6df2
name: soundmodem
arch: src
version: 0.20
epoch: 0
release: 27.fc37
summary: Soundcard Packet Radio Modem
url: http://gna.org/projects/soundmodem
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/soundmodem-0.20-27.fc37.src.rpm
checksum_type: sha256
description:
  This package contains the driver and the diagnostic utility for
  userspace SoundModem. It allows you to use soundcards
  as Amateur Packet Radio modems.


pkgId: 23daf6512ebca76bb26e4935a068b000e4f18d00a920c067565bc5c315a44bb1
name: source-highlight
arch: src
version: 3.1.9
epoch: 0
release: 15.fc37
summary: Produces a document with syntax highlighting
url: http://www.gnu.org/software/src-highlite/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/source-highlight-3.1.9-15.fc37.src.rpm
checksum_type: sha256
description:
  This program, given a source file, produces a document with syntax
  highlighting. At the moment this package can handle:
  Java, Javascript, C/C++, Prolog, Perl, Php3, Python, Flex, ChangeLog, Ruby,
  Lua, Caml, Sml and Log as source languages, and HTML, XHTML and ANSI color
  escape sequences as output format.


pkgId: 04644e58fa02e60492a662d9a3c529c2ae1770d977103d06511f3afd342575fe
name: sourcextractor++
arch: src
version: 0.19
epoch: 0
release: 1.fc37
url: https://github.com/astrorama/sourcextractorplusplus
rpm_license: LGPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sourcextractor++-0.19-1.fc37.src.rpm
checksum_type: sha256
summary:
  A program that extracts a catalog of sources from astronomical images, and the successor of SExtractor

description:
  sourcextractor++ is a program that extracts a catalog of sources from
  astronomical images. It is the successor to the original SExtractor
  package.


pkgId: a30763da4eeb2f115f4f9371f48aa4a17e163985ae5b947cccb49bd897de0cfd
name: speech-dispatcher
arch: src
version: 0.11.4
epoch: 0
release: 1.fc37
summary: To provide a high-level device independent layer for speech synthesis
url: http://devel.freebsoft.org/speechd
rpm_license: GPLv2+ and LGPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/speech-dispatcher-0.11.4-1.fc37.src.rpm
checksum_type: sha256
description:
  * Common interface to different TTS engines
  * Handling concurrent synthesis requests – requests may come
    asynchronously from multiple sources within an application
    and/or from more different applications.
  * Subsequent serialization, resolution of conflicts and
    priorities of incoming requests
  * Context switching – state is maintained for each client
    connection independently, event for connections from
    within one application.
  * High-level client interfaces for popular programming languages
  * Common sound output handling – audio playback is handled by
    Speech Dispatcher rather than the TTS engine, since most engines
    have limited sound output capabilities.


pkgId: 250ece45c736ada27b98ba3aa88bbe0605bb409ceaf6ca15eb59de23ed267d6a
name: spice
arch: src
version: 0.15.1
epoch: 0
release: 1.fc37
summary: Implements the SPICE protocol
url: http://www.spice-space.org/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/spice-0.15.1-1.fc37.src.rpm
checksum_type: sha256
description:
  The Simple Protocol for Independent Computing Environments (SPICE) is
  a remote display system built for virtual environments which allows
  you to view a computing 'desktop' environment not only on the machine
  where it is running, but from anywhere on the Internet and from a wide
  variety of machine architectures.


pkgId: aadc2199e7504eb8e58e22ef06a719c59d2eb060ec3c43660b71618e5a2c9f21
name: sqlite
arch: src
version: 3.40.0
epoch: 0
release: 1.fc37
summary: Library that implements an embeddable SQL database engine
url: http://www.sqlite.org/
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sqlite-3.40.0-1.fc37.src.rpm
checksum_type: sha256
description:
  SQLite is a C library that implements an SQL database engine. A large
  subset of SQL92 is supported. A complete database is stored in a
  single disk file. The API is designed for convenience and ease of use.
  Applications that link against SQLite can enjoy the power and
  flexibility of an SQL database without the administrative hassles of
  supporting a separate database server.  Version 2 and version 3 binaries
  are named to permit each to be installed on a single host


pkgId: f8d28b0cffb98b7f94dfb27bad60bbbd32c8fad1ab4b76850d68ca237372232e
name: srm-ifce
arch: src
version: 1.24.5
epoch: 0
release: 1.fc37
summary: SRM client side library
url: https://dmc-docs.web.cern.ch/dmc-docs/srm-ifce.html
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/srm-ifce-1.24.5-1.fc37.src.rpm
checksum_type: sha256
description:
  srm-ifce is a client side implementation of the SRMv2 specification
  for GFAL1/2 and FTS. SRM means Storage Resource Manager Interface, it is a
  specification of a SOAP interface providing a generic way to manage
  distributed storage systems.


pkgId: 499da48c10086a6bb3726f3080b787af6d0488032df605c826058cae426c1f6f
name: srt
arch: src
version: 1.5.1
epoch: 0
release: 1.fc37
summary: Secure Reliable Transport protocol tools
url: https://www.srtalliance.org
rpm_license: MPLv2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/srt-1.5.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Secure Reliable Transport (SRT) is an open source transport technology that
  optimizes streaming performance across unpredictable networks, such as
  the Internet.


pkgId: dc42ce1e51d4e7d40bf32d86fea28032468c1229e843a351160b17378a4e3ce2
name: sssd
arch: src
version: 2.8.1
epoch: 0
release: 1.fc37
summary: System Security Services Daemon
url: https://github.com/SSSD/sssd/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sssd-2.8.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Provides a set of daemons to manage access to remote directories and
  authentication mechanisms. It provides an NSS and PAM interface toward
  the system and a pluggable back end system to connect to multiple different
  account sources. It is also the basis to provide client auditing and policy
  services for projects like FreeIPA.

  The sssd subpackage is a meta-package that contains the daemon as well as all
  the existing back ends.


pkgId: bf980bdc4a90d217dfe98355b4b6b46309fda4cd9b82723ed246ffa58aacff2a
name: starcal
arch: src
version: 3.1.13
epoch: 0
release: 1.fc37
summary: A full-featured international calendar written in Python
url: http://ilius.github.io/starcal/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/starcal-3.1.13-1.fc37.src.rpm
checksum_type: sha256
description:
  StarCalendar is a full-featured international calendar written in Python,
  that supports Jalai(Iranian), Hijri(Islamic), and Indian National calendars,
  as well as common English(Gregorian) calendar


pkgId: f2c70f794dc92ec21c778c11a8ec3bf8f038d5658ce23c82890bf43943105d12
name: stellarium
arch: src
version: 1.1
epoch: 0
release: 1.fc37
summary: Photo-realistic nightsky renderer
url: http://www.stellarium.org
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/stellarium-1.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Stellarium is a real-time 3D photo-realistic nightsky renderer. It can
  generate images of the sky as seen through the Earth's atmosphere with
  more than one hundred thousand stars from the Hipparcos Catalogue,
  constellations, planets, major satellites and nebulas.


pkgId: fff8bec61279a6889e3075914ba3158edfc85b0aea8c9ab9d2787ee97134fa18
name: stratis-cli
arch: src
version: 3.3.0
epoch: 0
release: 1.fc37
summary: Command-line tool for interacting with the Stratis daemon
url: https://github.com/stratis-storage/stratis-cli
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/stratis-cli-3.3.0-1.fc37.src.rpm
checksum_type: sha256
description:
  stratis provides a command-line interface (CLI) for
  interacting with the Stratis daemon, stratisd. stratis
  interacts with stratisd via D-Bus.


pkgId: f6433cb2b69b70974066501a86a3d368d8741d7a74b92a788ecdd33a9225311e
name: strawberry
arch: src
version: 1.0.10
epoch: 0
release: 1.fc37
summary: Audio player and music collection organizer
url: https://www.strawberrymusicplayer.org/
rpm_license: GPLv2 and GPLv3+ and LGPLv2 and ASL 2.0 and MIT and Boost
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/strawberry-1.0.10-1.fc37.src.rpm
checksum_type: sha256
description:
  Strawberry is a audio player and music collection organizer.
  It is a fork of Clementine. The name is inspired by the band Strawbs.

  Features:
    * Play and organize music
    * Supports WAV, FLAC, WavPack, DSF, DSDIFF, Ogg Vorbis, Speex, MPC,
      TrueAudio, AIFF, MP4, MP3 and ASF
    * Audio CD playback
    * Native desktop notifications
    * Playlists in multiple formats
    * Advanced output and device options with support for bit perfect playback
      on Linux
    * Edit tags on music files
    * Fetch tags from MusicBrainz
    * Album cover art from Last.fm, Musicbrainz and Discogs
    * Song lyrics from AudD and API Seeds
    * Support for multiple backends
    * Audio analyzer
    * Equalizer
    * Transfer music to iPod, iPhone, MTP or mass-storage USB player
    * Integrated Tidal support
    * Scrobbler with support for Last.fm, Libre.fm and ListenBrainz


pkgId: ccca536686e667788d92ebcfe42df631403f06097681eaab53518273e7469f6e
name: strongswan
arch: src
version: 5.9.8
epoch: 0
release: 1.fc37
summary: An OpenSource IPsec-based VPN and TNC solution
url: http://www.strongswan.org/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/strongswan-5.9.8-1.fc37.src.rpm
checksum_type: sha256
description:
  The strongSwan IPsec implementation supports both the IKEv1 and IKEv2 key
  exchange protocols in conjunction with the native NETKEY IPsec stack of the
  Linux kernel.


pkgId: 8965c774a0f68d2621b9081ae3b07b590f569143d13b025b57f8a2ba9a731625
name: stubby
arch: src
version: 0.4.2
epoch: 0
release: 2.fc37
summary: Application that act as a local DNS Privacy stub resolver
url: https://github.com/getdnsapi/stubby
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/stubby-0.4.2-2.fc37.src.rpm
checksum_type: sha256
description:
  Stubby is a local DNS Privacy stub resolver (using DNS-over-TLS).
  Stubby encrypts DNS queries sent from a client machine to a
  DNS Privacy resolver increasing end user privacy.


pkgId: aa01dcb5ff447c4a8de74d333f7e72bc98c788934892b6e9661eaf64c716f23b
name: subversion
arch: src
version: 1.14.2
epoch: 0
release: 8.fc37
summary: A Modern Concurrent Version Control System
url: https://subversion.apache.org/
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/subversion-1.14.2-8.fc37.src.rpm
checksum_type: sha256
description:
  Subversion is a concurrent version control system which enables one
  or more users to collaborate in developing and maintaining a
  hierarchy of files and directories while keeping a history of all
  changes.  Subversion only stores the differences between versions,
  instead of every complete file.  Subversion is intended to be a
  compelling replacement for CVS.


pkgId: 98f6b6964fcdce9f28651da63bbba4a45ebafe61b5aef60fea13d4a86709d95b
name: supertuxkart
arch: src
version: 1.4
epoch: 0
release: 2.fc37
summary: Kids 3D go-kart racing game featuring Tux
url: https://supertuxkart.net/Main_Page
rpm_license: GPLv2+ and GPLv3 and CC-BY-SA and OFL and ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/supertuxkart-1.4-2.fc37.src.rpm
checksum_type: sha256
description:
  3D go-kart racing game for kids with several famous OpenSource mascots
  participating. Race as Tux against 3 computer players in many different fun
  race courses (Standard race track, Dessert, Mathclass, etc). Full information
  on how to add your own race courses is included. During the race you can pick
  up powerups such as: (homing) missiles, magnets and portable zippers.


pkgId: e7a25d38d77d0f444143c8896cee5222ab740ebc5b4a49bad573ddf4d5929a49
name: sway
arch: src
version: 1.7
epoch: 0
release: 4.fc37
summary: i3-compatible window manager for Wayland
url: https://github.com/swaywm/sway
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sway-1.7-4.fc37.src.rpm
checksum_type: sha256
description:
  Sway is a tiling window manager supporting Wayland compositor protocol and
  i3-compatible configuration.


pkgId: 8762fbd06a9a0b19462abb843047475464a80fdafbd6d84f76ddc49377f63c8c
name: swift-lang
arch: src
version: 5.7.1
epoch: 0
release: 1.fc37
summary: The Swift programming language
url: https://www.swift.org
rpm_license: Apache 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/swift-lang-5.7.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Swift is a general-purpose programming language built using
  a modern approach to safety, performance, and software design
  patterns.

  The goal of the Swift project is to create the best available
  language for uses ranging from systems programming, to mobile
  and desktop apps, scaling up to cloud services. Most
  importantly, Swift is designed to make writing and maintaining
  correct programs easier for the developer.


pkgId: ba293f11de5c6fef0c68594a56e6fac1dc13ae07a928029db9eff1d3a813f599
name: switchdesk
arch: src
version: 5.0.1
epoch: 0
release: 14.fc37
summary: A desktop environment switcher
url: http://than.fedorapeople.org/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/switchdesk-5.0.1-14.fc37.src.rpm
checksum_type: sha256
description:
  The Desktop Switcher is a tool which enables users to easily switch
  between various desktop environments that they have installed.

  Support for different environments on different computers is available, as
  well as support for setting a global default environment.

  Install switchdesk if you need a tool for switching between desktop
  environments.


pkgId: 71af639cee4ed7d84abdb54fac2e5265207608525048234f747ea7ac784439c1
name: syncthing
arch: src
version: 1.22.0
epoch: 0
release: 1.fc37
summary: Continuous File Synchronization
url: https://syncthing.net
rpm_license: MPLv2.0 and MIT and OFL and CC-BY and BSD and ASL 2.0 and ISC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/syncthing-1.22.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Syncthing replaces other file synchronization services with something
  open, trustworthy and decentralized. Your data is your data alone and
  you deserve to choose where it is stored, if it is shared with some
  third party and how it's transmitted over the Internet. Using syncthing,
  that control is returned to you.

  This package contains the syncthing client binary and systemd services.


pkgId: 1febf2c34f499224842f8f46f543ded3a57d3938997d291c385a41eb9a143adc
name: sysmontask
arch: src
version: 1.3.9
epoch: 0
release: 8.fc37
summary: Linux system monitor with the compactness and usefulness of WTM
url: https://github.com/KrispyCamel4u/SysMonTask
rpm_license: BSD and LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-40.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sysmontask-1.3.9-8.fc37.src.rpm
checksum_type: sha256
description:
  Linux system monitor with the compactness and usefulness of Windows Task
  Manager to allow higher control and monitoring.


pkgId: b5649baed898ae5a7c6602dd599a5d9501b8507b4cb904a644d030bc7dc8e727
name: sysrepo
arch: src
version: 2.2.12
epoch: 0
release: 1.fc37
summary: YANG-based configuration and operational data store
url: https://github.com/sysrepo/sysrepo
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sysrepo-2.2.12-1.fc37.src.rpm
checksum_type: sha256
description:
  YANG-based configuration and operational data store - runtime Applications can
  use sysrepo to store their configuration modeled by provided YANG model
  instead of using e.g. flat configuration files. Sysrepo will ensure data
  consistency of the data stored in the data store and enforce data constraints
  defined by YANG model.

  The library is implemented in C and provides an API for other software
  to use for accessing sysrepo datastore.


pkgId: 0a57a95336dee163f6b93234bb83a06f8925da620962652be9fb78e12771d05e
name: sysstat
arch: src
version: 12.6.0
epoch: 0
release: 4.fc37
summary: Collection of performance monitoring tools for Linux
url: http://sebastien.godard.pagesperso-orange.fr/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/sysstat-12.6.0-4.fc37.src.rpm
checksum_type: sha256
description:
  The sysstat package contains the sar, sadf, mpstat, iostat, tapestat,
  pidstat, cifsiostat and sa tools for Linux.
  The sar command collects and reports system activity information.
  The information collected by sar can be saved in a file in a binary
  format for future inspection. The statistics reported by sar concern
  I/O transfer rates, paging activity, process-related activities,
  interrupts, network activity, memory and swap space utilization, CPU
  utilization, kernel activities and TTY statistics, among others. Both
  UP and SMP machines are fully supported.
  The sadf command may  be used to display data collected by sar in
  various formats (CSV, PCP, XML, etc.).
  The iostat command reports CPU utilization and I/O statistics for disks.
  The tapestat command reports statistics for tapes connected to the system.
  The mpstat command reports global and per-processor statistics.
  The pidstat command reports statistics for Linux tasks (processes).
  The cifsiostat command reports I/O statistics for CIFS file systems.


pkgId: 722d08e9102752a915179dbcf0a61e8a9b301a492dd4010f8da95daaf04f0fd1
name: systemd
arch: src
version: 251.8
epoch: 0
release: 586.fc37
summary: System and Service Manager
url: https://www.freedesktop.org/wiki/Software/systemd
rpm_license: LGPLv2+ and MIT and GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/systemd-251.8-586.fc37.src.rpm
checksum_type: sha256
description:
  systemd is a system and service manager that runs as PID 1 and starts the rest
  of the system. It provides aggressive parallelization capabilities, uses socket
  and D-Bus activation for starting services, offers on-demand starting of
  daemons, keeps track of processes using Linux control groups, maintains mount
  and automount points, and implements an elaborate transactional dependency-based
  service control logic. systemd supports SysV and LSB init scripts and works as a
  replacement for sysvinit. Other parts of this package are a logging daemon,
  utilities to control basic system configuration like the hostname, date, locale,
  maintain a list of logged-in users, system accounts, runtime directories and
  settings, and a logging daemons.

  This package was built from the 251.8-stable branch of systemd.


pkgId: ac85f72ac195c250e17a2786048bba3707912f71a4835adfde2f4c07be8813d4
name: systemtap
arch: src
version: 4.8
epoch: 0
release: 1.fc37
summary: Programmable system-wide instrumentation system
url: http://sourceware.org/systemtap/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/s/systemtap-4.8-1.fc37.src.rpm
checksum_type: sha256
description:
  SystemTap is an instrumentation system for systems running Linux.
  Developers can write instrumentation scripts to collect data on
  the operation of the system.  The base systemtap package contains/requires
  the components needed to locally develop and execute systemtap scripts.


pkgId: 3009a5eb5641e5dd10fbe09d2aa1fa1a1a9422cb4927c8ebb8b38c1d3fd3ca1a
name: tacacs
arch: src
version: F4.0.4.28.7fb~20220905g25fd8f0
epoch: 0
release: 1.fc37
summary: Daemon to run AAA via TACACS+ Protocol via IPv4 and IPv6
url: https://github.com/facebook/tac_plus
rpm_license: MIT and GPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tacacs-F4.0.4.28.7fb~20220905g25fd8f0-1.fc37.src.rpm
checksum_type: sha256
description:
  Tacacs+ (tac_plus) is a C daemon that authenticates requests via the Tacacs+
  Protocol and logs accounting information.

  This is a fork of Cisco + Shruberry's Tacacs+ daemons
  (http://www.shrubbery.net/tac_plus/).


pkgId: d96631d4bb2a78bf5fda16e3f5e4468f9f11f63e6ad6b41a97159e63ff963b64
name: tar
arch: src
version: 1.34
epoch: 2
release: 5.fc37
summary: GNU file archiving program
url: https://www.gnu.org/software/tar/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tar-1.34-5.fc37.src.rpm
checksum_type: sha256
description:
  The GNU tar program saves many files together in one archive and can
  restore individual files (or all of the files) from that archive. Tar
  can also be used to add supplemental files to an archive and to update
  or list files in the archive. Tar includes multivolume support,
  automatic archive compression/decompression, the ability to perform
  remote archives, and the ability to perform incremental and full
  backups.

  If you want to use tar for remote backups, you also need to install
  the rmt package on the remote box.


pkgId: 1e019af47c00164a79e3ea921ce84dc81dbea4299cea0965d905cefc28f4ba7a
name: task
arch: src
version: 2.6.2
epoch: 0
release: 3.fc37
summary: Taskwarrior - a command-line TODO list manager
url: https://taskwarrior.org
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/task-2.6.2-3.fc37.src.rpm
checksum_type: sha256
description:
  Taskwarrior is a command-line TODO list manager. It is flexible, fast,
  efficient, unobtrusive, does its job then gets out of your way.

  Taskwarrior scales to fit your workflow. Use it as a simple app that captures
  tasks, shows you the list, and removes tasks from that list. Leverage its
  capabilities though, and it becomes a sophisticated data query tool that can
  help you stay organized, and get through your work.


pkgId: 14d0fda96cdb15c76d1cd636647e2582f78081d128e388c8e72d5869f9495bee
name: tcllib
arch: src
version: 1.21
epoch: 0
release: 1.fc37
summary: The standard Tcl library
url: https://core.tcl-lang.org/tcllib/doc/trunk/embedded/index.md
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tcllib-1.21-1.fc37.src.rpm
checksum_type: sha256
description:
  Tcllib, the Tcl Standard Library is a collection of Tcl packages
  that provide utility functions useful to a large collection of Tcl
  programmers.


pkgId: 999f70055976637076b003210c25b1252f8e862405c21997fac60b6fb6d42c6f
name: testssl
arch: src
version: 3.0.8
epoch: 0
release: 1.fc37
summary: Testing TLS/SSL encryption
url: https://testssl.sh/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/testssl-3.0.8-1.fc37.src.rpm
checksum_type: sha256
description:
  testssl.sh is a free command line tool which checks a server's service on any
  port for the support of TLS/SSL ciphers, protocols as well as recent
  cryptographic flaws and more.


pkgId: 87c13e62c62106efced306c7844166acd1515c5709679b7beac955de16719d30
name: thonny
arch: src
version: 4.0.1
epoch: 0
release: 1.fc37
summary: Python IDE for beginners
url: https://thonny.org
rpm_license: MIT AND EPL-1.0 AND Unlicense
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/thonny-4.0.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Thonny is a simple Python IDE with features useful for learning programming.
  It comes with a debugger which is able to visualize all the conceptual steps
  taken to run a Python program (executing statements, evaluating expressions,
  maintaining the call stack). There is a GUI for installing 3rd party packages
  and special mode for learning about references.


pkgId: 2d83f3fe9c740e73b330d74e6f6624b23559fcc25e64bfafc6131a4190d491de
name: tiled
arch: src
version: 1.9.2
epoch: 0
release: 2.fc37
summary: Tiled Map Editor
url: http://www.mapeditor.org
rpm_license: GPLv2+ and BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tiled-1.9.2-2.fc37.src.rpm
checksum_type: sha256
description:
  Tiled is a general purpose tile map editor. It is built to be easy to use,
  yet flexible enough to work with varying game engines, whether your game
  is an RPG, platformer or Breakout clone. Tiled is free software and written
  in C++, using the Qt application framework.

  This package contains the tiled application and tmxviewer, a simple application
  to view Tiled maps.


pkgId: 24381a2e6ee4a56f465cd76f255060178eca73f71994fc78488db9ae593a804f
name: tinygo
arch: src
version: 0.26.0
epoch: 0
release: 3.fc37
summary: Go compiler for small places
url: https://github.com/tinygo-org/tinygo
rpm_license: BSD and APSL 2.0 and ASL 2.0 and CC0 and ISC and MIT and (NCSA or MIT) and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tinygo-0.26.0-3.fc37.src.rpm
checksum_type: sha256
description:
  Go compiler for small places. Microcontrollers, WebAssembly, and command-line
  tools. Based on LLVM.


pkgId: 0327915676653d2c0e289f43a9861c4ae2eb5bcd9d0b54c0480118216c3dce4e
name: tio
arch: src
version: 2.3
epoch: 0
release: 1.fc37
summary: Simple TTY terminal I/O application
url: https://tio.github.io/
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-32.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tio-2.3-1.fc37.src.rpm
checksum_type: sha256
description:
  Tio is a simple TTY terminal application which features a straightforward
  commandline interface to easily connect to TTY devices for basic input/output.


pkgId: 6e212206e2729c77d3ef1e9e0be048c593f03bb40edefbdd5bb9319b883fe230
name: tlf
arch: src
version: 1.4.1
epoch: 0
release: 10.fc37
summary: Ham radio contest logger
url: https://github.com/Tlf/tlf
rpm_license: GPLv2+ and GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tlf-1.4.1-10.fc37.src.rpm
checksum_type: sha256
description:
  Tlf is a console (ncurses) mode general purpose CW/VOICE keyer,
  logging and contest program for hamradio. It supports the CQWW,
  the WPX, the ARRL-DX , the ARRL-FD, the PACC and the EU SPRINT
  contests (single operator) as well as a LOT MORE basic contests,
  general QSO and DXpedition mode.


pkgId: 314a0be4bf2e7c4da23d1a3746db56d4462a40868818d0ad5009346ffdb38091
name: tmt
arch: src
version: 1.19.0
epoch: 0
release: 1.fc37
summary: Test Management Tool
url: https://github.com/teemtee/tmt
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tmt-1.19.0-1.fc37.src.rpm
checksum_type: sha256
description:
  The tmt Python module and command line tool implement the test
  metadata specification (L1 and L2) and allows easy test execution.
  This package contains the command line tool.


pkgId: ca982372b996ad46d83100a456df55c8774fc156f500e111f5639774e7e917e4
name: tomcat
arch: src
version: 9.0.68
epoch: 1
release: 1.fc37
summary: Apache Servlet/JSP Engine, RI for Servlet 4.0/JSP 2.3 API
url: http://tomcat.apache.org/
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tomcat-9.0.68-1.fc37.src.rpm
checksum_type: sha256
description:
  Tomcat is the servlet container that is used in the official Reference
  Implementation for the Java Servlet and JavaServer Pages technologies.
  The Java Servlet and JavaServer Pages specifications are developed by
  Sun under the Java Community Process.

  Tomcat is developed in an open and participatory environment and
  released under the Apache Software License version 2.0. Tomcat is intended
  to be a collaboration of the best-of-breed developers from around the world.


pkgId: 975d38aa5838117e53853e800b4febce511d2206eed621200b94442b32866a9d
name: tor
arch: src
version: 0.4.7.11
epoch: 0
release: 1.fc37
summary: Anonymizing overlay network for TCP
url: https://www.torproject.org
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tor-0.4.7.11-1.fc37.src.rpm
checksum_type: sha256
description:
  The Tor network is a group of volunteer-operated servers that allows people to
  improve their privacy and security on the Internet. Tor's users employ this
  network by connecting through a series of virtual tunnels rather than making a
  direct connection, thus allowing both organizations and individuals to share
  information over public networks without compromising their privacy. Along the
  same line, Tor is an effective censorship circumvention tool, allowing its
  users to reach otherwise blocked destinations or content. Tor can also be used
  as a building block for software developers to create new communication tools
  with built-in privacy features.

  This package contains the Tor software that can act as either a server on the
  Tor network, or as a client to connect to the Tor network.


pkgId: 389c1401673d0c0d84cc590795433c63cd70804c2723f9667c200902ac0bfbbf
name: tortoisehg
arch: src
version: 6.2.3
epoch: 0
release: 1.fc37
summary: Mercurial GUI command line tool thg
url: https://foss.heptapod.net/mercurial/tortoisehg/thg
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tortoisehg-6.2.3-1.fc37.src.rpm
checksum_type: sha256
description:
  This package contains the thg command line tool, which provides a graphical
  user interface to the Mercurial distributed revision control system.


pkgId: e52ac7609f3037e5cac2ee81c49baf89ee890680050bedb40c6a342ebe13f86b
name: toxcore
arch: src
version: 0.2.18
epoch: 0
release: 1.fc37
summary: Peer to peer instant messenger
url: https://github.com/TokTok/c-toxcore
rpm_license: GPLv3+ and BSD and ISC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/toxcore-0.2.18-1.fc37.src.rpm
checksum_type: sha256
description:
  Tox is a peer to peer (serverless) instant messenger aimed at making
  security and privacy easy to obtain for regular users. It uses NaCl
  for its encryption and authentication.


pkgId: 452010400efbd69c3d1ac0af441747b64b2c4d9d04fe95268a640282a3c8b384
name: transmission
arch: src
version: 3.00
epoch: 0
release: 14.fc37
summary: A lightweight GTK+ BitTorrent client
url: http://www.transmissionbt.com
rpm_license: MIT and GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/transmission-3.00-14.fc37.src.rpm
checksum_type: sha256
description:
  Transmission is a free, lightweight BitTorrent client. It features a
  simple, intuitive interface on top on an efficient, cross-platform
  back-end.


pkgId: 04ec464897e54e97e45f6f08a2406bb6d29558c786dd0b0d75907367061d99c3
name: trelby
arch: src
version: 2.4.7
epoch: 0
release: 1.fc37
summary: The free, multiplatform, feature-rich screenwriting program
url: https://github.com/limburgher/trelby
rpm_license: GPLv2 and GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-20.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/trelby-2.4.7-1.fc37.src.rpm
checksum_type: sha256
description:
  Trelby is simple, fast and elegantly laid out to make
  screenwriting simple. It is infinitely configurable.


pkgId: 47654f522e993fd4c747d20d1df641c25d7bec1041d9b6abb9c54332fdf956e1
name: trellis
arch: src
version: 1.2.1
epoch: 0
release: 12.20221109git35f5aff.fc37
summary: Lattice ECP5 FPGA bitstream creation/analysis/programming tools
url: https://github.com/YosysHQ/prjtrellis
rpm_license: ISC
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/trellis-1.2.1-12.20221109git35f5aff.fc37.src.rpm
checksum_type: sha256
description:
  Project Trellis enables a fully open-source flow for ECP5 FPGAs using
  Yosys for Verilog synthesis and nextpnr for place and route. Project
  Trellis provides the device database and tools for bitstream creation.


pkgId: b72c514e241aef7e72f1b56a9c5206b0654af3d4bcfd5511c689cbf028a30804
name: trojita
arch: src
version: 0.7.0.1
epoch: 0
release: 0.15.20220904git5295175.fc37
summary: IMAP e-mail client
url: http://trojita.flaska.net
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/trojita-0.7.0.1-0.15.20220904git5295175.fc37.src.rpm
checksum_type: sha256
description:
  Trojitá is a IMAP e-mail client which:
    * Enables you to access your mail anytime, anywhere.
    * Does not slow you down. If we can improve the productivity of an e-mail
      user, we better do.
    * Respects open standards and facilitates modern technologies. We value
      the vendor-neutrality that IMAP provides and are committed to be as
      inter-operable as possible.
    * Is efficient — be it at conserving the network bandwidth, keeping memory
      use at a reasonable level or not hogging the system's CPU.
    * Can be used on many platforms. One UI is not enough for everyone, but our
      IMAP core works fine on anything from desktop computers to cell phones
      and big ERP systems.
    * Plays well with the rest of the ecosystem. We don't like reinventing wheels,
      but when the existing wheels quite don't fit the tracks, we're not afraid
      of making them work.

  This application is heavily based on Qt and uses WebKit.


pkgId: 62ad5785e2650b6d166b0b7f865607624b4298d6b6363e3371070152d4e8417f
name: trustedqsl
arch: src
version: 2.6.5
epoch: 0
release: 1.fc37
summary: Tool for digitally signing Amateur Radio QSO records
url: http://sourceforge.net/projects/trustedqsl/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/trustedqsl-2.6.5-1.fc37.src.rpm
checksum_type: sha256
description:
  The TrustedQSL applications are used for generating digitally signed
  QSO records (records of Amateur Radio contacts). This package
  contains the GUI applications tqslcert and tqsl.


pkgId: 237b3f382dca3977b5cf5565ea4dc394ccc40454a7aca81e08141e6622f39fa4
name: tucnak
arch: src
version: 4.37
epoch: 0
release: 2.fc37
summary: VHF contest logging program
url: http://tucnak.nagano.cz/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/tucnak-4.37-2.fc37.src.rpm
checksum_type: sha256
description:
  Tucnak is VHF/UHF/SHF log for hamradio contests. It supports multi
  bands, free input, networking, voice and CW keyer, WWL database and
  much more.


pkgId: f221ded8ae71585b627833bf29a67f5691f0e7b9059119fc9e15f3960715d08a
name: typescript
arch: src
version: 4.8.4
epoch: 0
release: 2.fc37
summary: A language for application scale JavaScript development
url: https://www.typescriptlang.org
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/t/typescript-4.8.4-2.fc37.src.rpm
checksum_type: sha256
description:
  TypeScript is a language for application-scale JavaScript. TypeScript adds
  optional types to JavaScript that support tools for large-scale JavaScript
  applications for any browser, for any host, on any OS. TypeScript compiles to
  readable, standards-based JavaScript.


pkgId: aaa21974dd678a326bae7c650066761ac2dc02cc04fc08b398b6361cdb8e753a
name: uberftp
arch: src
version: 2.9.1
epoch: 0
release: 1.fc37
summary: GridFTP-enabled ftp client
url: https://gridcf.org/
rpm_license: NCSA
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/u/uberftp-2.9.1-1.fc37.src.rpm
checksum_type: sha256
description:
  UberFTP is the first interactive, GridFTP-enabled ftp client.
  It supports GSI authentication, parallel data channels and
  third party transfers.


pkgId: 5e5229071dd9e322ad4405871256f922f0d715eb979b984f1f4510b0fee298e2
name: uim
arch: src
version: 1.8.9
epoch: 0
release: 1.fc37
summary: A multilingual input method library
url: https://github.com/uim/uim/
rpm_license: BSD and LGPLv2+ and (BSD or LGPLv2)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/u/uim-1.8.9-1.fc37.src.rpm
checksum_type: sha256
description:
  Uim is a multilingual input method library. Uim aims to
  provide secure and useful input methods for all
  languages. Currently, it can input to applications which
  support Gtk+'s immodule, Qt's immodule and XIM.

  This package provides the input method library, the XIM
  bridge and most of the input methods.

  For the Japanese input methods you need to install
  - uim-anthy for Anthy
  - uim-canna for Canna
  - uim-skk for SKK.


pkgId: 840506efb26892fdbdad6ed3b4a5a139c36b0dde3d51063b300e76a0a07268ea
name: unbound
arch: src
version: 1.16.3
epoch: 0
release: 3.fc37
summary: Validating, recursive, and caching DNS(SEC) resolver
url: https://nlnetlabs.nl/projects/unbound/
rpm_license: BSD-3-Clause
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/u/unbound-1.16.3-3.fc37.src.rpm
checksum_type: sha256
description:
  Unbound is a validating, recursive, and caching DNS(SEC) resolver.

  The C implementation of Unbound is developed and maintained by NLnet
  Labs. It is based on ideas and algorithms taken from a java prototype
  developed by Verisign labs, Nominet, Kirei and ep.net.

  Unbound is designed as a set of modular components, so that also
  DNSSEC (secure DNS) validation and stub-resolvers (that do not run
  as a server, but are linked into an application) are easily possible.


pkgId: 6784b20c568134cb822b9c05dc1e69eb9785f0a55957cd7a4d3d7570852e66b0
name: unpaper
arch: src
version: 7.0.0
epoch: 0
release: 4.fc37
summary: Post-processing of scanned and photocopied book pages
url: https://www.flameeyes.eu/projects/unpaper
rpm_license: GPLv2 and 0BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/u/unpaper-7.0.0-4.fc37.src.rpm
checksum_type: sha256
description:
  unpaper is a post-processing tool for scanned sheets of paper, especially for
  book pages that have been scanned from previously created photocopies. The
  main purpose is to make scanned book pages better readable on screen after
  conversion to PDF. Additionally, unpaper might be useful to enhance the
  quality of scanned pages before performing optical character recognition (OCR).

  unpaper tries to clean scanned images by removing dark edges that appeared
  through scanning or copying on areas outside the actual page content (e.g. dark
  areas between the left-hand-side and the right-hand-side of a double-sided
  book-page scan).

  The program also tries to detect misaligned centering and rotation of pages
  and will automatically straighten each page by rotating it to the correct
  angle. This process is called "deskewing".


pkgId: 8570195b04b8d0fd63a8b1b898b4bc8475ab1c798626f4362a571fbcada6c2eb
name: unrar-free
arch: src
version: 0.1.2
epoch: 0
release: 1.fc37
summary: Free software version of the non-free unrar utility
url: https://gitlab.com/bgermann/unrar-free
rpm_license: GPL-2.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/u/unrar-free-0.1.2-1.fc37.src.rpm
checksum_type: sha256
description:
  unrar-free is a free software version of the non-free unrar utility. This
  program is a simple command-line front-end to libarchive, and can list and
  extract RAR archives but also other formats supported by libarchive. It does
  not rival the non-free unrar in terms of features, but special care has been
  taken to ensure it meets most user's needs.


pkgId: 4d5c4c7f033db46f7dcd9e6d7b172518548e26dbf3c06ae05cf07b92bcbc761b
name: usbredir
arch: src
version: 0.13.0
epoch: 0
release: 1.fc37
summary: USB network redirection protocol libraries
url: https://www.spice-space.org/usbredir.html
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/u/usbredir-0.13.0-1.fc37.src.rpm
checksum_type: sha256
description:
  The usbredir libraries allow USB devices to be used on remote and/or virtual
  hosts over TCP.  The following libraries are provided:

  usbredirparser:
  A library containing the parser for the usbredir protocol

  usbredirhost:
  A library implementing the USB host side of a usbredir connection.
  All that an application wishing to implement a USB host needs to do is:
  * Provide a libusb device handle for the device
  * Provide write and read callbacks for the actual transport of usbredir data
  * Monitor for usbredir and libusb read/write events and call their handlers


pkgId: d7f257dd8b9b034b8d236d7999c805ad1697f78a57979472f041e718da495c44
name: uwsgi
arch: src
version: 2.0.21
epoch: 0
release: 2.fc37
summary: Fast, self-healing, application container server
url: https://github.com/unbit/uwsgi
rpm_license: GPLv2 with exceptions and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/u/uwsgi-2.0.21-2.fc37.src.rpm
checksum_type: sha256
description:
  uWSGI is a fast (pure C), self-healing, developer/sysadmin-friendly
  application container server.  Born as a WSGI-only server, over time it has
  evolved in a complete stack for networked/clustered web applications,
  implementing message/object passing, caching, RPC and process management.
  It uses the uwsgi (all lowercase, already included by default in the Nginx
  and Cherokee releases) protocol for all the networking/interprocess
  communications.  Can be run in preforking mode, threaded,
  asynchronous/evented and supports various form of green threads/co-routine
  (like uGreen and Fiber).  Sysadmin will love it as it can be configured via
  command line, environment variables, xml, .ini and yaml files and via LDAP.
  Being fully modular can use tons of different technology on top of the same
  core.


pkgId: 37c1442f7f50125e194253b4210a07aed976f01d8ad25077764c48272b9e80cf
name: v4l-utils
arch: src
version: 1.22.1
epoch: 0
release: 4.fc37
summary: Utilities for video4linux and DVB devices
url: http://www.linuxtv.org/downloads/v4l-utils/
rpm_license: GPLv2+ and GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/v4l-utils-1.22.1-4.fc37.src.rpm
checksum_type: sha256
description:
  v4l-utils is a collection of various video4linux (V4L) and DVB utilities. The
  main v4l-utils package contains cx18-ctl, ir-keytable, ivtv-ctl, v4l2-ctl and
  v4l2-sysfs-path.


pkgId: f8d8322e05b0407049101e554bd4f50999b79c5710dbb0f831a33715adcb7a51
name: valgrind
arch: src
version: 3.20.0
epoch: 1
release: 1.fc37
summary: Dynamic analysis tools to detect memory or thread bugs and profile
url: https://www.valgrind.org/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/valgrind-3.20.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Valgrind is an instrumentation framework for building dynamic analysis
  tools. There are Valgrind tools that can automatically detect many
  memory management and threading bugs, and profile your programs in
  detail. You can also use Valgrind to build new tools. The Valgrind
  distribution currently includes six production-quality tools: a memory
  error detector (memcheck, the default tool), two thread error
  detectors (helgrind and drd), a cache and branch-prediction profiler
  (cachegrind), a call-graph generating cache and branch-prediction
  profiler (callgrind), and a heap profiler (massif).


pkgId: 99fc32096c4221eb26c9ef13be026e9dd594d0840c3b68e36dec2183edbe5df9
name: varnish
arch: src
version: 7.1.2
epoch: 0
release: 1.fc37
summary: High-performance HTTP accelerator
url: https://www.varnish-cache.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/varnish-7.1.2-1.fc37.src.rpm
checksum_type: sha256
description:
  This is Varnish Cache, a high-performance HTTP accelerator.

  Varnish Cache stores web pages in memory so web servers don’t have to
  create the same web page over and over again. Varnish Cache serves
  pages much faster than any application server; giving the website a
  significant speed up.

  Documentation wiki and additional information about Varnish Cache is
  available on: https://www.varnish-cache.org/


pkgId: 7232e114b20d5adb3848a79d96e588d056c97b39c81b7c12af4b0efea962a61a
name: varnish-modules
arch: src
version: 0.20.0
epoch: 0
release: 4.fc37
summary: A collection of modules ("vmods") extending Varnish VCL
url: https://github.com/varnish/varnish-modules
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/varnish-modules-0.20.0-4.fc37.src.rpm
checksum_type: sha256
description:
  This is a collection of modules ("vmods") extending Varnish VCL used
  for describing HTTP request/response policies with additional
  capabilities. This collection contains the following vmods:
  bodyaccess, header, saintmode, tcp, var, vsthrottle, xkey


pkgId: 8ffd1542e83f83479a76e32e01d1e87684c6b12375c1e24596fd9e4106ea45b9
name: vcpkg
arch: src
version: 2022.11.10
epoch: 0
release: 1.fc37
summary: C++ Library Manager
url: https://github.com/microsoft/vcpkg-tool
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vcpkg-2022.11.10-1.fc37.src.rpm
checksum_type: sha256
description:
  Vcpkg is a package manager for the different C and C++ libraries.

  Vcpkg can collect usage data. The data collected by Microsoft is anonymous.

  Fedora package has telemetry disabled by default. If you want to enable
  telemetry, you should remove the /etc/profile.d/vcpkg.sh file
  or unset the VCPKG_DISABLE_METRICS environment variable.


pkgId: 428e52563e27fc5c36d5eaa38b2b02def8cb887c930b585d871f8aece8f2416a
name: vcs-diff-lint
arch: src
version: 3
epoch: 0
release: 1.fc37
summary: VCS Differential Code Analysis Tool
url: https://github.com/fedora-copr/vcs-diff-lint
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vcs-diff-lint-3-1.fc37.src.rpm
checksum_type: sha256
description:
  Analyze code, and print only reports related to a particular change.

  From within a VCS directory (only Git is supported for now) first analyze set of
  changed files against given changeset (origin/main by default) so we know what
  files need to be analyzed.  Then run code analyzers (e.g. PyLint) against the
  old code (before changes), run analyzers against the actual code (not yet pushed
  changes), perform a diff (using csdiff utility), and finally print a set of
  added (or even fixed, as opt-in) analyzers' warnings.


pkgId: 5a35397b1edb4774df8db2a58b2eaa507f2bfb234e4df4b330b5187816ce0fba
name: vdr-live
arch: src
version: 3.1.8
epoch: 0
release: 1.fc37
summary: An interactive web interface with HTML5 live stream support for VDR
url: https://github.com/MarkusEh/vdr-plugin-live
rpm_license: GPLv2+ and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vdr-live-3.1.8-1.fc37.src.rpm
checksum_type: sha256
description:
  New version with HTML5 live stream support.
  Live, the "Live Interactive VDR Environment", is a plugin providing the
  possibility to interactively control the VDR and some of it's plugins by
  a web interface.

  Unlike external utility programs that communicate with VDR and it's plugins
  by SVDRP, Live has direct access to VDR's data structures and is thus very
  fast.


pkgId: adab37137deaa392a1ccd41fa5720032f4defd735171dadea99516440b8658ca
name: vdr-skinnopacity
arch: src
version: 1.1.13
epoch: 0
release: 1.fc37
summary: A highly customizable native true color skin for the Video Disc Recorder
url: https://gitlab.com/kamel5/SkinNopacity
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vdr-skinnopacity-1.1.13-1.fc37.src.rpm
checksum_type: sha256
description:
  The VDR plugin "nOpacity" is a highly customizable native true color skin
  for the Video Disc Recorder.


pkgId: 14a24252c7ec843a3ce2015fad4b2e6acded9b5f2ec63beed84ad0b3a9d3ecf6
name: vdr-tvscraper
arch: src
version: 1.1.8
epoch: 0
release: 1.fc37
summary: Collects metadata for all available EPG events
url: https://github.com/MarkusEh/vdr-plugin-tvscraper
rpm_license: GPL-2.0-or-later AND MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vdr-tvscraper-1.1.8-1.fc37.src.rpm
checksum_type: sha256
description:
  TVScraper runs in the background and collects metadata (posters,
  banners, fanart, actor thumbs and roles, descriptions) for all
  available EPG events on selectable channels and for recordings.
  Additionally the plugin provides the collected metadata via the VDR
  service interface to other plugins which deal with EPG information.

  TVScraper uses the thetvdb.com API for collecting series metadata and
  themoviedb.org API for movies. Check the websites of both services for
  the terms of use.

  Important: To avoid unnecessary traffic, only activate these channels
  to be scrapped which are reasonable. After plugin installation all
  channels are deactivated by default, so please consider this point when
  you activate the channels you are interested in ;)

  Additionally you are invited to contribute to the used web services with
  providing missing data for your favorite movies and series.


pkgId: c70153b0f91120bada98ba4799af8fffe8f29a4a1a6acf38483e59d64b454a38
name: veusz
arch: src
version: 3.5.3
epoch: 0
release: 1.fc37
summary: GUI scientific plotting package
url: https://veusz.github.io/
rpm_license: GPLv2+ and Python
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/veusz-3.5.3-1.fc37.src.rpm
checksum_type: sha256
description:
  Veusz is a 2D and 3D scientific plotting package, designed to create
  publication-ready vector PDF and SVG output. It features GUI,
  command-line, and scripting interfaces. Graphs are constructed from
  widgets, allowing complex layouts to be designed. Veusz supports
  plotting functions, data with error bars, keys, labels, stacked plots,
  ternary plots, vector plots, contours, images, shapes and fitting
  data. 3D point, surface, volume and function plots are also supported.


pkgId: e03f363f456ef064c7fa75e9557711cf399dc81cee503fb9ae8fc02f2388a50b
name: vgrep
arch: src
version: 2.6.1
epoch: 0
release: 1.fc37
summary: User-friendly pager for grep
url: https://github.com/vrothberg/vgrep
rpm_license: GPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-32.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vgrep-2.6.1-1.fc37.src.rpm
checksum_type: sha256
description:
  vgrep is a pager for grep, git-grep, ripgrep and similar grep implementations,
  and allows for opening the indexed file locations in a user-specified editor
  such as vim or emacs. vgrep is inspired by the ancient cgvg scripts but
  extended to perform further operations such as listing statistics of files and
  directory trees or showing the context lines before and after the matches.


pkgId: d668db75da22889717f8d6cd457ca72ba55509e375a7aeb0a1cb46aff201064d
name: video-downloader
arch: src
version: 0.10.10
epoch: 0
release: 1.fc37
summary: Download videos from websites like YouTube and many others
url: https://github.com/Unrud/video-downloader
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/video-downloader-0.10.10-1.fc37.src.rpm
checksum_type: sha256
description:
  Download videos from websites with an easy-to-use interface. Provides the
  following features:

    * Convert videos to MP3
    * Supports password-protected and private videos
    * Download single videos or whole playlists
    * Automatically selects a video format based on your preferred resolution

  Based on yt-dlp.


pkgId: c032afbe8a1e08f36f0cc0a4e70a1cdca1490ec48d96d0db15bf60fd9d6e0a1e
name: vim
arch: src
version: 9.0.915
epoch: 2
release: 1.fc37
summary: The VIM editor
url: http://www.vim.org/
rpm_license: Vim and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vim-9.0.915-1.fc37.src.rpm
checksum_type: sha256
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more.


pkgId: d1b9be32073e568693b7cd1c42fcbbbfc8eeaeba1f79e554f903cf626c9c83fe
name: virt-lightning
arch: src
version: 2.2.0
epoch: 0
release: 1.fc37
summary: A pure-Python implementation of the HTTP/2 priority tree
url: https://virt-lightning.org
rpm_license: Apache-2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/virt-lightning-2.2.0-1.fc37.src.rpm
checksum_type: sha256
description:
  A CLI to start local Cloud image on libvirt!

  Virt-Lightning can quickly deploy a bunch of new VM. It also prepares the
  Ansible inventory file!

  This is handy to quickly validate a new Ansible playbook, or a role on a large
  number of environments.


pkgId: 97fbaab9c8c52532f0e451b2becfe5076f709a042b4a61c5e9be999f7e2c8329
name: virtualbox-guest-additions
arch: src
version: 7.0.4
epoch: 0
release: 1.fc37
summary: VirtualBox Guest Additions
url: https://www.virtualbox.org/wiki/VirtualBox
rpm_license: GPLv2 or (GPLv2 and CDDL)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/virtualbox-guest-additions-7.0.4-1.fc37.src.rpm
checksum_type: sha256
description:
  This package replaces the application of Virtualbox's own methodology to
  install Guest Additions (in menu: Devices | Insert Guest Additions CD-image file).
  VirtualBox is a powerful x86 and AMD64/Intel64 virtualization product for
  enterprise as well as home use. This package contains the VirtualBox
  Guest Additions which support better integration of VirtualBox guests
  with the Host, including file sharing, clipboard sharing and Seamless mode.
  Aditional note: this package can be installed on an non-guest system, because it is
  harmless and services would not run anyway.


pkgId: b00d7c098965e2f4dc207df18a966e4747cc8c82cf17dd73e8915277439a568c
name: vkd3d
arch: src
version: 1.5
epoch: 0
release: 1.fc37
summary: D3D12 to Vulkan translation library
url: https://source.winehq.org/git/vkd3d.git
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vkd3d-1.5-1.fc37.src.rpm
checksum_type: sha256
description:
  The vkd3d project includes libraries, shaders, utilities, and demos for
  translating D3D12 to Vulkan.


pkgId: d243dc58e41ded469e10af2b44ae98e20b3a7ea99972df753a40c133199f6d76
name: vl-gothic-fonts
arch: src
version: 20220612
epoch: 0
release: 2.fc37
summary: Japanese TrueType font
url: http://dicey.org/vlgothic
rpm_license: mplus and BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-27.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vl-gothic-fonts-20220612-2.fc37.src.rpm
checksum_type: sha256
description:
  VLGothic provides Japanese TrueType fonts from the Vine Linux project.
  Most of the glyphs are taken from the M+ and Sazanami Gothic fonts,
  but some have also been improved by the project.

  This package provides the monospace VLGothic font.


pkgId: 6734bf65a869af98ca36966eaefb6117d27a2416b0b5718f8853672e43424d88
name: voms-api-java
arch: src
version: 3.3.2
epoch: 0
release: 10.fc37
summary: Virtual Organization Membership Service Java API
url: https://wiki.italiangrid.it/VOMS
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/voms-api-java-3.3.2-10.fc37.src.rpm
checksum_type: sha256
description:
  The Virtual Organization Membership Service (VOMS) is an attribute authority
  which serves as central repository for VO user authorization information,
  providing support for sorting users into group hierarchies, keeping track of
  their roles and other attributes in order to issue trusted attribute
  certificates and SAML assertions used in the Grid environment for
  authorization purposes.

  This package provides a java client API for VOMS.


pkgId: d758d0ad7968ed9d714d876a7a428027a5ad95f75d8dcc16a0f50ea08564f2e8
name: vorta
arch: src
version: 0.8.9
epoch: 0
release: 1.fc37
summary: A GUI for Borg Backup
url: https://vorta.borgbase.com/
rpm_license: GPL-3.0-only AND BSD-2-Clause AND OFL-1.1
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-25.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/v/vorta-0.8.9-1.fc37.src.rpm
checksum_type: sha256
description:
  Vorta is a backup client for macOS and Linux desktops.
  It integrates the mighty BorgBackup with your desktop environment
  to protect your data from disk failure, ransomware and theft


pkgId: ca97be721770ddd55c713e726043126519411e7b540cdf234f76b22a59fc3a69
name: wayland-protocols
arch: src
version: 1.28
epoch: 0
release: 1.fc37
summary: Wayland protocols that adds functionality not available in the core protocol
url: https://wayland.freedesktop.org/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-22.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wayland-protocols-1.28-1.fc37.src.rpm
checksum_type: sha256
description:
  wayland-protocols contains Wayland protocols that adds functionality not
  available in the Wayland core protocol. Such protocols either adds
  completely new functionality, or extends the functionality of some other
  protocol either in Wayland core, or some other protocol in
  wayland-protocols.


pkgId: 8f81206a4e91b17bd9a9688a9c0b8fb31c2bf0655db93ee105993705814fcbe1
name: weechat
arch: src
version: 3.6
epoch: 0
release: 1.fc37
summary: Portable, fast, light and extensible IRC client
url: http://weechat.org
rpm_license: GPLv3
rpm_vendor: Fedora Project
rpm_group: Applications/Communications
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/weechat-3.6-1.fc37.src.rpm
checksum_type: sha256
description:
  WeeChat (Wee Enhanced Environment for Chat) is a portable, fast, light and
  extensible IRC client. Everything can be done with a keyboard.
  It is customizable and extensible with scripts.


pkgId: f17e211d7ab7a1d7c0c185a38afe81e40da40571cbe50bb0e88cecdd3c87507f
name: wike
arch: src
version: 1.8.1
epoch: 0
release: 2.fc37
summary: Wikipedia Reader for the GNOME Desktop
url: https://github.com/hugolabe/wike
rpm_license: GPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wike-1.8.1-2.fc37.src.rpm
checksum_type: sha256
description:
  Wike is a Wikipedia reader for the GNOME Desktop. Provides access to all the
  content of this online encyclopedia in a native application, with a simpler and
  distraction-free view of articles.


pkgId: 46d0fa7a9c2269dcd33fd0bebc87b6c4d493d14c566e4cfd209e0e24e7cbf8f6
name: wimlib
arch: src
version: 1.13.6
epoch: 0
release: 1.fc37
summary: Open source Windows Imaging (WIM) library
url: https://wimlib.net/
rpm_license: GPLv3+ and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wimlib-1.13.6-1.fc37.src.rpm
checksum_type: sha256
description:
  wimlib is a C library for creating, modifying, extracting, and mounting files in
  the Windows Imaging Format (WIM files). wimlib and its command-line frontend
  'wimlib-imagex' provide a free and cross-platform alternative to Microsoft's
  WIMGAPI, ImageX, and DISM.


pkgId: 67b8015892294cc46654963e5966b571de82440fd54fe66734867fbaaa9eddce
name: wine
arch: src
version: 7.20
epoch: 0
release: 1.fc37
summary: A compatibility layer for windows applications
url: https://www.winehq.org/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wine-7.20-1.fc37.src.rpm
checksum_type: sha256
description:
  Wine as a compatibility layer for UNIX to run Windows applications. This
  package includes a program loader, which allows unmodified Windows
  3.x/9x/NT binaries to run on x86 and x86_64 Unixes. Wine can use native system
  .dll files if they are available.

  In Fedora wine is a meta-package which will install everything needed for wine
  to work smoothly. Smaller setups can be achieved by installing some of the
  wine-* sub packages.


pkgId: 735f767689b1cee750a67cd4832dc98a34bb891135faff15c419b584a00ad860
name: wireplumber
arch: src
version: 0.4.12
epoch: 0
release: 1.fc37
summary: A modular session/policy manager for PipeWire
url: https://pipewire.pages.freedesktop.org/wireplumber/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wireplumber-0.4.12-1.fc37.src.rpm
checksum_type: sha256
description:
  WirePlumber is a modular session/policy manager for PipeWire and a
  GObject-based high-level library that wraps PipeWire's API, providing
  convenience for writing the daemon's modules as well as external tools for
  managing PipeWire.


pkgId: 95271cc929c2e85b72feafac2d7719cf8a079f9a3ac447bf904c153b066703ed
name: wireshark
arch: src
version: 4.0.0
epoch: 1
release: 1.fc37
summary: Network traffic analyzer
url: http://www.wireshark.org/
rpm_license: GPL+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wireshark-4.0.0-1.fc37.src.rpm
checksum_type: sha256
description:
  Wireshark allows you to examine protocol data stored in files or as it is
  captured from wired or wireless (WiFi or Bluetooth) networks, USB devices,
  and many other sources.  It supports dozens of protocol capture file formats
  and understands more than a thousand protocols.

  It has many powerful features including a rich display filter language
  and the ability to reassemble multiple protocol packets in order to, for
  example, view a complete TCP stream, save the contents of a file which was
  transferred over HTTP or CIFS, or play back an RTP audio stream.


pkgId: 7544ee4b81293089ca2b61e11369454ce11896c2c89840fc246e361b7a4db94a
name: wl-mirror
arch: src
version: 0.12.2
epoch: 0
release: 1.fc37
summary: Simple Wayland output mirror client
url: https://github.com/Ferdi265/wl-mirror
rpm_license: GPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wl-mirror-0.12.2-1.fc37.src.rpm
checksum_type: sha256
description:
  Simple output mirror client for Wlroots-based compositors.

  wl-mirror attempts to provide a solution to sway's lack of output
  mirroring by mirroring an output onto a client surface.


pkgId: bc64969984f6feac7f68fcdeed5cb8f8479230b4eac4e1bc84d77ccacbf73e14
name: wordpress
arch: src
version: 6.1
epoch: 0
release: 1.fc37
summary: Blog tool and publishing platform
url: http://www.wordpress.org
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wordpress-6.1-1.fc37.src.rpm
checksum_type: sha256
description:
  Wordpress is an online publishing / weblog package that makes it very easy,
  almost trivial, to get information out to people on the web.

  Important information in /usr/share/doc/wordpress/README.fedora


pkgId: d2299cff9460afcf38317e5831be66d0f5b932876ed455883141271a108c0512
name: workrave
arch: src
version: 1.10.50
epoch: 0
release: 1.fc37
summary: Program that assists in the recovery and prevention of RSI
url: http://www.workrave.org/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/workrave-1.10.50-1.fc37.src.rpm
checksum_type: sha256
description:
  Workrave is a program that assists in the recovery and prevention of
  Repetitive Strain Injury (RSI). The program frequently alerts you to
  take micro-pauses, rest breaks and restricts you to your daily limit.


pkgId: 19e63cc0f5cf80da73fa5c3590cd4fd6e5711459fe858fc0f47297745dc6f0cb
name: wsjtx
arch: src
version: 2.5.4
epoch: 0
release: 5.fc37
summary: Weak Signal communication by K1JT
url: http://physics.princeton.edu/pulsar/k1jt/wsjtx.html
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wsjtx-2.5.4-5.fc37.src.rpm
checksum_type: sha256
description:
  WSJT-X is a computer program designed to facilitate basic amateur radio
  communication using very weak signals. It implements communication protocols
  or "modes" called JT4, JT9, JT65, QRA64, ISCAT, MSK144, and WSPR, as well as
  one called Echo for detecting and measuring your own radio signals reflected
  from the Moon.


pkgId: dccd5c796fcc44e57bd1409f88efb31866e9142981a866bd2608314e97a46ba7
name: wxGlade
arch: src
version: 1.0.4
epoch: 0
release: 5.fc37
summary: A wxWidgets/wxPython/wxPerl GUI designer
url: http://wxglade.sourceforge.net
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wxGlade-1.0.4-5.fc37.src.rpm
checksum_type: sha256
description:
  wxGlade is a GUI designer written in Python with the popular GUI
  toolkit wxPython, that helps you create wxWidgets/wxPython user
  interfaces. At the moment it can generate Python, C++, Perl and XRC
  (wxWidgets' XML resources) code.

  Starting from version 0.7.0, wxGlade requires wxPython >= 2.8 and Python >= 2.4
  and <= 2.7.


pkgId: 1389269664a520d60c44b3e1fd006b9627dbf6e1b6a9c4c80b1f4a6676af2cb1
name: wxsqlite3
arch: src
version: 4.8.2
epoch: 0
release: 6.fc37
summary: C++ wrapper around the SQLite 3.x database
url: https://github.com/utelle/wxsqlite3
rpm_license: wxWidgets
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/w/wxsqlite3-4.8.2-6.fc37.src.rpm
checksum_type: sha256
description:
  wxSQLite3 is a C++ wrapper around the public domain SQLite 3.x database and is
  specifically designed for use in programs based on the wxWidgets library.
  wxSQLite3 does not try to hide the underlying database, in contrary almost all
  special features of the current SQLite3 version 3.6.22 are supported, like for
  example the creation of user defined scalar or aggregate functions. Since
  SQLite stores strings in UTF-8 encoding, the wxSQLite3 methods provide
  automatic conversion between wxStrings and UTF-8 strings. This works best for
  the Unicode builds of wxWidgets. In ANSI builds the current locale conversion
  object (wxConvCurrent) is used for conversion to/from UTF-8. Special care has
  to be taken if external administration tools are used to modify the database
  contents, since not all of these tools operate in Unicode resp. UTF-8 mode.
  wxSQLite3 includes an optional extension for SQLite supporting key based
  database file encryption using 128 bit AES encryption. Starting with version
  1.9.6 of wxSQLite3 the encryption extension is compatible with the SQLite
  amalgamation source. Experimental support for 256 bit AES encryption has been
  added in version 1.9.8.


pkgId: 847e944a674322a0a2bc1349938fbf4ec1788df32b991cc03556b7581d8bb757
name: xdg-desktop-portal-kde
arch: src
version: 5.26.3
epoch: 0
release: 1.fc37
summary: Backend implementation for xdg-desktop-portal using Qt/KF5
url: https://invent.kde.org/plasma/xdg-desktop-portal-kde
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xdg-desktop-portal-kde-5.26.3-1.fc37.src.rpm
checksum_type: sha256
description:
  A backend implementation for xdg-desktop-portal that is using Qt/KF5 and various
  pieces of KDE infrastructure.


pkgId: a17bafe3f60dfd6e4376aea994d19c8d782a2abba39ae87e8aa405066c09725f
name: xdotool
arch: src
version: 3.20211022.1
epoch: 1
release: 1.fc37
summary: Fake keyboard/mouse input
url: https://github.com/jordansissel/xdotool
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xdotool-3.20211022.1-1.fc37.src.rpm
checksum_type: sha256
description:
  This tool lets you programmatically (or manually) simulate keyboard input
  and mouse activity, move and re-size windows, etc.


pkgId: 3740e0390006166d3aa2119f4facc97e9f6c0f0c9e77e34c9bfd6cf416f44ec5
name: xen
arch: src
version: 4.16.2
epoch: 0
release: 4.fc37
summary: Xen is a virtual machine monitor
url: http://xen.org/
rpm_license: GPLv2+ and LGPLv2+ and BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xen-4.16.2-4.fc37.src.rpm
checksum_type: sha256
description:
  This package contains the XenD daemon and xm command line
  tools, needed to manage virtual machines running under the
  Xen hypervisor


pkgId: 5798b48566d05abd5a17cf0cc91fbf3dd4436657b6ba1240c30a0a3dc7594a11
name: xephem
arch: src
version: 4.1.0^20221006b7bfc6e
epoch: 0
release: 1.fc37
summary: Scientific-grade interactive astronomical ephemeris software
url: https://xephem.github.io
rpm_license: MIT-advertising and LGPL-2.1-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xephem-4.1.0^20221006b7bfc6e-1.fc37.src.rpm
checksum_type: sha256
description:
  XEphem is a scientific-grade interactive astronomical ephemeris software.
  It can calculate ephemeris for astronomical objects and display the results
  in tabular or graphical output.

  XEphem can also be used to control telescopes, generate sky maps, perform
  image analysis and much more.


pkgId: e50ec42d6a8738f7a85da0284cfe7205b7442b4b05fdcd15ece6d758d1d5b30c
name: xeus
arch: src
version: 2.0.0
epoch: 0
release: 5.fc37
summary: C++ implementation of the Jupyter kernel protocol
url: https://github.com/jupyter-xeus/xeus
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xeus-2.0.0-5.fc37.src.rpm
checksum_type: sha256
description:
  xeus is a library meant to facilitate the implementation of kernels for
  Jupyter. It takes the burden of implementing the Jupyter Kernel protocol so
  developers can focus on implementing the interpreter part of the kernel.


pkgId: a9ec86f764b37a277624e5cbb53f92b3c3d0e31ddd04aa4d03c6ef71f0b96883
name: xlog
arch: src
version: 2.0.22
epoch: 0
release: 9.fc37
summary: Logging program for Hamradio Operators
url: http://www.nongnu.org/xlog/
rpm_license: GPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xlog-2.0.22-9.fc37.src.rpm
checksum_type: sha256
description:
  xlog is a logging program for amateur radio operators. The log is stored
  into a text file. QSO's are presented in a list. Items in the list can be
  added, deleted or updated. For each contact, dxcc information is displayed
  and bearings and distance is calculated, both short and long path.
  xlog supports trlog, adif, cabrillo, edit, twlog and editest files.


pkgId: f5de520a714d529cff353ebabdea9beb7f8b0d46291f149dac768d903425176e
name: xmlsec1
arch: src
version: 1.2.34
epoch: 0
release: 4.fc37
summary: Library providing support for "XML Signature" and "XML Encryption" standards
url: http://www.aleksey.com/xmlsec/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xmlsec1-1.2.34-4.fc37.src.rpm
checksum_type: sha256
description:
  XML Security Library is a C library based on LibXML2  and OpenSSL.
  The library was created with a goal to support major XML security
  standards "XML Digital Signature" and "XML Encryption".


pkgId: c891f89442a310b6f9f4bc3ff38fb0319ad14dea77c77b36cf7d054baeadfc00
name: xorgxrdp
arch: src
version: 0.9.19
epoch: 0
release: 5.fc37
summary: Implementation of xrdp backend as Xorg modules
url: https://github.com/neutrinolabs/xorgxrdp
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xorgxrdp-0.9.19-5.fc37.src.rpm
checksum_type: sha256
description:
  xorgxrdp is a set of X11 modules that make Xorg act as a backend for
  xrdp. Xorg with xorgxrdp is the most advanced xrdp backend with support
  for screen resizing and multiple monitors.


pkgId: 36be3575760149e49d0c5fdf0ee376a4fa6b3d5da5e68ca9bec191df9fa97072
name: xournalpp
arch: src
version: 1.1.2
epoch: 0
release: 1.fc37
summary: Handwriting note-taking software with PDF annotation support
url: https://github.com/xournalpp/xournalpp
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xournalpp-1.1.2-1.fc37.src.rpm
checksum_type: sha256
description:
  Xournal++ is a handwriting note-taking software with PDF annotation support.
  Supports Pen input like Wacom Tablets


pkgId: 8cee23aa23b8b9126f99b9b173b725618a270c7e7c59e7c72b18571ae9dc1301
name: xpra
arch: src
version: 4.4
epoch: 0
release: 1.fc37
summary: Remote display server for applications and desktops
url: https://www.xpra.org/
rpm_license: GPLv2+ and BSD and LGPLv3+ and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xpra-4.4-1.fc37.src.rpm
checksum_type: sha256
description:
  Xpra is "screen for X": it allows you to run X programs, usually on a remote
  host, direct their display to your local machine, and then to disconnect from
  these programs and reconnect from the same or another machine, without losing
  any state. It gives you remote access to individual applications.

  Xpra is "rootless" or "seamless": programs you run under it show up on your
  desktop as regular programs, managed by your regular window manager.
  Sessions can be accessed over SSH, or password protected over plain TCP sockets.
  Xpra is usable over reasonably slow links and does its best to adapt to changing
  network bandwidth constraints.


pkgId: 5d486441b2571dde6fd823db452214035ef12ab0b8c984a69777b493311cdfb6
name: xrootd
arch: src
version: 5.5.1
epoch: 1
release: 1.fc37
summary: Extended ROOT file server
url: https://xrootd.slac.stanford.edu/
rpm_license: LGPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xrootd-5.5.1-1.fc37.src.rpm
checksum_type: sha256
description:
  The Extended root file server consists of a file server called xrootd
  and a cluster management server called cmsd.

  The xrootd server was developed for the root analysis framework to
  serve root files. However, the server is agnostic to file types and
  provides POSIX-like access to any type of file.

  The cmsd server is the next generation version of the olbd server,
  originally developed to cluster and load balance Objectivity/DB AMS
  database servers. It provides enhanced capability along with lower
  latency and increased throughput.


pkgId: ec9cebd6c4df229a01b75a6f0b73c2a245844125bfa89ca4f9738c0ba5c81364
name: xscreensaver
arch: src
version: 6.05
epoch: 1
release: 2.fc37
summary: X screen saver and locker
url: http://www.jwz.org/xscreensaver/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xscreensaver-6.05-2.fc37.src.rpm
checksum_type: sha256
description:
  A modular screen saver and locker for the X Window System.
  More than 200 display modes are included in this package.

  This is a metapackage for installing all default packages
  related to XScreenSaver.


pkgId: 79fbf1220a40cea6aa6087be36b2e9fcb6a555c8da75b5823e6baa9509e0c20d
name: xsnow
arch: src
version: 3.5.3
epoch: 0
release: 1.fc37
summary: Let it snow on your desktop
url: https://sourceforge.net/projects/xsnow/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xsnow-3.5.3-1.fc37.src.rpm
checksum_type: sha256
description:
  Xsnow is a X Window application that will snow on the desktop background.
  Santa and his reindeer will complete your festive-season feeling.
  Xsnow runs in GNOME, KDE, FVWM and desktops that are derived from those.


pkgId: 5ce9f63763d422c2125a996a7863c34179d7992a5fbc7a766c4022fc58042d00
name: xterm
arch: src
version: 375
epoch: 0
release: 1.fc37
summary: Terminal emulator for the X Window System
url: https://invisible-island.net/xterm
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/x/xterm-375-1.fc37.src.rpm
checksum_type: sha256
description:
  The xterm program is a terminal emulator for the X Window System. It
  provides DEC VT102 and Tektronix 4014 compatible terminals for
  programs that can't use the window system directly.


pkgId: 6a6bf2777de3ff857845a3e96e41406cf0c8cd1834a113c62555caf4bc3d5adf
name: yelp-tools
arch: src
version: 42.1
epoch: 0
release: 1.fc37
summary: Create, manage, and publish documentation for Yelp
url: https://wiki.gnome.org/Apps/Yelp/Tools
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-23.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/y/yelp-tools-42.1-1.fc37.src.rpm
checksum_type: sha256
description:
  yelp-tools is a collection of scripts and build utilities to help create,
  manage, and publish documentation for Yelp and the web. Most of the heavy
  lifting is done by packages like yelp-xsl and itstool. This package just
  wraps things up in a developer-friendly way.


pkgId: b46d3951faa130e85b374639093a6fa228035f1bbaac2a57e7836c414b1aa04f
name: yle-dl
arch: src
version: 20221111
epoch: 0
release: 1.fc37
summary: Download videos from Yle servers
url: https://aajanki.github.io/yle-dl/index-en.html
rpm_license: GPL-3.0-or-later
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/y/yle-dl-20221111-1.fc37.src.rpm
checksum_type: sha256
description:
  Command-line program for downloading media files from the video streaming
  services of the Finnish national broadcasting company Yle: Yle Areena,
  Elävä arkisto, and Yle news. The videos are saved in Matroska (.mkv) or MP4
  format.


pkgId: ebb44ffe8fa0f584f80c1d3dd464ba6f0a5db53827722db5cd93fa294c79bd3f
name: yosys
arch: src
version: 0.23
epoch: 0
release: 1.20221109gitc75f12a.fc37
summary: Yosys Open SYnthesis Suite, including Verilog synthesizer
url: http://www.clifford.at/yosys/
rpm_license: ISC and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/y/yosys-0.23-1.20221109gitc75f12a.fc37.src.rpm
checksum_type: sha256
description:
  Yosys is a framework for Verilog RTL synthesis. It currently has
  extensive Verilog-2005 support and provides a basic set of synthesis
  algorithms for various application domains.


pkgId: d180c66ce49c1cfd3144c31e2874630ddd9028dd6eb3415746cd15db8864f7b4
name: yt-dlp
arch: src
version: 2022.11.11
epoch: 0
release: 1.fc37
summary: A command-line program to download videos from online video platforms
url: https://github.com/yt-dlp/yt-dlp
rpm_license: Unlicense
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/y/yt-dlp-2022.11.11-1.fc37.src.rpm
checksum_type: sha256
description:
  yt-dlp is a command-line program to download videos from many different online
  video platforms, such as youtube.com. The project is a fork of youtube-dl with
  additional features and fixes.


pkgId: e9f2a239a183e67c19583af22d2966b12e79a3be5dfa62fd5bc3e386394055e1
name: yubioath-desktop
arch: src
version: 5.1.0
epoch: 0
release: 10.fc37
summary: Yubikey tool for generating OATH event-based HOTP and time-based TOTP codes
url: https://github.com/Yubico/yubioath-desktop/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/y/yubioath-desktop-5.1.0-10.fc37.src.rpm
checksum_type: sha256
description:
  The Yubico Authenticator is a graphical desktop tool and CLI for generating
  Open AuTHentication (OATH) event-based HOTP and time-based TOTP one-time
  password codes, with the help of a YubiKey that protects the shared secrets.


