## -*- mode: shell-script; -*- 
##
## To be able to make changes to the part of configuration created
## from this configlet you need to copy this file to the directory
## fwbuilder/configlets/linux317/ in your home directory and modify it.
## Double "##" comments are removed during processing but single "#"
## comments are be retained and appear in the generated script. Empty
## lines are removed as well.  
##
## Configlets support simple macro language with these constructs:
## {{$var}} is variable expansion
## {{if var}} is conditional operator.
##
############ VLAN ##############################################
## /proc/net/vlan/config
##
## VLAN Dev name  | VLAN ID
## Name-Type: VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD
## eth1.100       | 100  | eth1
## eth1.101       | 101  | eth1
## eth1.102       | 102  | eth1
##
## Note about vlans: "ip link show" does not always accurately shows
## relationship between vlan subinterfaces and their parents. Example of
## the output where this happens (Sveasoft firmware for Linksys):
##
##  ip link show | grep vlan
##  7: vlan0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc noqueue
##  8: vlan1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
missing_vlan() {
    vlan=$1
    cmd=$2

    oldIFS=$IFS
    IFS="@"
    set $vlan
    subint=$1
    parent=$2
    IFS=$oldIFS

    vlan_id=$(echo $subint | sed -r 's/(vlan|[^.]*\.)//')
    test "$cmd" = "add" && {
        echo $subint | grep -q "vlan" && name_type="VLAN_PLUS_VID" || name_type="DEV_PLUS_VID"
        test "$vlan_id" \< "1" || name_type="${name_type}_NO_PAD"
        echo "# Adding VLAN interface $subint (parent: $parent)"
        $FWBDEBUG $VCONFIG set_name_type $name_type
        $FWBDEBUG $VCONFIG $cmd $parent $vlan_id
        $FWBDEBUG $IP link set $subint up
    }
    test "$cmd" = "rem" && {
        echo "# Removing VLAN interface $subint (parent: $parent)"
        $FWBDEBUG $VCONFIG $cmd $subint
    }
}

parse_fwb_vlans() {
    set $1 
    vlan_parent_interface=$1 
    shift

    FWB_VLANS=$(
      for subint in $*; do
        echo "${subint}@$vlan_parent_interface"
      done | sort
    )
    echo $FWB_VLANS
}

parse_current_vlans() {
    vlan_parent_interface=$1
    CURRENT_VLANS=""
    PROC_DIR="/proc/net/vlan/"
    test -d $PROC_DIR || $MODPROBE 8021q || {
        echo "$PROC_DIR does not exist. Vlan interfaces are not available."
        exit 1
    }

    test -f "/proc/net/vlan/config" && {
        CURRENT_VLANS=$(
            cat /proc/net/vlan/config | grep -v 'Dev name' | grep $vlan_parent_interface | \
                while read subint a vlan_id b parent; do
                echo "${subint}@$parent"
            done | sort
        )
    }
    echo $CURRENT_VLANS
}

update_vlans_of_interface() {
    args="$1"
    set $1 
    vlan_parent_interface=$1 

    FWB_VLANS=$(parse_fwb_vlans "$args")
    CURRENT_VLANS=$(parse_current_vlans $vlan_parent_interface)

    $IP link set $vlan_parent_interface up
    diff_intf missing_vlan "$FWB_VLANS" "$CURRENT_VLANS" add
    diff_intf missing_vlan "$CURRENT_VLANS" "$FWB_VLANS" rem
}

add_vlans() {
    args="$1"
    set $1 
    vlan_parent_interface=$1 

    FWB_VLANS=$(parse_fwb_vlans $args)
    CURRENT_VLANS=$(parse_current_vlans $vlan_parent_interface)

    $IP link set $vlan_parent_interface up
    diff_intf missing_vlan "$FWB_VLANS" "$CURRENT_VLANS" add
}

## This function removes vlan interfaces not configured in fwbuilder.
## Missing vlans are added using function update_vlans
##
##  clear_vlans_except_known eth1.100@eth1 eth1.101@eth1 vlan200@eth2
##
## Call shown above would keep listed vlans but remove eth3.300
##
clear_vlans_except_known() {
    FWB_VLANS=$*
    CURRENT_VLANS=$(parse_current_vlans '|')

    diff_intf missing_vlan "$CURRENT_VLANS" "$FWB_VLANS" rem
}
