commit d26b3110041a9fddc6c6e36398f53f7eab8cff82 Author: Greg Kroah-Hartman Date: Tue Jan 19 18:26:19 2021 +0100 Linux 5.4.91 Tested-by: Linux Kernel Functional Testing Tested-by: Jon Hunter Tested-by: Guenter Roeck Link: https://lore.kernel.org/r/20210118152457.528300594@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit 516bd00e5ac113c72534d744b54e11eb9003d237 Author: Florian Westphal Date: Sun Aug 9 20:28:01 2020 +0200 netfilter: nft_compat: remove flush counter optimization commit 2f941622fd88328ca75806c45c9e9709286a0609 upstream. WARNING: CPU: 1 PID: 16059 at lib/refcount.c:31 refcount_warn_saturate+0xdf/0xf [..] __nft_mt_tg_destroy+0x42/0x50 [nft_compat] nft_target_destroy+0x63/0x80 [nft_compat] nf_tables_expr_destroy+0x1b/0x30 [nf_tables] nf_tables_rule_destroy+0x3a/0x70 [nf_tables] nf_tables_exit_net+0x186/0x3d0 [nf_tables] Happens when a compat expr is destoyed from abort path. There is no functional impact; after this work queue is flushed unconditionally if its pending. This removes the waitcount optimization. Test of repeated iptables-restore of a ~60k kubernetes ruleset doesn't indicate a slowdown. In case the counter is needed after all for some workloads we can revert this and increment the refcount for the != NFT_PREPARE_TRANS case to avoid the increment/decrement imbalance. While at it, also flush for match case, this was an oversight in the original patch. Fixes: ffe8923f109b7e ("netfilter: nft_compat: make sure xtables destructors have run") Reported-by: kernel test robot Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 935114863364803172354067061708efd131ca57 Author: Dinghao Liu Date: Sat Jan 9 20:01:21 2021 +0800 netfilter: nf_nat: Fix memleak in nf_nat_init commit 869f4fdaf4ca7bb6e0d05caf6fa1108dddc346a7 upstream. When register_pernet_subsys() fails, nf_nat_bysource should be freed just like when nf_ct_extend_register() fails. Fixes: 1cd472bf036ca ("netfilter: nf_nat: add nat hook register functions to nf_nat") Signed-off-by: Dinghao Liu Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 49fc6d92b484fd7cc75d62d6ee34f9f94a0507cc Author: Jesper Dangaard Brouer Date: Fri Jan 8 12:44:33 2021 +0100 netfilter: conntrack: fix reading nf_conntrack_buckets commit f6351c3f1c27c80535d76cac2299aec44c36291e upstream. The old way of changing the conntrack hashsize runtime was through changing the module param via file /sys/module/nf_conntrack/parameters/hashsize. This was extended to sysctl change in commit 3183ab8997a4 ("netfilter: conntrack: allow increasing bucket size via sysctl too"). The commit introduced second "user" variable nf_conntrack_htable_size_user which shadow actual variable nf_conntrack_htable_size. When hashsize is changed via module param this "user" variable isn't updated. This results in sysctl net/netfilter/nf_conntrack_buckets shows the wrong value when users update via the old way. This patch fix the issue by always updating "user" variable when reading the proc file. This will take care of changes to the actual variable without sysctl need to be aware. Fixes: 3183ab8997a4 ("netfilter: conntrack: allow increasing bucket size via sysctl too") Reported-by: Yoel Caspersen Signed-off-by: Jesper Dangaard Brouer Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 548e4168e68dcd6346254b76de4ec16f556c1e1b Author: Geert Uytterhoeven Date: Mon Jan 11 14:02:51 2021 +0100 ALSA: firewire-tascam: Fix integer overflow in midi_port_work() commit 9f65df9c589f249435255da37a5dd11f1bc86f4d upstream. As snd_fw_async_midi_port.consume_bytes is unsigned int, and NSEC_PER_SEC is 1000000000L, the second multiplication in port->consume_bytes * 8 * NSEC_PER_SEC / 31250 always overflows on 32-bit platforms, truncating the result. Fix this by precalculating "NSEC_PER_SEC / 31250", which is an integer constant. Note that this assumes port->consume_bytes <= 16777. Fixes: 531f471834227d03 ("ALSA: firewire-lib/firewire-tascam: localize async midi port") Reviewed-by: Takashi Sakamoto Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20210111130251.361335-3-geert+renesas@glider.be Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 68e67535e26b29e50e6f97cd27c36b85e2631c13 Author: Geert Uytterhoeven Date: Mon Jan 11 14:02:50 2021 +0100 ALSA: fireface: Fix integer overflow in transmit_midi_msg() commit e7c22eeaff8565d9a8374f320238c251ca31480b upstream. As snd_ff.rx_bytes[] is unsigned int, and NSEC_PER_SEC is 1000000000L, the second multiplication in ff->rx_bytes[port] * 8 * NSEC_PER_SEC / 31250 always overflows on 32-bit platforms, truncating the result. Fix this by precalculating "NSEC_PER_SEC / 31250", which is an integer constant. Note that this assumes ff->rx_bytes[port] <= 16777. Fixes: 19174295788de77d ("ALSA: fireface: add transaction support") Reviewed-by: Takashi Sakamoto Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20210111130251.361335-2-geert+renesas@glider.be Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 2c3d03cdbd395a619b0b9503a110dd51244b9a48 Author: Mike Snitzer Date: Wed Jan 6 18:19:05 2021 -0500 dm: eliminate potential source of excessive kernel log noise commit 0378c625afe80eb3f212adae42cc33c9f6f31abf upstream. There wasn't ever a real need to log an error in the kernel log for ioctls issued with insufficient permissions. Simply return an error and if an admin/user is sufficiently motivated they can enable DM's dynamic debugging to see an explanation for why the ioctls were disallowed. Reported-by: Nir Soffer Fixes: e980f62353c6 ("dm: don't allow ioctls to targets that don't map to whole devices") Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit a34294774a32e48a213490cd74f87bb3d02403e7 Author: j.nixdorf@avm.de Date: Tue Jan 5 15:17:01 2021 +0100 net: sunrpc: interpret the return value of kstrtou32 correctly commit 86b53fbf08f48d353a86a06aef537e78e82ba721 upstream. A return value of 0 means success. This is documented in lib/kstrtox.c. This was found by trying to mount an NFS share from a link-local IPv6 address with the interface specified by its index: mount("[fe80::1%1]:/srv/nfs", "/mnt", "nfs", 0, "nolock,addr=fe80::1%1") Before this commit this failed with EINVAL and also caused the following message in dmesg: [...] NFS: bad IP address specified: addr=fe80::1%1 The syscall using the same address based on the interface name instead of its index succeeds. Credits for this patch go to my colleague Christian Speich, who traced the origin of this bug to this line of code. Signed-off-by: Johannes Nixdorf Fixes: 00cfaa943ec3 ("replace strict_strto calls") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit 8b5107a74db36d1f22454330cb57900043a49f82 Author: Lu Baolu Date: Thu Dec 31 08:53:20 2020 +0800 iommu/vt-d: Fix unaligned addresses for intel_flush_svm_range_dev() commit 2d6ffc63f12417b979955a5b22ad9a76d2af5de9 upstream. The VT-d hardware will ignore those Addr bits which have been masked by the AM field in the PASID-based-IOTLB invalidation descriptor. As the result, if the starting address in the descriptor is not aligned with the address mask, some IOTLB caches might not invalidate. Hence people will see below errors. [ 1093.704661] dmar_fault: 29 callbacks suppressed [ 1093.704664] DMAR: DRHD: handling fault status reg 3 [ 1093.712738] DMAR: [DMA Read] Request device [7a:02.0] PASID 2 fault addr 7f81c968d000 [fault reason 113] SM: Present bit in first-level paging entry is clear Fix this by using aligned address for PASID-based-IOTLB invalidation. Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode") Reported-and-tested-by: Guo Kaijie Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20201231005323.2178523-2-baolu.lu@linux.intel.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit c2226680343da071279788624aa6e59479b25e2f Author: Jann Horn Date: Tue Jan 12 15:49:04 2021 -0800 mm, slub: consider rest of partial list if acquire_slab() fails commit 8ff60eb052eeba95cfb3efe16b08c9199f8121cf upstream. acquire_slab() fails if there is contention on the freelist of the page (probably because some other CPU is concurrently freeing an object from the page). In that case, it might make sense to look for a different page (since there might be more remote frees to the page from other CPUs, and we don't want contention on struct page). However, the current code accidentally stops looking at the partial list completely in that case. Especially on kernels without CONFIG_NUMA set, this means that get_partial() fails and new_slab_objects() falls back to new_slab(), allocating new pages. This could lead to an unnecessary increase in memory fragmentation. Link: https://lkml.kernel.org/r/20201228130853.1871516-1-jannh@google.com Fixes: 7ced37197196 ("slub: Acquire_slab() avoid loop") Signed-off-by: Jann Horn Acked-by: David Rientjes Acked-by: Joonsoo Kim Cc: Christoph Lameter Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit cd9e901fe2fc70a9c27fbcb542f0ac2629fb1661 Author: Hans de Goede Date: Wed Nov 18 13:40:58 2020 +0100 drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence commit 00cb645fd7e29bdd20967cd20fa8f77bcdf422f9 upstream. Commit 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode") added an intel_dsi_msleep() helper which skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode; and it moved a bunch of msleep-s over to this new helper. This was based on my reading of the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries. Given that this code has been used on a lot of different devices without issues until now, it seems that my interpretation of the spec here is mostly correct. But now I have encountered one device, an Acer Aspire Switch 10 E SW3-016, where the panel will not light up unless we do actually honor the panel_on_delay after exexuting the MIPI_SEQ_PANEL_ON sequence. What seems to set this model apart is that it is lacking a MIPI_SEQ_DEASSERT_RESET sequence, which is where the power-on delay usually happens. Fix the panel not lighting up on this model by using an unconditional msleep(panel_on_delay) instead of intel_dsi_msleep() when there is no MIPI_SEQ_DEASSERT_RESET sequence. Fixes: 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode") Signed-off-by: Hans de Goede Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20201118124058.26021-1-hdegoede@redhat.com (cherry picked from commit 6fdb335f1c9c0845b50625de1624d8445c4c4a07) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit 9269296721b546e16ee7faa5eaf1c9363bcb7b08 Author: Parav Pandit Date: Wed Jan 13 14:17:00 2021 +0200 IB/mlx5: Fix error unwinding when set_has_smi_cap fails commit 2cb091f6293df898b47f4e0f2e54324e2bbaf816 upstream. When set_has_smi_cap() fails, multiport master cleanup is missed. Fix it by doing the correct error unwinding goto. Fixes: a989ea01cb10 ("RDMA/mlx5: Move SMI caps logic") Link: https://lore.kernel.org/r/20210113121703.559778-3-leon@kernel.org Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 40a78229354517df963aa257821c5082bb93c40f Author: Mark Bloch Date: Wed Jan 13 14:17:03 2021 +0200 RDMA/mlx5: Fix wrong free of blue flame register on error commit 1c3aa6bd0b823105c2030af85d92d158e815d669 upstream. If the allocation of the fast path blue flame register fails, the driver should free the regular blue flame register allocated a statement above, not the one that it just failed to allocate. Fixes: 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") Link: https://lore.kernel.org/r/20210113121703.559778-6-leon@kernel.org Reported-by: Hans Petter Selasky Signed-off-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit e8c8d2319bd794e1abd06f1d3ff3d5e70c4a60b7 Author: Michael Chan Date: Mon Jan 11 04:26:39 2021 -0500 bnxt_en: Improve stats context resource accounting with RDMA driver loaded. commit 869c4d5eb1e6fbda66aa790c48bdb946d71494a0 upstream. The function bnxt_get_ulp_stat_ctxs() does not count the stats contexts used by the RDMA driver correctly when the RDMA driver is freeing the MSIX vectors. It assumes that if the RDMA driver is registered, the additional stats contexts will be needed. This is not true when the RDMA driver is about to unregister and frees the MSIX vectors. This slight error leads to over accouting of the stats contexts needed after the RDMA driver has unloaded. This will cause some firmware warning and error messages in dmesg during subsequent config. changes or ifdown/ifup. Fix it by properly accouting for extra stats contexts only if the RDMA driver is registered and MSIX vectors have been successfully requested. Fixes: c027c6b4e91f ("bnxt_en: get rid of num_stat_ctxs variable") Reviewed-by: Yongping Zhang Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 3bcf35a7c05f2e734a1b04d1dee76067f1816a7e Author: Dinghao Liu Date: Sat Dec 26 15:42:48 2020 +0800 RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp commit a306aba9c8d869b1fdfc8ad9237f1ed718ea55e6 upstream. If usnic_ib_qp_grp_create() fails at the first call, dev_list will not be freed on error, which leads to memleak. Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver") Link: https://lore.kernel.org/r/20201226074248.2893-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit da834a9bdc230b7cf437680acd0179960e007737 Author: Leon Romanovsky Date: Wed Dec 16 12:07:53 2020 +0200 RDMA/restrack: Don't treat as an error allocation ID wrapping commit 3c638cdb8ecc0442552156e0fed8708dd2c7f35b upstream. xa_alloc_cyclic() call returns positive number if ID allocation succeeded but wrapped. It is not an error, so normalize the "ret" variable to zero as marker of not-an-error. drivers/infiniband/core/restrack.c:261 rdma_restrack_add() warn: 'ret' can be either negative or positive Fixes: fd47c2f99f04 ("RDMA/restrack: Convert internal DB from hash to XArray") Link: https://lore.kernel.org/r/20201216100753.1127638-1-leon@kernel.org Reported-by: Dan Carpenter Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 986fdc7685fab266949e800e89a9212d32946083 Author: Jan Kara Date: Wed Dec 16 11:18:43 2020 +0100 ext4: fix superblock checksum failure when setting password salt commit dfd56c2c0c0dbb11be939b804ddc8d5395ab3432 upstream. When setting password salt in the superblock, we forget to recompute the superblock checksum so it will not match until the next superblock modification which recomputes the checksum. Fix it. CC: Michael Halcrow Reported-by: Andreas Dilger Fixes: 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support") Signed-off-by: Jan Kara Link: https://lore.kernel.org/r/20201216101844.22917-8-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 38992092b54e3f3847a102087c946fea8f15280c Author: Trond Myklebust Date: Sun Jan 10 15:58:08 2021 -0500 NFS: nfs_igrab_and_active must first reference the superblock commit 896567ee7f17a8a736cda8a28cc987228410a2ac upstream. Before referencing the inode, we must ensure that the superblock can be referenced. Otherwise, we can end up with iput() calling superblock operations that are no longer valid or accessible. Fixes: ea7c38fef0b7 ("NFSv4: Ensure we reference the inode for return-on-close in delegreturn") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit 6b3ae2030db9a3ee058906a1be342a12684b6c4e Author: Trond Myklebust Date: Wed Jan 6 14:13:22 2021 -0500 NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter commit cb2856c5971723910a86b7d1d0cf623d6919cbc4 upstream. If we exit _lgopen_prepare_attached() without setting a layout, we will currently leak the plh_outstanding counter. Fixes: 411ae722d10a ("pNFS: Wait for stale layoutget calls to complete in pnfs_update_layout()") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit aa2399f55eff4ec78330bb6fe55f9df53e5cae0c Author: Trond Myklebust Date: Tue Jan 5 06:43:45 2021 -0500 pNFS: Stricter ordering of layoutget and layoutreturn commit 2c8d5fc37fe2384a9bdb6965443ab9224d46f704 upstream. If a layout return is in progress, we should wait for it to complete, in case the layout segment we are picking up gets returned too. Fixes: 30cb3ee299cb ("pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit 78c2ab7f5265a18fd5192225f1fad21765192b0b Author: Trond Myklebust Date: Mon Jan 4 13:35:46 2021 -0500 pNFS: Mark layout for return if return-on-close was not sent commit 67bbceedc9bb8ad48993a8bd6486054756d711f4 upstream. If the layout return-on-close failed because the layoutreturn was never sent, then we should mark the layout for return again. Fixes: 9c47b18cf722 ("pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit 7d1241ae1dce008992fb3a4418ff8c0b550528b0 Author: Trond Myklebust Date: Mon Jan 4 13:18:03 2021 -0500 pNFS: We want return-on-close to complete when evicting the inode commit 078000d02d57f02dde61de4901f289672e98c8bc upstream. If the inode is being evicted, it should be safe to run return-on-close, so we should do it to ensure we don't inadvertently leak layout segments. Fixes: 1c5bd76d17cc ("pNFS: Enable layoutreturn operation for return-on-close") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit 69d121ca892c73ad3e7a3df92328a5a693b9ffac Author: Dave Wysochanski Date: Fri Dec 11 05:12:51 2020 -0500 NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock commit 3d1a90ab0ed93362ec8ac85cf291243c87260c21 upstream. It is only safe to call the tracepoint before rpc_put_task() because 'data' is freed inside nfs4_lock_release (rpc_release). Fixes: 48c9579a1afe ("Adding stateid information to tracepoints") Signed-off-by: Dave Wysochanski Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit c70f6e0ac9f9350cd8cf3fcc2e55c5daa776d653 Author: Sagi Grimberg Date: Wed Jan 13 13:56:57 2021 -0800 nvme-tcp: fix possible data corruption with bio merges commit ca1ff67d0fb14f39cf0cc5102b1fbcc3b14f6fb9 upstream. When a bio merges, we can get a request that spans multiple bios, and the overall request payload size is the sum of all bios. When we calculate how much we need to send from the existing bio (and bvec), we did not take into account the iov_iter byte count cap. Since multipage bvecs support, bvecs can split in the middle which means that when we account for the last bvec send we should also take the iov_iter byte count cap as it might be lower than the last bvec size. Reported-by: Hao Wang Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Tested-by: Hao Wang Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman commit 55a102004376860738be22e43f4b6a0f0826c15a Author: Dan Carpenter Date: Fri Dec 11 13:06:52 2020 +0300 ASoC: Intel: fix error code cnl_set_dsp_D0() commit f373a811fd9a69fc8bafb9bcb41d2cfa36c62665 upstream. Return -ETIMEDOUT if the dsp boot times out instead of returning success. Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform") Signed-off-by: Dan Carpenter Reviewed-by: Cezary Rojewski Link: https://lore.kernel.org/r/X9NEvCzuN+IObnTN@mwanda Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 2392a54de8baf2862b356c27c32ca267d44d1f01 Author: Jerome Brunet Date: Thu Dec 17 16:08:34 2020 +0100 ASoC: meson: axg-tdmin: fix axg skew offset commit a84dfb3d55934253de6aed38ad75990278a2d21e upstream. The signal captured on from tdm decoder of the AXG SoC is incorrect. It appears amplified. The skew offset of the decoder is wrong. Setting the skew offset to 3, like the g12 and sm1 SoCs, solves and gives correct data. Fixes: 13a22e6a98f8 ("ASoC: meson: add tdm input driver") Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20201217150834.3247526-1-jbrunet@baylibre.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 973900cd4614a1d17ec718bcf9a9c6d713eab214 Author: Jerome Brunet Date: Thu Dec 17 16:08:12 2020 +0100 ASoC: meson: axg-tdm-interface: fix loopback commit 671ee4db952449acde126965bf76817a3159040d upstream. When the axg-tdm-interface was introduced, the backend DAI was marked as an endpoint when DPCM was walking the DAPM graph to find a its BE. It is no longer the case since this commit 8dd26dff00c0 ("ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks") Because of this, when DPCM finds a BE it does everything it needs on the DAIs but it won't power up the widgets between the FE and the BE if there is no actual endpoint after the BE. On meson-axg HWs, the loopback is a special DAI of the tdm-interface BE. It is only linked to the dummy codec since there no actual HW after it. >From the DAPM perspective, the DAI has no endpoint. Because of this, the TDM decoder, which is a widget between the FE and BE is not powered up. >From the user perspective, everything seems fine but no data is produced. Connecting the Loopback DAI to a dummy DAPM endpoint solves the problem. Fixes: 8dd26dff00c0 ("ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks") Cc: Charles Keepax Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20201217150812.3247405-1-jbrunet@baylibre.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 08eb8a735c113ff945a6f08c569b99dae3543a92 Author: Al Viro Date: Tue Jan 5 14:43:46 2021 -0500 dump_common_audit_data(): fix racy accesses to ->d_name commit d36a1dd9f77ae1e72da48f4123ed35627848507d upstream. We are not guaranteed the locking environment that would prevent dentry getting renamed right under us. And it's possible for old long name to be freed after rename, leading to UAF here. Cc: stable@kernel.org # v2.6.2+ Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit d443cefd9f733b037f3b82424823ba993a87062c Author: Adrian Hunter Date: Thu Jan 7 19:41:59 2021 +0200 perf intel-pt: Fix 'CPU too large' error commit 5501e9229a80d95a1ea68609f44c447a75d23ed5 upstream. In some cases, the number of cpus (nr_cpus_online) is confused with the maximum cpu number (nr_cpus_avail), which results in the error in the example below: Example on system with 8 cpus: Before: # echo 0 > /sys/devices/system/cpu/cpu2/online # ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.147 MB perf.data ] # ./perf script --itrace=e Requested CPU 7 too large. Consider raising MAX_NR_CPUS 0x25908 [0x8]: failed to process type: 68 [Invalid argument] After: # ./perf script --itrace=e # Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Signed-off-by: Adrian Hunter Tested-by: Kan Liang Cc: Jiri Olsa Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit 221dee1d0d4e02493c6c39278bdf51b32a322a05 Author: Arnd Bergmann Date: Wed Dec 30 16:20:05 2020 +0100 ARM: picoxcell: fix missing interrupt-parent properties [ Upstream commit bac717171971176b78c72d15a8b6961764ab197f ] dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin commit ba74e0f222c7394eae16cbe91233aa34ba5122ea Author: Craig Tatlor Date: Wed Dec 30 17:29:42 2020 +0200 drm/msm: Call msm_init_vram before binding the gpu [ Upstream commit d863f0c7b536288e2bd40cbc01c10465dd226b11 ] vram.size is needed when binding a gpu without an iommu and is defined in msm_init_vram(), so run that before binding it. Signed-off-by: Craig Tatlor Reviewed-by: Brian Masney Tested-by: Alexey Minnekhanov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 0251d3eb4480a22b146aa552c22c5d43cc84d65e Author: Shawn Guo Date: Thu Dec 31 19:35:25 2020 +0800 ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI [ Upstream commit ee61cfd955a64a58ed35cbcfc54068fcbd486945 ] It adds a stub acpi_create_platform_device() for !CONFIG_ACPI build, so that caller doesn't have to deal with !CONFIG_ACPI build issue. Reported-by: kernel test robot Signed-off-by: Shawn Guo Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit bfdd0a3b86c30342f2041837db0345f9ae3d4370 Author: Peter Robinson Date: Wed Jan 6 00:16:05 2021 +0000 usb: typec: Fix copy paste error for NVIDIA alt-mode description [ Upstream commit 41952a66015466c3208aac96b14ffd92e0943589 ] The name of the module for the NVIDIA alt-mode is incorrect as it looks to be a copy-paste error from the entry above, update it to the correct typec_nvidia module name. Cc: Ajay Gupta Cc: Heikki Krogerus Signed-off-by: Peter Robinson Link: https://lore.kernel.org/r/20210106001605.167917-1-pbrobinson@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 644baa95db2b27d4703f123d040c1d83ee058a83 Author: Dennis Li Date: Wed Dec 30 19:45:15 2020 +0800 drm/amdgpu: fix a GPU hang issue when remove device [ Upstream commit 88e21af1b3f887d217f2fb14fc7e7d3cd87ebf57 ] When GFXOFF is enabled and GPU is idle, driver will fail to access some registers. Therefore change to disable power gating before all access registers with MMIO. Dmesg log is as following: amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device. amdgpu: cp queue pipe 4 queue 0 preemption failed amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2 amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706 amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2 amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706 Signed-off-by: Dennis Li Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 596b3423fddcdc866f3cff0542edfffbc8b061cd Author: Israel Rukshin Date: Tue Jan 5 10:46:54 2021 +0200 nvmet-rdma: Fix list_del corruption on queue establishment failure [ Upstream commit 9ceb7863537748c67fa43ac4f2f565819bbd36e4 ] When a queue is in NVMET_RDMA_Q_CONNECTING state, it may has some requests at rsp_wait_list. In case a disconnect occurs at this state, no one will empty this list and will return the requests to free_rsps list. Normally nvmet_rdma_queue_established() free those requests after moving the queue to NVMET_RDMA_Q_LIVE state, but in this case __nvmet_rdma_queue_disconnect() is called before. The crash happens at nvmet_rdma_free_rsps() when calling list_del(&rsp->free_list), because the request exists only at the wait list. To fix the issue, simply clear rsp_wait_list when destroying the queue. Signed-off-by: Israel Rukshin Reviewed-by: Max Gurtovoy Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit 4cb77b877fcc695d1a31b36e3f7bf835784dc4f4 Author: Gopal Tiwari Date: Fri Dec 4 21:46:57 2020 +0530 nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN [ Upstream commit 7ee5c78ca3895d44e918c38332921983ed678be0 ] A system with more than one of these SSDs will only have one usable. Hence the kernel fails to detect nvme devices due to duplicate cntlids. [ 6.274554] nvme nvme1: Duplicate cntlid 33 with nvme0, rejecting [ 6.274566] nvme nvme1: Removing after probe failure status: -22 Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue. Signed-off-by: Gopal Tiwari Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit 242793c7ef2fe941a42702d37dbc2591979bc32d Author: Po-Hsu Lin Date: Tue Jan 5 18:17:40 2021 +0800 selftests: fix the return value for UDP GRO test [ Upstream commit 3503ee6c0bec5f173d606359e6384a5ef85492fb ] The udpgro.sh will always return 0 (unless the bpf selftest was not build first) even if there are some failed sub test-cases. Therefore the kselftest framework will report this case is OK. Check and return the exit status of each test to make it easier to spot real failures. Signed-off-by: Po-Hsu Lin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 5fc06b706432285562023efa5e1134a4f0a12189 Author: Michael Ellerman Date: Tue Jan 5 20:15:15 2021 +1100 net: ethernet: fs_enet: Add missing MODULE_LICENSE [ Upstream commit 445c6198fe7be03b7d38e66fe8d4b3187bc251d4 ] Since commit 1d6cd3929360 ("modpost: turn missing MODULE_LICENSE() into error") the ppc32_allmodconfig build fails with: ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-fec.o ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-bitbang.o Add the missing MODULE_LICENSEs to fix the build. Both files include a copyright header indicating they are GPL v2. Signed-off-by: Michael Ellerman Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 15a8491cdcd4a24ffd547fb5b35b6954218ea54b Author: Arnd Bergmann Date: Sun Jan 3 22:36:22 2021 +0100 misdn: dsp: select CONFIG_BITREVERSE [ Upstream commit 51049bd903a81307f751babe15a1df8d197884e8 ] Without this, we run into a link error arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o: in function `dsp_audio_generate_law_tables': (.text+0x30c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o:(.text+0x5e4): more undefined references to `byte_rev_table' follow Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 635a658de303556053815b6a74ccefcf548f19a2 Author: Randy Dunlap Date: Mon Jan 4 19:44:53 2021 -0800 arch/arc: add copy_user_page() to to fix build error on ARC [ Upstream commit 8a48c0a3360bf2bf4f40c980d0ec216e770e58ee ] fs/dax.c uses copy_user_page() but ARC does not provide that interface, resulting in a build error. Provide copy_user_page() in . ../fs/dax.c: In function 'copy_cow_page_dax': ../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot Signed-off-by: Randy Dunlap Cc: Vineet Gupta Cc: linux-snps-arc@lists.infradead.org Cc: Dan Williams #Acked-by: Vineet Gupta # v1 Cc: Andrew Morton Cc: Matthew Wilcox Cc: Jan Kara Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org #Reviewed-by: Ira Weiny # v2 Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin commit bc68af1fdcac9f80fdcfc940aadb83a85306f2f1 Author: Jan Kara Date: Thu Dec 10 10:44:33 2020 +0100 bfq: Fix computation of shallow depth [ Upstream commit 6d4d273588378c65915acaf7b2ee74e9dd9c130a ] BFQ computes number of tags it allows to be allocated for each request type based on tag bitmap. However it uses 1 << bitmap.shift as number of available tags which is wrong. 'shift' is just an internal bitmap value containing logarithm of how many bits bitmap uses in each bitmap word. Thus number of tags allowed for some request types can be far to low. Use proper bitmap.depth which has the number of tags instead. Signed-off-by: Jan Kara Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 2abc54579d1b986801b321901a9f8658e6252199 Author: John Millikin Date: Wed Dec 23 15:23:25 2020 +0900 lib/raid6: Let $(UNROLL) rules work with macOS userland [ Upstream commit 0c36d88cff4d72149f94809303c5180b6f716d39 ] Older versions of BSD awk are fussy about the order of '-v' and '-f' flags, and require a space after the flag name. This causes build failures on platforms with an old awk, such as macOS and NetBSD. Since GNU awk and modern versions of BSD awk (distributed with FreeBSD/OpenBSD) are fine with either form, the definition of 'cmd_unroll' can be trivially tweaked to let the lib/raid6 Makefile work with both old and new awk flag dialects. Signed-off-by: John Millikin Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit 1d05b91ab72eb31289f877f9932380ad251f06e4 Author: Uwe Kleine-König Date: Tue Dec 15 10:20:30 2020 +0100 hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values [ Upstream commit 1eda52334e6d13eb1a85f713ce06dd39342b5020 ] With MAX_PWM being defined to 255 the code unsigned long period; ... period = ctx->pwm->args.period; state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM); calculates a too small value for duty_cycle if the configured period is big (either by discarding the 64 bit value ctx->pwm->args.period or by overflowing the multiplication). As this results in a too slow fan and so maybe an overheating machine better be safe than sorry and error out in .probe. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20201215092031.152243-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 1229d433960cd91140ba2c318867cca7f3e270c3 Author: Dinghao Liu Date: Sat Dec 26 15:27:14 2020 +0800 habanalabs: Fix memleak in hl_device_reset [ Upstream commit b000700d6db50c933ce8b661154e26cf4ad06dba ] When kzalloc() fails, we should execute hl_mmu_fini() to release the MMU module. It's the same when hl_ctx_init() fails. Signed-off-by: Dinghao Liu Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay Signed-off-by: Sasha Levin commit 93aef8e6cc08391d5c288177dcb46fe1fd88f240 Author: Oded Gabbay Date: Mon Dec 14 12:52:06 2020 +0200 habanalabs: register to pci shutdown callback [ Upstream commit fcaebc7354188b0d708c79df4390fbabd4d9799d ] We need to make sure our device is idle when rebooting a virtual machine. This is done in the driver level. The firmware will later handle FLR but we want to be extra safe and stop the devices until the FLR is handled. Signed-off-by: Oded Gabbay Signed-off-by: Sasha Levin commit 79df21218d639f560ae2e9dfb89a76757ea334d8 Author: Rasmus Villemoes Date: Fri Dec 18 11:55:37 2020 +0100 ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pram [ Upstream commit 887078de2a23689e29d6fa1b75d7cbc544c280be ] Table 8-53 in the QUICC Engine Reference manual shows definitions of fields up to a size of 192 bytes, not just 128. But in table 8-111, one does find the text Base Address of the Global Transmitter Parameter RAM Page. [...] The user needs to allocate 128 bytes for this page. The address must be aligned to the page size. I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual; they both have this inconsistency (and the table numbers are the same). Adding a bit of debug printing, on my board the struct ucc_geth_tx_global_pram is allocated at offset 0x880, while the (opaque) ucc_geth_thread_data_tx gets allocated immediately afterwards, at 0x900. So whatever the engine writes into the thread data overlaps with the tail of the global tx pram (and devmem says that something does get written during a simple ping). I haven't observed any failure that could be attributed to this, but it seems to be the kind of thing that would be extremely hard to debug. So extend the struct definition so that we do allocate 192 bytes. Signed-off-by: Rasmus Villemoes Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 331a6438ebfd5db0ca674f0502c1d32c6c7f3986 Author: Guido Günther Date: Fri Dec 18 19:38:07 2020 +0100 regulator: bd718x7: Add enable times [ Upstream commit 3b66e4a8e58a85af3212c7117d7a29c9ef6679a2 ] Use the typical startup times from the data sheet so boards get a reasonable default. Not setting any enable time can lead to board hangs when e.g. clocks are enabled too soon afterwards. This fixes gpu power domain resume on the Librem 5. [Moved #defines into driver, seems to be general agreement and avoids any cross tree issues -- broonie] Signed-off-by: Guido Günther Reviewed-by: Matti Vaittinen Link: https://lore.kernel.org/r/41fb2ed19f584f138336344e2297ae7301f72b75.1608316658.git.agx@sigxcpu.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit d5f996bea464e144e2fbc81c72215f1dc663f8fd Author: Filipe Manana Date: Mon Dec 14 10:10:45 2020 +0000 btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan [ Upstream commit cb13eea3b49055bd78e6ddf39defd6340f7379fc ] If we remount a filesystem in RO mode while the qgroup rescan worker is running, we can end up having it still running after the remount is done, and at unmount time we may end up with an open transaction that ends up never getting committed. If that happens we end up with several memory leaks and can crash when hardware acceleration is unavailable for crc32c. Possibly it can lead to other nasty surprises too, due to use-after-free issues. The following steps explain how the problem happens. 1) We have a filesystem mounted in RW mode and the qgroup rescan worker is running; 2) We remount the filesystem in RO mode, and never stop/pause the rescan worker, so after the remount the rescan worker is still running. The important detail here is that the rescan task is still running after the remount operation committed any ongoing transaction through its call to btrfs_commit_super(); 3) The rescan is still running, and after the remount completed, the rescan worker started a transaction, after it finished iterating all leaves of the extent tree, to update the qgroup status item in the quotas tree. It does not commit the transaction, it only releases its handle on the transaction; 4) A filesystem unmount operation starts shortly after; 5) The unmount task, at close_ctree(), stops the transaction kthread, which had not had a chance to commit the open transaction since it was sleeping and the commit interval (default of 30 seconds) has not yet elapsed since the last time it committed a transaction; 6) So after stopping the transaction kthread we still have the transaction used to update the qgroup status item open. At close_ctree(), when the filesystem is in RO mode and no transaction abort happened (or the filesystem is in error mode), we do not expect to have any transaction open, so we do not call btrfs_commit_super(); 7) We then proceed to destroy the work queues, free the roots and block groups, etc. After that we drop the last reference on the btree inode by calling iput() on it. Since there are dirty pages for the btree inode, corresponding to the COWed extent buffer for the quotas btree, btree_write_cache_pages() is invoked to flush those dirty pages. This results in creating a bio and submitting it, which makes us end up at btrfs_submit_metadata_bio(); 8) At btrfs_submit_metadata_bio() we end up at the if-then-else branch that calls btrfs_wq_submit_bio(), because check_async_write() returned a value of 1. This value of 1 is because we did not have hardware acceleration available for crc32c, so BTRFS_FS_CSUM_IMPL_FAST was not set in fs_info->flags; 9) Then at btrfs_wq_submit_bio() we call btrfs_queue_work() against the workqueue at fs_info->workers, which was already freed before by the call to btrfs_stop_all_workers() at close_ctree(). This results in an invalid memory access due to a use-after-free, leading to a crash. When this happens, before the crash there are several warnings triggered, since we have reserved metadata space in a block group, the delayed refs reservation, etc: ------------[ cut here ]------------ WARNING: CPU: 4 PID: 1729896 at fs/btrfs/block-group.c:125 btrfs_put_block_group+0x63/0xa0 [btrfs] Modules linked in: btrfs dm_snapshot dm_thin_pool (...) CPU: 4 PID: 1729896 Comm: umount Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_put_block_group+0x63/0xa0 [btrfs] Code: f0 01 00 00 48 39 c2 75 (...) RSP: 0018:ffffb270826bbdd8 EFLAGS: 00010206 RAX: 0000000000000001 RBX: ffff947ed73e4000 RCX: ffff947ebc8b29c8 RDX: 0000000000000001 RSI: ffffffffc0b150a0 RDI: ffff947ebc8b2800 RBP: ffff947ebc8b2800 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ed73e4110 R13: ffff947ed73e4160 R14: ffff947ebc8b2988 R15: dead000000000100 FS: 00007f15edfea840(0000) GS:ffff9481ad600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f37e2893320 CR3: 0000000138f68001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_free_block_groups+0x17f/0x2f0 [btrfs] close_ctree+0x2ba/0x2fa [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0x100/0x160 task_work_run+0x68/0xb0 exit_to_user_mode_prepare+0x1bb/0x1c0 syscall_exit_to_user_mode+0x4b/0x260 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f15ee221ee7 Code: ff 0b 00 f7 d8 64 89 01 48 (...) RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7 RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000 RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0 R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000 R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [] copy_process+0x8a0/0x1d70 softirqs last enabled at (0): [] copy_process+0x8a0/0x1d70 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace dd74718fef1ed5c6 ]--- ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1729896 at fs/btrfs/block-rsv.c:459 btrfs_release_global_block_rsv+0x70/0xc0 [btrfs] Modules linked in: btrfs dm_snapshot dm_thin_pool (...) CPU: 2 PID: 1729896 Comm: umount Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_release_global_block_rsv+0x70/0xc0 [btrfs] Code: 48 83 bb b0 03 00 00 00 (...) RSP: 0018:ffffb270826bbdd8 EFLAGS: 00010206 RAX: 000000000033c000 RBX: ffff947ed73e4000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffffc0b0d8c1 RDI: 00000000ffffffff RBP: ffff947ebc8b7000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ed73e4110 R13: ffff947ed73e5278 R14: dead000000000122 R15: dead000000000100 FS: 00007f15edfea840(0000) GS:ffff9481aca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561a79f76e20 CR3: 0000000138f68006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_free_block_groups+0x24c/0x2f0 [btrfs] close_ctree+0x2ba/0x2fa [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0x100/0x160 task_work_run+0x68/0xb0 exit_to_user_mode_prepare+0x1bb/0x1c0 syscall_exit_to_user_mode+0x4b/0x260 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f15ee221ee7 Code: ff 0b 00 f7 d8 64 89 01 (...) RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7 RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000 RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0 R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000 R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [] copy_process+0x8a0/0x1d70 softirqs last enabled at (0): [] copy_process+0x8a0/0x1d70 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace dd74718fef1ed5c7 ]--- ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1729896 at fs/btrfs/block-group.c:3377 btrfs_free_block_groups+0x25d/0x2f0 [btrfs] Modules linked in: btrfs dm_snapshot dm_thin_pool (...) CPU: 5 PID: 1729896 Comm: umount Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_free_block_groups+0x25d/0x2f0 [btrfs] Code: ad de 49 be 22 01 00 (...) RSP: 0018:ffffb270826bbde8 EFLAGS: 00010206 RAX: ffff947ebeae1d08 RBX: ffff947ed73e4000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff947e9d823ae8 RDI: 0000000000000246 RBP: ffff947ebeae1d08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ebeae1c00 R13: ffff947ed73e5278 R14: dead000000000122 R15: dead000000000100 FS: 00007f15edfea840(0000) GS:ffff9481ad200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1475d98ea8 CR3: 0000000138f68005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: close_ctree+0x2ba/0x2fa [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0x100/0x160 task_work_run+0x68/0xb0 exit_to_user_mode_prepare+0x1bb/0x1c0 syscall_exit_to_user_mode+0x4b/0x260 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f15ee221ee7 Code: ff 0b 00 f7 d8 64 89 (...) RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7 RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000 RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0 R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000 R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [] copy_process+0x8a0/0x1d70 softirqs last enabled at (0): [] copy_process+0x8a0/0x1d70 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace dd74718fef1ed5c8 ]--- BTRFS info (device sdc): space_info 4 has 268238848 free, is not full BTRFS info (device sdc): space_info total=268435456, used=114688, pinned=0, reserved=16384, may_use=0, readonly=65536 BTRFS info (device sdc): global_block_rsv: size 0 reserved 0 BTRFS info (device sdc): trans_block_rsv: size 0 reserved 0 BTRFS info (device sdc): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sdc): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sdc): delayed_refs_rsv: size 524288 reserved 0 And the crash, which only happens when we do not have crc32c hardware acceleration, produces the following trace immediately after those warnings: stack segment: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 1749129 Comm: umount Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_queue_work+0x36/0x190 [btrfs] Code: 54 55 53 48 89 f3 (...) RSP: 0018:ffffb27082443ae8 EFLAGS: 00010282 RAX: 0000000000000004 RBX: ffff94810ee9ad90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff94810ee9ad90 RDI: ffff947ed8ee75a0 RBP: a56b6b6b6b6b6b6b R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000007 R11: 0000000000000001 R12: ffff947fa9b435a8 R13: ffff94810ee9ad90 R14: 0000000000000000 R15: ffff947e93dc0000 FS: 00007f3cfe974840(0000) GS:ffff9481ac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1b42995a70 CR3: 0000000127638003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_wq_submit_bio+0xb3/0xd0 [btrfs] btrfs_submit_metadata_bio+0x44/0xc0 [btrfs] submit_one_bio+0x61/0x70 [btrfs] btree_write_cache_pages+0x414/0x450 [btrfs] ? kobject_put+0x9a/0x1d0 ? trace_hardirqs_on+0x1b/0xf0 ? _raw_spin_unlock_irqrestore+0x3c/0x60 ? free_debug_processing+0x1e1/0x2b0 do_writepages+0x43/0xe0 ? lock_acquired+0x199/0x490 __writeback_single_inode+0x59/0x650 writeback_single_inode+0xaf/0x120 write_inode_now+0x94/0xd0 iput+0x187/0x2b0 close_ctree+0x2c6/0x2fa [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0x100/0x160 task_work_run+0x68/0xb0 exit_to_user_mode_prepare+0x1bb/0x1c0 syscall_exit_to_user_mode+0x4b/0x260 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f3cfebabee7 Code: ff 0b 00 f7 d8 64 89 01 (...) RSP: 002b:00007ffc9c9a05f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007f3cfecd1264 RCX: 00007f3cfebabee7 RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 0000562b6b478000 RBP: 0000562b6b473a30 R08: 0000000000000000 R09: 00007f3cfec6cbe0 R10: 0000562b6b479fe0 R11: 0000000000000246 R12: 0000000000000000 R13: 0000562b6b478000 R14: 0000562b6b473b40 R15: 0000562b6b473c60 Modules linked in: btrfs dm_snapshot dm_thin_pool (...) ---[ end trace dd74718fef1ed5cc ]--- Finally when we remove the btrfs module (rmmod btrfs), there are several warnings about objects that were allocated from our slabs but were never freed, consequence of the transaction that was never committed and got leaked: ============================================================================= BUG btrfs_delayed_ref_head (Tainted: G B W ): Objects remaining in btrfs_delayed_ref_head on __kmem_cache_shutdown() ----------------------------------------------------------------------------- INFO: Slab 0x0000000094c2ae56 objects=24 used=2 fp=0x000000002bfa2521 flags=0x17fffc000010200 CPU: 5 PID: 1729921 Comm: rmmod Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8d/0xb5 slab_err+0xb7/0xdc ? lock_acquired+0x199/0x490 __kmem_cache_shutdown+0x1ac/0x3c0 ? lock_release+0x20e/0x4c0 kmem_cache_destroy+0x55/0x120 btrfs_delayed_ref_exit+0x11/0x35 [btrfs] exit_btrfs_fs+0xa/0x59 [btrfs] __x64_sys_delete_module+0x194/0x260 ? fpregs_assert_state_consistent+0x1e/0x40 ? exit_to_user_mode_prepare+0x55/0x1c0 ? trace_hardirqs_on+0x1b/0xf0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f693e305897 Code: 73 01 c3 48 8b 0d f9 f5 (...) RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8 RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740 R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760 INFO: Object 0x0000000050cbdd61 @offset=12104 INFO: Allocated in btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] age=1894 cpu=6 pid=1729873 __slab_alloc.isra.0+0x109/0x1c0 kmem_cache_alloc+0x7bb/0x830 btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] btrfs_free_tree_block+0x128/0x360 [btrfs] __btrfs_cow_block+0x489/0x5f0 [btrfs] btrfs_cow_block+0xf7/0x220 [btrfs] btrfs_search_slot+0x62a/0xc40 [btrfs] btrfs_del_orphan_item+0x65/0xd0 [btrfs] btrfs_find_orphan_roots+0x1bf/0x200 [btrfs] open_ctree+0x125a/0x18a0 [btrfs] btrfs_mount_root.cold+0x13/0xed [btrfs] legacy_get_tree+0x30/0x60 vfs_get_tree+0x28/0xe0 fc_mount+0xe/0x40 vfs_kern_mount.part.0+0x71/0x90 btrfs_mount+0x13b/0x3e0 [btrfs] INFO: Freed in __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] age=4292 cpu=2 pid=1729526 kmem_cache_free+0x34c/0x3c0 __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] btrfs_run_delayed_refs+0x81/0x210 [btrfs] commit_cowonly_roots+0xfb/0x300 [btrfs] btrfs_commit_transaction+0x367/0xc40 [btrfs] sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0x100/0x160 task_work_run+0x68/0xb0 exit_to_user_mode_prepare+0x1bb/0x1c0 syscall_exit_to_user_mode+0x4b/0x260 entry_SYSCALL_64_after_hwframe+0x44/0xa9 INFO: Object 0x0000000086e9b0ff @offset=12776 INFO: Allocated in btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] age=1900 cpu=6 pid=1729873 __slab_alloc.isra.0+0x109/0x1c0 kmem_cache_alloc+0x7bb/0x830 btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] btrfs_alloc_tree_block+0x2bf/0x360 [btrfs] alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs] __btrfs_cow_block+0x12d/0x5f0 [btrfs] btrfs_cow_block+0xf7/0x220 [btrfs] btrfs_search_slot+0x62a/0xc40 [btrfs] btrfs_del_orphan_item+0x65/0xd0 [btrfs] btrfs_find_orphan_roots+0x1bf/0x200 [btrfs] open_ctree+0x125a/0x18a0 [btrfs] btrfs_mount_root.cold+0x13/0xed [btrfs] legacy_get_tree+0x30/0x60 vfs_get_tree+0x28/0xe0 fc_mount+0xe/0x40 vfs_kern_mount.part.0+0x71/0x90 INFO: Freed in __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] age=3141 cpu=6 pid=1729803 kmem_cache_free+0x34c/0x3c0 __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] btrfs_run_delayed_refs+0x81/0x210 [btrfs] btrfs_write_dirty_block_groups+0x17d/0x3d0 [btrfs] commit_cowonly_roots+0x248/0x300 [btrfs] btrfs_commit_transaction+0x367/0xc40 [btrfs] close_ctree+0x113/0x2fa [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0x100/0x160 task_work_run+0x68/0xb0 exit_to_user_mode_prepare+0x1bb/0x1c0 syscall_exit_to_user_mode+0x4b/0x260 entry_SYSCALL_64_after_hwframe+0x44/0xa9 kmem_cache_destroy btrfs_delayed_ref_head: Slab cache still has objects CPU: 5 PID: 1729921 Comm: rmmod Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8d/0xb5 kmem_cache_destroy+0x119/0x120 btrfs_delayed_ref_exit+0x11/0x35 [btrfs] exit_btrfs_fs+0xa/0x59 [btrfs] __x64_sys_delete_module+0x194/0x260 ? fpregs_assert_state_consistent+0x1e/0x40 ? exit_to_user_mode_prepare+0x55/0x1c0 ? trace_hardirqs_on+0x1b/0xf0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f693e305897 Code: 73 01 c3 48 8b 0d f9 f5 0b (...) RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8 RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740 R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760 ============================================================================= BUG btrfs_delayed_tree_ref (Tainted: G B W ): Objects remaining in btrfs_delayed_tree_ref on __kmem_cache_shutdown() ----------------------------------------------------------------------------- INFO: Slab 0x0000000011f78dc0 objects=37 used=2 fp=0x0000000032d55d91 flags=0x17fffc000010200 CPU: 3 PID: 1729921 Comm: rmmod Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8d/0xb5 slab_err+0xb7/0xdc ? lock_acquired+0x199/0x490 __kmem_cache_shutdown+0x1ac/0x3c0 ? lock_release+0x20e/0x4c0 kmem_cache_destroy+0x55/0x120 btrfs_delayed_ref_exit+0x1d/0x35 [btrfs] exit_btrfs_fs+0xa/0x59 [btrfs] __x64_sys_delete_module+0x194/0x260 ? fpregs_assert_state_consistent+0x1e/0x40 ? exit_to_user_mode_prepare+0x55/0x1c0 ? trace_hardirqs_on+0x1b/0xf0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f693e305897 Code: 73 01 c3 48 8b 0d f9 f5 (...) RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8 RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740 R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760 INFO: Object 0x000000001a340018 @offset=4408 INFO: Allocated in btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] age=1917 cpu=6 pid=1729873 __slab_alloc.isra.0+0x109/0x1c0 kmem_cache_alloc+0x7bb/0x830 btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] btrfs_free_tree_block+0x128/0x360 [btrfs] __btrfs_cow_block+0x489/0x5f0 [btrfs] btrfs_cow_block+0xf7/0x220 [btrfs] btrfs_search_slot+0x62a/0xc40 [btrfs] btrfs_del_orphan_item+0x65/0xd0 [btrfs] btrfs_find_orphan_roots+0x1bf/0x200 [btrfs] open_ctree+0x125a/0x18a0 [btrfs] btrfs_mount_root.cold+0x13/0xed [btrfs] legacy_get_tree+0x30/0x60 vfs_get_tree+0x28/0xe0 fc_mount+0xe/0x40 vfs_kern_mount.part.0+0x71/0x90 btrfs_mount+0x13b/0x3e0 [btrfs] INFO: Freed in __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] age=4167 cpu=4 pid=1729795 kmem_cache_free+0x34c/0x3c0 __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] btrfs_run_delayed_refs+0x81/0x210 [btrfs] btrfs_commit_transaction+0x60/0xc40 [btrfs] create_subvol+0x56a/0x990 [btrfs] btrfs_mksubvol+0x3fb/0x4a0 [btrfs] __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs] btrfs_ioctl_snap_create+0x58/0x80 [btrfs] btrfs_ioctl+0x1a92/0x36f0 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 INFO: Object 0x000000002b46292a @offset=13648 INFO: Allocated in btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] age=1923 cpu=6 pid=1729873 __slab_alloc.isra.0+0x109/0x1c0 kmem_cache_alloc+0x7bb/0x830 btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] btrfs_alloc_tree_block+0x2bf/0x360 [btrfs] alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs] __btrfs_cow_block+0x12d/0x5f0 [btrfs] btrfs_cow_block+0xf7/0x220 [btrfs] btrfs_search_slot+0x62a/0xc40 [btrfs] btrfs_del_orphan_item+0x65/0xd0 [btrfs] btrfs_find_orphan_roots+0x1bf/0x200 [btrfs] open_ctree+0x125a/0x18a0 [btrfs] btrfs_mount_root.cold+0x13/0xed [btrfs] legacy_get_tree+0x30/0x60 vfs_get_tree+0x28/0xe0 fc_mount+0xe/0x40 vfs_kern_mount.part.0+0x71/0x90 INFO: Freed in __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] age=3164 cpu=6 pid=1729803 kmem_cache_free+0x34c/0x3c0 __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] btrfs_run_delayed_refs+0x81/0x210 [btrfs] commit_cowonly_roots+0xfb/0x300 [btrfs] btrfs_commit_transaction+0x367/0xc40 [btrfs] close_ctree+0x113/0x2fa [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0x100/0x160 task_work_run+0x68/0xb0 exit_to_user_mode_prepare+0x1bb/0x1c0 syscall_exit_to_user_mode+0x4b/0x260 entry_SYSCALL_64_after_hwframe+0x44/0xa9 kmem_cache_destroy btrfs_delayed_tree_ref: Slab cache still has objects CPU: 5 PID: 1729921 Comm: rmmod Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8d/0xb5 kmem_cache_destroy+0x119/0x120 btrfs_delayed_ref_exit+0x1d/0x35 [btrfs] exit_btrfs_fs+0xa/0x59 [btrfs] __x64_sys_delete_module+0x194/0x260 ? fpregs_assert_state_consistent+0x1e/0x40 ? exit_to_user_mode_prepare+0x55/0x1c0 ? trace_hardirqs_on+0x1b/0xf0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f693e305897 Code: 73 01 c3 48 8b 0d f9 f5 (...) RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8 RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740 R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760 ============================================================================= BUG btrfs_delayed_extent_op (Tainted: G B W ): Objects remaining in btrfs_delayed_extent_op on __kmem_cache_shutdown() ----------------------------------------------------------------------------- INFO: Slab 0x00000000f145ce2f objects=22 used=1 fp=0x00000000af0f92cf flags=0x17fffc000010200 CPU: 5 PID: 1729921 Comm: rmmod Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8d/0xb5 slab_err+0xb7/0xdc ? lock_acquired+0x199/0x490 __kmem_cache_shutdown+0x1ac/0x3c0 ? __mutex_unlock_slowpath+0x45/0x2a0 kmem_cache_destroy+0x55/0x120 exit_btrfs_fs+0xa/0x59 [btrfs] __x64_sys_delete_module+0x194/0x260 ? fpregs_assert_state_consistent+0x1e/0x40 ? exit_to_user_mode_prepare+0x55/0x1c0 ? trace_hardirqs_on+0x1b/0xf0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f693e305897 Code: 73 01 c3 48 8b 0d f9 f5 (...) RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8 RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740 R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760 INFO: Object 0x000000004cf95ea8 @offset=6264 INFO: Allocated in btrfs_alloc_tree_block+0x1e0/0x360 [btrfs] age=1931 cpu=6 pid=1729873 __slab_alloc.isra.0+0x109/0x1c0 kmem_cache_alloc+0x7bb/0x830 btrfs_alloc_tree_block+0x1e0/0x360 [btrfs] alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs] __btrfs_cow_block+0x12d/0x5f0 [btrfs] btrfs_cow_block+0xf7/0x220 [btrfs] btrfs_search_slot+0x62a/0xc40 [btrfs] btrfs_del_orphan_item+0x65/0xd0 [btrfs] btrfs_find_orphan_roots+0x1bf/0x200 [btrfs] open_ctree+0x125a/0x18a0 [btrfs] btrfs_mount_root.cold+0x13/0xed [btrfs] legacy_get_tree+0x30/0x60 vfs_get_tree+0x28/0xe0 fc_mount+0xe/0x40 vfs_kern_mount.part.0+0x71/0x90 btrfs_mount+0x13b/0x3e0 [btrfs] INFO: Freed in __btrfs_run_delayed_refs+0xabd/0x1290 [btrfs] age=3173 cpu=6 pid=1729803 kmem_cache_free+0x34c/0x3c0 __btrfs_run_delayed_refs+0xabd/0x1290 [btrfs] btrfs_run_delayed_refs+0x81/0x210 [btrfs] commit_cowonly_roots+0xfb/0x300 [btrfs] btrfs_commit_transaction+0x367/0xc40 [btrfs] close_ctree+0x113/0x2fa [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0x100/0x160 task_work_run+0x68/0xb0 exit_to_user_mode_prepare+0x1bb/0x1c0 syscall_exit_to_user_mode+0x4b/0x260 entry_SYSCALL_64_after_hwframe+0x44/0xa9 kmem_cache_destroy btrfs_delayed_extent_op: Slab cache still has objects CPU: 3 PID: 1729921 Comm: rmmod Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8d/0xb5 kmem_cache_destroy+0x119/0x120 exit_btrfs_fs+0xa/0x59 [btrfs] __x64_sys_delete_module+0x194/0x260 ? fpregs_assert_state_consistent+0x1e/0x40 ? exit_to_user_mode_prepare+0x55/0x1c0 ? trace_hardirqs_on+0x1b/0xf0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f693e305897 Code: 73 01 c3 48 8b 0d f9 (...) RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8 RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740 R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760 BTRFS: state leak: start 30408704 end 30425087 state 1 in tree 1 refs 1 Fix this issue by having the remount path stop the qgroup rescan worker when we are remounting RO and teach the rescan worker to stop when a remount is in progress. If later a remount in RW mode happens, we are already resuming the qgroup rescan worker through the call to btrfs_qgroup_rescan_resume(), so we do not need to worry about that. Tested-by: Fabian Vogt Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit c8dd8af4b35f1278d03a6c713e359ccc3e1ea020 Author: Vasily Averin Date: Thu Dec 17 11:53:40 2020 +0300 netfilter: ipset: fixes possible oops in mtype_resize [ Upstream commit 2b33d6ffa9e38f344418976b06057e2fc2aa9e2a ] currently mtype_resize() can cause oops t = ip_set_alloc(htable_size(htable_bits)); if (!t) { ret = -ENOMEM; goto out; } t->hregion = ip_set_alloc(ahash_sizeof_regions(htable_bits)); Increased htable_bits can force htable_size() to return 0. In own turn ip_set_alloc(0) returns not 0 but ZERO_SIZE_PTR, so follwoing access to t->hregion should trigger an OOPS. Signed-off-by: Vasily Averin Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit ca2fc0dc1cec3860c4a997c53b39a26f2ac1f102 Author: Masahiro Yamada Date: Sun Nov 22 04:36:55 2020 +0900 ARC: build: move symlink creation to arch/arc/Makefile to avoid race [ Upstream commit c5e6ae563c802c4d828d42e134af64004db2e58c ] If you run 'make uImage uImage.gz' with the parallel option, uImage.gz will be created by two threads simultaneously. This is because arch/arc/Makefile does not specify the dependency between uImage and uImage.gz. Hence, GNU Make assumes they can be built in parallel. One thread descends into arch/arc/boot/ to create uImage, and another to create uImage.gz. Please notice the same log is displayed twice in the following steps: $ export CROSS_COMPILE= $ make -s ARCH=arc defconfig $ make -j$(nproc) ARCH=arc uImage uImage.gz [ snip ] LD vmlinux SORTTAB vmlinux SYSMAP System.map OBJCOPY arch/arc/boot/vmlinux.bin OBJCOPY arch/arc/boot/vmlinux.bin GZIP arch/arc/boot/vmlinux.bin.gz GZIP arch/arc/boot/vmlinux.bin.gz UIMAGE arch/arc/boot/uImage.gz UIMAGE arch/arc/boot/uImage.gz Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2109376 Bytes = 2059.94 KiB = 2.01 MiB Load Address: 80000000 Entry Point: 80004000 Image arch/arc/boot/uImage is ready Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2815455 Bytes = 2749.47 KiB = 2.69 MiB Load Address: 80000000 Entry Point: 80004000 This is a race between the two threads trying to write to the same file arch/arc/boot/uImage.gz. This is a potential problem that can generate a broken file. I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images"). I highly recommend to avoid such build rules that cause a race condition. Move the uImage rule to arch/arc/Makefile. Another strangeness is that arch/arc/boot/Makefile compares the timestamps between $(obj)/uImage and $(obj)/uImage.*: $(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ @echo ' Image $@ is ready' This does not work as expected since $(obj)/uImage is a symlink. The symlink should be created in a phony target rule. I used $(kecho) instead of echo to suppress the message 'Image arch/arc/boot/uImage is ready' when the -s option is given. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin commit 6265a0f2410fce381a2a84f1b69992f204deecb9 Author: Masahiro Yamada Date: Sun Nov 22 04:36:54 2020 +0900 ARC: build: add boot_targets to PHONY [ Upstream commit 0cfccb3c04934cdef42ae26042139f16e805b5f7 ] The top-level boot_targets (uImage and uImage.*) should be phony targets. They just let Kbuild descend into arch/arc/boot/ and create files there. If a file exists in the top directory with the same name, the boot image will not be created. You can confirm it by the following steps: $ export CROSS_COMPILE= $ make -s ARCH=arc defconfig all # vmlinux will be built $ touch uImage.gz $ make ARCH=arc uImage.gz CALL scripts/atomic/check-atomics.sh CALL scripts/checksyscalls.sh CHK include/generated/compile.h # arch/arc/boot/uImage.gz is not created Specify the targets as PHONY to fix this. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin commit 217d8ba22bced113a9d2a043c527ff34eaf625c3 Author: Masahiro Yamada Date: Sun Nov 22 04:36:53 2020 +0900 ARC: build: add uImage.lzma to the top-level target [ Upstream commit f2712ec76a5433e5ec9def2bd52a95df1f96d050 ] arch/arc/boot/Makefile supports uImage.lzma, but you cannot do 'make uImage.lzma' because the corresponding target is missing in arch/arc/Makefile. Add it. I also changed the assignment operator '+=' to ':=' since this is the only place where we expect this variable to be set. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin commit b9128252b9ee6de9fe960b75f76c06e86921b9e3 Author: Masahiro Yamada Date: Sun Nov 22 04:36:52 2020 +0900 ARC: build: remove non-existing bootpImage from KBUILD_IMAGE [ Upstream commit 9836720911cfec25d3fbdead1c438bf87e0f2841 ] The deb-pkg builds for ARCH=arc fail. $ export CROSS_COMPILE= $ make -s ARCH=arc defconfig $ make ARCH=arc bindeb-pkg SORTTAB vmlinux SYSMAP System.map MODPOST Module.symvers make KERNELRELEASE=5.10.0-rc4 ARCH=arc KBUILD_BUILD_VERSION=2 -f ./Makefile intdeb-pkg sh ./scripts/package/builddeb cp: cannot stat 'arch/arc/boot/bootpImage': No such file or directory make[4]: *** [scripts/Makefile.package:87: intdeb-pkg] Error 1 make[3]: *** [Makefile:1527: intdeb-pkg] Error 2 make[2]: *** [debian/rules:13: binary-arch] Error 2 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 make[1]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2 make: *** [Makefile:1527: bindeb-pkg] Error 2 The reason is obvious; arch/arc/Makefile sets $(boot)/bootpImage as the default image, but there is no rule to build it. Remove the meaningless KBUILD_IMAGE assignment so it will fallback to the default vmlinux. With this change, you can build the deb package. I removed the 'bootpImage' target as well. At best, it provides 'make bootpImage' as an alias of 'make vmlinux', but I do not see much sense in doing so. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin commit 5349b17c3df5d62427ebf931851e8f421fad8a70 Author: Mikulas Patocka Date: Fri Jan 8 11:15:56 2021 -0500 dm integrity: fix flush with external metadata device [ Upstream commit 9b5948267adc9e689da609eb61cf7ed49cae5fa8 ] With external metadata device, flush requests are not passed down to the data device. Fix this by submitting the flush request in dm_integrity_flush_buffers. In order to not degrade performance, we overlap the data device flush with the metadata device flush. Reported-by: Lukas Straub Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer Signed-off-by: Sasha Levin commit c553300f1453c4bec9b2ba715d327b238963459d Author: Paulo Alcantara Date: Wed Jan 13 14:16:16 2021 -0300 cifs: fix interrupted close commands [ Upstream commit 2659d3bff3e1b000f49907d0839178b101a89887 ] Retry close command if it gets interrupted to not leak open handles on the server. Signed-off-by: Paulo Alcantara (SUSE) Reported-by: Duncan Findlay Suggested-by: Pavel Shilovsky Fixes: 6988a619f5b7 ("cifs: allow syscalls to be restarted in __smb_send_rqst()") Cc: stable@vger.kernel.org Reviewd-by: Pavel Shilovsky Signed-off-by: Steve French Signed-off-by: Sasha Levin commit d17a9571e392279b570c6baa67b203b5c16a9520 Author: Steve French Date: Mon Dec 2 17:55:41 2019 -0600 smb3: remove unused flag passed into close functions [ Upstream commit 9e8fae2597405ab1deac8909928eb8e99876f639 ] close was relayered to allow passing in an async flag which is no longer needed in this path. Remove the unneeded parameter "flags" passed in on close. Signed-off-by: Steve French Reviewed-by: Pavel Shilovsky Reviewed-by: Ronnie Sahlberg Signed-off-by: Sasha Levin commit 55a4dff288af5171310110f770d81d501af09faa Author: Theodore Ts'o Date: Thu Dec 17 13:24:15 2020 -0500 ext4: don't leak old mountpoint samples [ Upstream commit 5a3b590d4b2db187faa6f06adc9a53d6199fb1f9 ] When the first file is opened, ext4 samples the mountpoint of the filesystem in 64 bytes of the super block. It does so using strlcpy(), this means that the remaining bytes in the super block string buffer are untouched. If the mount point before had a longer path than the current one, it can be reconstructed. Consider the case where the fs was mounted to "/media/johnjdeveloper" and later to "/". The super block buffer then contains "/\x00edia/johnjdeveloper". This case was seen in the wild and caused confusion how the name of a developer ands up on the super block of a filesystem used in production... Fix this by using strncpy() instead of strlcpy(). The superblock field is defined to be a fixed-size char array, and it is already marked using __nonstring in fs/ext4/ext4.h. The consumer of the field in e2fsprogs already assumes that in the case of a 64+ byte mount path, that s_last_mounted will not be NUL terminated. Link: https://lore.kernel.org/r/X9ujIOJG/HqMr88R@mit.edu Reported-by: Richard Weinberger Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Sasha Levin commit 2003c669df4cbac00ab00cd2cd655fcc8ee87532 Author: yangerkun Date: Tue Jan 5 14:28:57 2021 +0800 ext4: fix bug for rename with RENAME_WHITEOUT [ Upstream commit 6b4b8e6b4ad8553660421d6360678b3811d5deb9 ] We got a "deleted inode referenced" warning cross our fsstress test. The bug can be reproduced easily with following steps: cd /dev/shm mkdir test/ fallocate -l 128M img mkfs.ext4 -b 1024 img mount img test/ dd if=/dev/zero of=test/foo bs=1M count=128 mkdir test/dir/ && cd test/dir/ for ((i=0;i<1000;i++)); do touch file$i; done # consume all block cd ~ && renameat2(AT_FDCWD, /dev/shm/test/dir/file1, AT_FDCWD, /dev/shm/test/dir/dst_file, RENAME_WHITEOUT) # ext4_add_entry in ext4_rename will return ENOSPC!! cd /dev/shm/ && umount test/ && mount img test/ && ls -li test/dir/file1 We will get the output: "ls: cannot access 'test/dir/file1': Structure needs cleaning" and the dmesg show: "EXT4-fs error (device loop0): ext4_lookup:1626: inode #2049: comm ls: deleted inode referenced: 139" ext4_rename will create a special inode for whiteout and use this 'ino' to replace the source file's dir entry 'ino'. Once error happens latter(the error above was the ENOSPC return from ext4_add_entry in ext4_rename since all space has been consumed), the cleanup do drop the nlink for whiteout, but forget to restore 'ino' with source file. This will trigger the bug describle as above. Signed-off-by: yangerkun Reviewed-by: Jan Kara Cc: stable@vger.kernel.org Fixes: cd808deced43 ("ext4: support RENAME_WHITEOUT") Link: https://lore.kernel.org/r/20210105062857.3566-1-yangerkun@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 425faacff21359f1c74f536a51a299bf841d2282 Author: Jani Nikula Date: Fri Jan 8 17:28:41 2021 +0200 drm/i915/backlight: fix CPU mode backlight takeover on LPT [ Upstream commit bb83d5fb550bb7db75b29e6342417fda2bbb691c ] The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight() functions operate directly on the hardware registers. If inverting the value is needed, using intel_panel_compute_brightness(), it should only be done in the interface between hardware registers and panel->backlight.level. The CPU mode takeover code added in commit 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the hardware register and converts to panel->backlight.level correctly, however the value written back should remain in the hardware register "domain". This hasn't been an issue, because GM45 machines are the only known users of i915.invert_brightness and the brightness invert quirk, and without one of them no conversion is made. It's likely nobody's ever hit the problem. Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") Cc: Maarten Lankhorst Cc: Ville Syrjälä Cc: Lyude Paul Cc: # v5.1+ Reviewed-by: Lyude Paul Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com (cherry picked from commit 0d4ced1c5bfe649196877d90442d4fd618e19153) Signed-off-by: Jani Nikula Signed-off-by: Sasha Levin commit 72eb9fc82aea6ce0e3d5b3fe3cc8a9819a6d2afb Author: Su Yue Date: Sun Jan 3 17:28:04 2021 +0800 btrfs: tree-checker: check if chunk item end overflows [ Upstream commit 347fb0cfc9bab5195c6701e62eda488310d7938f ] While mounting a crafted image provided by user, kernel panics due to the invalid chunk item whose end is less than start. [66.387422] loop: module loaded [66.389773] loop0: detected capacity change from 262144 to 0 [66.427708] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 12 /dev/loop0 scanned by mount (613) [66.431061] BTRFS info (device loop0): disk space caching is enabled [66.431078] BTRFS info (device loop0): has skinny extents [66.437101] BTRFS error: insert state: end < start 29360127 37748736 [66.437136] ------------[ cut here ]------------ [66.437140] WARNING: CPU: 16 PID: 613 at fs/btrfs/extent_io.c:557 insert_state.cold+0x1a/0x46 [btrfs] [66.437369] CPU: 16 PID: 613 Comm: mount Tainted: G O 5.11.0-rc1-custom #45 [66.437374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.437378] RIP: 0010:insert_state.cold+0x1a/0x46 [btrfs] [66.437420] RSP: 0018:ffff93e5414c3908 EFLAGS: 00010286 [66.437427] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.437431] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.437434] RBP: ffff93e5414c3938 R08: 0000000000000001 R09: 0000000000000001 [66.437438] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d72aa0 [66.437441] R13: ffff8ec78bc71628 R14: 0000000000000000 R15: 0000000002400000 [66.437447] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.437451] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.437455] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.437460] PKRU: 55555554 [66.437464] Call Trace: [66.437475] set_extent_bit+0x652/0x740 [btrfs] [66.437539] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.437576] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.437621] read_one_chunk+0x33c/0x420 [btrfs] [66.437674] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.437708] ? kvm_sched_clock_read+0x18/0x40 [66.437739] open_ctree+0xb32/0x1734 [btrfs] [66.437781] ? bdi_register_va+0x1b/0x20 [66.437788] ? super_setup_bdi_name+0x79/0xd0 [66.437810] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.437854] ? __kmalloc_track_caller+0x217/0x3b0 [66.437873] legacy_get_tree+0x34/0x60 [66.437880] vfs_get_tree+0x2d/0xc0 [66.437888] vfs_kern_mount.part.0+0x78/0xc0 [66.437897] vfs_kern_mount+0x13/0x20 [66.437902] btrfs_mount+0x11f/0x3c0 [btrfs] [66.437940] ? kfree+0x5ff/0x670 [66.437944] ? __kmalloc_track_caller+0x217/0x3b0 [66.437962] legacy_get_tree+0x34/0x60 [66.437974] vfs_get_tree+0x2d/0xc0 [66.437983] path_mount+0x48c/0xd30 [66.437998] __x64_sys_mount+0x108/0x140 [66.438011] do_syscall_64+0x38/0x50 [66.438018] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.438023] RIP: 0033:0x7f0138827f6e [66.438033] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.438040] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.438044] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [66.438047] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [66.438050] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [66.438054] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [66.438078] irq event stamp: 18169 [66.438082] hardirqs last enabled at (18175): [] console_unlock+0x4ff/0x5f0 [66.438088] hardirqs last disabled at (18180): [] console_unlock+0x467/0x5f0 [66.438092] softirqs last enabled at (16910): [] asm_call_irq_on_stack+0x12/0x20 [66.438097] softirqs last disabled at (16905): [] asm_call_irq_on_stack+0x12/0x20 [66.438103] ---[ end trace e114b111db64298b ]--- [66.438107] BTRFS error: found node 12582912 29360127 on insert of 37748736 29360127 [66.438127] BTRFS critical: panic in extent_io_tree_panic:679: locking error: extent tree was modified by another thread while locked (errno=-17 Object already exists) [66.441069] ------------[ cut here ]------------ [66.441072] kernel BUG at fs/btrfs/extent_io.c:679! [66.442064] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [66.443018] CPU: 16 PID: 613 Comm: mount Tainted: G W O 5.11.0-rc1-custom #45 [66.444538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.446223] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [66.450878] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [66.451840] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.453141] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.454445] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [66.455743] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [66.457055] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [66.458356] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.459841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.460895] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.462196] PKRU: 55555554 [66.462692] Call Trace: [66.463139] set_extent_bit.cold+0x30/0x98 [btrfs] [66.464049] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.490466] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.514097] read_one_chunk+0x33c/0x420 [btrfs] [66.534976] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.555718] ? kvm_sched_clock_read+0x18/0x40 [66.575758] open_ctree+0xb32/0x1734 [btrfs] [66.595272] ? bdi_register_va+0x1b/0x20 [66.614638] ? super_setup_bdi_name+0x79/0xd0 [66.633809] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.652938] ? __kmalloc_track_caller+0x217/0x3b0 [66.671925] legacy_get_tree+0x34/0x60 [66.690300] vfs_get_tree+0x2d/0xc0 [66.708221] vfs_kern_mount.part.0+0x78/0xc0 [66.725808] vfs_kern_mount+0x13/0x20 [66.742730] btrfs_mount+0x11f/0x3c0 [btrfs] [66.759350] ? kfree+0x5ff/0x670 [66.775441] ? __kmalloc_track_caller+0x217/0x3b0 [66.791750] legacy_get_tree+0x34/0x60 [66.807494] vfs_get_tree+0x2d/0xc0 [66.823349] path_mount+0x48c/0xd30 [66.838753] __x64_sys_mount+0x108/0x140 [66.854412] do_syscall_64+0x38/0x50 [66.869673] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.885093] RIP: 0033:0x7f0138827f6e [66.945613] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.977214] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.994266] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [67.011544] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [67.028836] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [67.045812] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [67.216138] ---[ end trace e114b111db64298c ]--- [67.237089] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [67.325317] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [67.347946] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [67.371343] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [67.394757] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [67.418409] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [67.441906] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [67.465436] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [67.511660] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [67.535047] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [67.558449] PKRU: 55555554 [67.581146] note: mount[613] exited with preempt_count 2 The image has a chunk item which has a logical start 37748736 and length 18446744073701163008 (-8M). The calculated end 29360127 overflows. EEXIST was caught by insert_state() because of the duplicate end and extent_io_tree_panic() was called. Add overflow check of chunk item end to tree checker so it can be detected early at mount time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Anand Jain Signed-off-by: Su Yue Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 82a948fc67eab1699572a956d6b052570202f4c7 Author: Leon Schuermann Date: Mon Jan 11 20:03:13 2021 +0100 r8152: Add Lenovo Powered USB-C Travel Hub commit cb82a54904a99df9e8f9e9d282046055dae5a730 upstream. This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to use the cdc_ether driver. However, using this driver, with the system suspended the device constantly sends pause-frames as soon as the receive buffer fills up. This causes issues with other devices, where some Ethernet switches stop forwarding packets altogether. Using the Realtek driver (r8152) fixes this issue. Pause frames are no longer sent while the host system is suspended. Signed-off-by: Leon Schuermann Tested-by: Leon Schuermann Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ad5f19c7e9ce899cb1eb556bc1fd67d2901122e1 Author: Mikulas Patocka Date: Tue Jan 12 14:54:47 2021 -0500 dm integrity: fix the maximum number of arguments commit 17ffc193cdc6dc7a613d00d8ad47fc1f801b9bf0 upstream. Advance the maximum number of arguments from 9 to 15 to account for all potential feature flags that may be supplied. Linux 4.19 added "meta_device" (356d9d52e1221ba0c9f10b8b38652f78a5298329) and "recalculate" (a3fcf7253139609bf9ff901fbf955fba047e75dd) flags. Commit 468dfca38b1a6fbdccd195d875599cb7c8875cd9 added "sectors_per_bit" and "bitmap_flush_interval". Commit 84597a44a9d86ac949900441cea7da0af0f2f473 added "allow_discards". And the commit d537858ac8aaf4311b51240893add2fc62003b97 added "fix_padding". Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 5caac6317daf545e42cd285730cd0f2fba4c3975 Author: Akilesh Kailash Date: Mon Dec 28 07:14:07 2020 +0000 dm snapshot: flush merged data before committing metadata commit fcc42338375a1e67b8568dbb558f8b784d0f3b01 upstream. If the origin device has a volatile write-back cache and the following events occur: 1: After finishing merge operation of one set of exceptions, merge_callback() is invoked. 2: Update the metadata in COW device tracking the merge completion. This update to COW device is flushed cleanly. 3: System crashes and the origin device's cache where the recent merge was completed has not been flushed. During the next cycle when we read the metadata from the COW device, we will skip reading those metadata whose merge was completed in step (1). This will lead to data loss/corruption. To address this, flush the origin device post merge IO before updating the metadata. Cc: stable@vger.kernel.org Signed-off-by: Akilesh Kailash Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 2017b99ec205b96d2d1561e770f96f6aeb40c6c8 Author: Mike Snitzer Date: Thu Sep 24 13:14:52 2020 -0400 dm raid: fix discard limits for raid1 commit cc07d72bf350b77faeffee1c37bc52197171473f upstream. Block core warned that discard_granularity was 0 for dm-raid with personality of raid1. Reason is that raid_io_hints() was incorrectly special-casing raid1 rather than raid0. Fix raid_io_hints() by removing discard limits settings for raid1. Check for raid0 instead. Fixes: 61697a6abd24a ("dm: eliminate 'split_discard_bios' flag from DM target interface") Cc: stable@vger.kernel.org Reported-by: Zdenek Kabelac Reported-by: Mikulas Patocka Reported-by: Stephan Bärwolf Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 4335af6c62fc620a7d8520f8502373c032aadde3 Author: Miaohe Lin Date: Tue Jan 12 15:49:24 2021 -0800 mm/hugetlb: fix potential missing huge page size info commit 0eb98f1588c2cc7a79816d84ab18a55d254f481c upstream. The huge page size is encoded for VM_FAULT_HWPOISON errors only. So if we return VM_FAULT_HWPOISON, huge page size would just be ignored. Link: https://lkml.kernel.org/r/20210107123449.38481-1-linmiaohe@huawei.com Fixes: aa50d3a7aa81 ("Encode huge page size for VM_FAULT_HWPOISON errors") Signed-off-by: Miaohe Lin Reviewed-by: Mike Kravetz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit c64366620d9198414bd80de27c969f0fcd2fabe4 Author: Dexuan Cui Date: Thu Jan 7 23:23:48 2021 -0800 ACPI: scan: Harden acpi_device_add() against device ID overflows commit a58015d638cd4e4555297b04bec9b49028369075 upstream. Linux VM on Hyper-V crashes with the latest mainline: [ 4.069624] detected buffer overflow in strcpy [ 4.077733] kernel BUG at lib/string.c:1149! .. [ 4.085819] RIP: 0010:fortify_panic+0xf/0x11 ... [ 4.085819] Call Trace: [ 4.085819] acpi_device_add.cold.15+0xf2/0xfb [ 4.085819] acpi_add_single_object+0x2a6/0x690 [ 4.085819] acpi_bus_check_add+0xc6/0x280 [ 4.085819] acpi_ns_walk_namespace+0xda/0x1aa [ 4.085819] acpi_walk_namespace+0x9a/0xc2 [ 4.085819] acpi_bus_scan+0x78/0x90 [ 4.085819] acpi_scan_init+0xfa/0x248 [ 4.085819] acpi_init+0x2c1/0x321 [ 4.085819] do_one_initcall+0x44/0x1d0 [ 4.085819] kernel_init_freeable+0x1ab/0x1f4 This is because of the recent buffer overflow detection in the commit 6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions") Here acpi_device_bus_id->bus_id can only hold 14 characters, while the the acpi_device_hid(device) returns a 22-char string "HYPER_V_GEN_COUNTER_V1". Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8 chars. The field bus_id in struct acpi_device_bus_id was originally defined as char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the commit bb0958544f3c ("ACPI: use more understandable bus_id for ACPI devices") Fix the issue by changing the field bus_id to const char *, and use kstrdup_const() to initialize it. Signed-off-by: Dexuan Cui Tested-By: Jethro Beekman [ rjw: Subject change, whitespace adjustment ] Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit bc0b70f1d28c5b152825c73b6616691a5388ae64 Author: Tom Rix Date: Tue Dec 29 18:46:53 2020 -0800 RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd() commit f2bc3af6353cb2a33dfa9d270d999d839eef54cb upstream. In ocrdma_dealloc_ucontext_pd() uctx->cntxt_pd is assigned to the variable pd and then after uctx->cntxt_pd is freed, the variable pd is passed to function _ocrdma_dealloc_pd() which dereferences pd directly or through its call to ocrdma_mbx_dealloc_pd(). Reorder the free using the variable pd. Cc: stable@vger.kernel.org Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core") Link: https://lore.kernel.org/r/20201230024653.1516495-1-trix@redhat.com Signed-off-by: Tom Rix Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit f7a97dc302bee9d230b1f8823f0f606a21b9de94 Author: Alexander Lobakin Date: Sun Jan 10 14:21:05 2021 +0000 MIPS: relocatable: fix possible boot hangup with KASLR enabled commit 69e976831cd53f9ba304fd20305b2025ecc78eab upstream. LLVM-built Linux triggered a boot hangup with KASLR enabled. arch/mips/kernel/relocate.c:get_random_boot() uses linux_banner, which is a string constant, as a random seed, but accesses it as an array of unsigned long (in rotate_xor()). When the address of linux_banner is not aligned to sizeof(long), such access emits unaligned access exception and hangs the kernel. Use PTR_ALIGN() to align input address to sizeof(long) and also align down the input length to prevent possible access-beyond-end. Fixes: 405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Alexander Lobakin Tested-by: Nathan Chancellor Reviewed-by: Kees Cook Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit f5c2f797068358050ce233ee1e611e0006e05412 Author: Paul Cercueil Date: Wed Dec 16 23:39:56 2020 +0000 MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB commit 4d4f9c1a17a3480f8fe523673f7232b254d724b7 upstream. The compressed payload is not necesarily 4-byte aligned, at least when compiling with Clang. In that case, the 4-byte value appended to the compressed payload that corresponds to the uncompressed kernel image size must be read using get_unaligned_le32(). This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic JZ4770 board). Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel") Cc: # v4.7 Signed-off-by: Paul Cercueil Reviewed-by: Nick Desaulniers Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit a650107de3744b2bc9d91d71c1e203ba61115b2e Author: Anders Roxell Date: Fri Dec 11 11:24:37 2020 +0100 mips: lib: uncached: fix non-standard usage of variable 'sp' commit 5b058973d3205578aa6c9a71392e072a11ca44ef upstream. When building mips tinyconfig with clang the following warning show up: arch/mips/lib/uncached.c:45:6: warning: variable 'sp' is uninitialized when used here [-Wuninitialized] if (sp >= (long)CKSEG0 && sp < (long)CKSEG2) ^~ arch/mips/lib/uncached.c:40:18: note: initialize the variable 'sp' to silence this warning register long sp __asm__("$sp"); ^ = 0 1 warning generated. Rework to make an explicit inline move, instead of the non-standard use of specifying registers for local variables. This is what's written from the gcc-10 manual [1] about specifying registers for local variables: "6.47.5.2 Specifying Registers for Local Variables ................................................. [...] "The only supported use for this feature is to specify registers for input and output operands when calling Extended 'asm' (*note Extended Asm::). [...]". [1] https://docs.w3cub.com/gcc~10/local-register-variables Signed-off-by: Anders Roxell Reported-by: Nathan Chancellor Reported-by: Naresh Kamboju Reviewed-by: Nick Desaulniers Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit bda45bbc8e033b1d4ee050b3f7bcb1d5cc3aff23 Author: Anders Roxell Date: Fri Nov 27 09:39:43 2020 +0100 mips: fix Section mismatch in reference commit ad4fddef5f2345aa9214e979febe2f47639c10d9 upstream. When building mips tinyconfig with clang the following error show up: WARNING: modpost: vmlinux.o(.text+0x1940c): Section mismatch in reference from the function r4k_cache_init() to the function .init.text:loongson3_sc_init() The function r4k_cache_init() references the function __init loongson3_sc_init(). This is often because r4k_cache_init lacks a __init annotation or the annotation of loongson3_sc_init is wrong. Remove marked __init from function loongson3_sc_init(), mips_sc_probe_cm3(), and mips_sc_probe(). Signed-off-by: Anders Roxell Reviewed-by: Nick Desaulniers Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit aeb64ef1f4297cfeb7507a7c57061d03584c8963 Author: Masami Hiramatsu Date: Fri Jan 8 13:19:38 2021 +0900 tracing/kprobes: Do the notrace functions check without kprobes on ftrace commit 7bb83f6fc4ee84e95d0ac0d14452c2619fb3fe70 upstream. Enable the notrace function check on the architecture which doesn't support kprobes on ftrace but support dynamic ftrace. This notrace function check is not only for the kprobes on ftrace but also sw-breakpoint based kprobes. Thus there is no reason to limit this check for the arch which supports kprobes on ftrace. This also changes the dependency of Kconfig. Because kprobe event uses the function tracer's address list for identifying notrace function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether the target function is notrace or not. Link: https://lkml.kernel.org/r/20210105065730.2634785-1-naveen.n.rao@linux.vnet.ibm.com Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 45408c4f92506 ("tracing: kprobes: Prohibit probing on notrace function") Acked-by: Naveen N. Rao Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 984f57e4258c08442595365ee4a7a65b9cbfb68b Author: Wei Liu Date: Tue Jan 5 17:50:43 2021 +0000 x86/hyperv: check cpu mask after interrupt has been disabled commit ad0a6bad44758afa3b440c254a24999a0c7e35d5 upstream. We've observed crashes due to an empty cpu mask in hyperv_flush_tlb_others. Obviously the cpu mask in question is changed between the cpumask_empty call at the beginning of the function and when it is actually used later. One theory is that an interrupt comes in between and a code path ends up changing the mask. Move the check after interrupt has been disabled to see if it fixes the issue. Signed-off-by: Wei Liu Cc: stable@kernel.org Link: https://lore.kernel.org/r/20210105175043.28325-1-wei.liu@kernel.org Reviewed-by: Michael Kelley Signed-off-by: Greg Kroah-Hartman commit 1a202b9b9d238f6c88b00683ccd7da706c79c9d3 Author: Thomas Hebb Date: Sat Dec 12 17:20:12 2020 -0800 ASoC: dapm: remove widget from dirty list on free commit 5c6679b5cb120f07652418524ab186ac47680b49 upstream. A widget's "dirty" list_head, much like its "list" list_head, eventually chains back to a list_head on the snd_soc_card itself. This means that the list can stick around even after the widget (or all widgets) have been freed. Currently, however, widgets that are in the dirty list when freed remain there, corrupting the entire list and leading to memory errors and undefined behavior when the list is next accessed or modified. I encountered this issue when a component failed to probe relatively late in snd_soc_bind_card(), causing it to bail out and call soc_cleanup_card_resources(), which eventually called snd_soc_dapm_free() with widgets that were still dirty from when they'd been added. Fixes: db432b414e20 ("ASoC: Do DAPM power checks only for widgets changed since last run") Cc: stable@vger.kernel.org Signed-off-by: Thomas Hebb Reviewed-by: Charles Keepax Link: https://lore.kernel.org/r/f8b5f031d50122bf1a9bfc9cae046badf4a7a31a.1607822410.git.tommyhebb@gmail.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 82d1a5f6f2e5cc95b80a0e9cff9ee3654b61fe29 Author: Su Yue Date: Sun Jan 3 17:28:03 2021 +0800 btrfs: prevent NULL pointer dereference in extent_io_tree_panic commit 29b665cc51e8b602bf2a275734349494776e3dbc upstream. Some extent io trees are initialized with NULL private member (e.g. btrfs_device::alloc_state and btrfs_fs_info::excluded_extents). Dereference of a NULL tree->private as inode pointer will cause panic. Pass tree->fs_info as it's known to be valid in all cases. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 Fixes: 05912a3c04eb ("btrfs: drop extent_io_ops::tree_fs_info callback") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Anand Jain Signed-off-by: Su Yue Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit bb562e6e0358fe0ecf6853f28dab615e90389f9a Author: Olaf Hering Date: Sun Oct 11 20:54:31 2020 +0200 kbuild: enforce -Werror=return-type commit 172aad81a882443eefe1bd860c4eddc81b14dd5b upstream. Catch errors which at least gcc tolerates by default: warning: 'return' with no value, in function returning non-void [-Wreturn-type] Signed-off-by: Olaf Hering Signed-off-by: Masahiro Yamada Cc: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman